Sweetcrispy 3CHDG-01 Mobile Lateral Filing Cabinet Instruction Manual

: June 15, 2024
: Sweetcrispy

3CHDG-01 Mobile Lateral Filing Cabinet

Mobile Lateral Filing Cabinet

Specifications:

Model: 3CHDG-01
Product Type: Mobile Lateral Filing Cabinet

Package List:

A – 36 Dowels
B – 12 Wooden Dowels
C – 36 Eccentric Wheels
D – 2 Slide Rails
E – 2 Lockable Casters
F – 44 Rods
G – 3 Screws (M4x10)
H – 2 Slide Rail Lockable Casters
I – 28 Buckles
J – 4 Wire Holes
K – 8 Cover-up Stickers
L – 8 Shelf Pins
M – 14 Screws (M4x14)
N – 1 Screwdriver
O – 2 Wire Holes

Step-by-Step Instructions:

Step 1:

Fix Dowel (A)6 to the Board (1). And attach Wooden Dowel (B)4
to the Board (4) as shown.

Note:

Put a blanket under the Board to avoid scratch or damage.
Please do not screw Dowel too deep or too shallow.
Make sure the Wooden Dowel is installed in the correct
position.

Step 2:

Attach Wooden Dowel (B)8 to the Boards (2&3). Attach Slide
Rail (CL)2 to the Board (2), and Slide Rail (CR)2 to the Board
(3) with Screws (G)8.

Note:

As shown, make sure the Board and Slide Rail are oriented
correctly.
Install the Screws in holes #3 and #11 in this step.
When installing, please make sure the Screws are flattened, not
crooked. Otherwise, the drawers will not be installed
perfectly.

Step 3:

Separate Slide Rail (E) into the E1 and E2 parts by pressing it
in the indicated direction. Grip the E1 part while sliding the E2
part.

Step 4:

Locate the holes from the back of the Slide Rail (E1). Then
install Slide Rail (E1)2 to the Boards (2&3) with Screws
(G)4.

Note:

Install the Slide Rail against the rear of the Board.
Please install hole #1 first, then hole #10.

Step 5:

Fix Dowel (A)6 to the Board (5). According to the Board
position as shown, attach Boards (4&3&2) to the Board (5)
with Eccentric Wheel (C)6.

Note:

Connect the grooves on the Boards (4&3&2) to the grooves
on the Board (5).

Step 6:

Attach Wire Hole (O)*2 completely to the Board (14). Insert the
Boards (14&6) into the grooves of the Boards
(2&3&4).

Step 7:

Attach Board (1) to the Boards (2&3&4) with Eccentric
Wheel (C)*6.

Step 8:

Attach Lockable Casters (I) to the Boards (8&11) with Screws
(G)*20.

Step 9:

Fix Dowel (A)*8 to the Boards (8&11).

Step 10:

Fix Board (9)2 to both sides of the Board (8) with Eccentric
Wheel (C)4 and slide the Board (10) into the installed Board
groove. Then fix Board (9)2 to both sides of the Board (11) with
Eccentric Wheel (C)4.

Step 11:

Turn the installed Drawer over. Attach Slide Rails (DL&DR)
to the Boards (9)2 on each side of the drawer with Screws
(G)4.

Note:

According to the FRONT of the Drawer, distinguish the left and
right side of the Slide Rail.

Frequently Asked Questions:

Q: What should I do if I screw the Dowel too deep or too

shallow?

A: If you screw the Dowel too deep or too shallow, it may affect
the stability of the product. It is recommended to unscrew and
reposition the Dowel correctly.

Q: How do I ensure that the Slide Rail is oriented

correctly?

A: When attaching the Slide Rail, make sure to align it with the
correct position on the Board as shown in the instructions. The
orientation is crucial for proper installation of the drawers.

Q: Can I install the Slide Rail Screws crooked?

A: No, it is important to install the Slide Rail Screws in a
flattened position. If they are installed crooked, it may result in
imperfect installation of the drawers.

Mobile Lateral Filing Cabinet
Instruction Manual
3CHDG-01

Mobile Lateral Filing Cabinet
5
2 6 14
1
3
2
7
3
4 1

1

8

9

10

11

9

3 13
10 15

2 8
9

10

12

9

16

13
Board

Package List
A X36

B X12

C X36

Dowel
D X2

Wooden Dowel
E X2

Eccentric Wheel
F X2

= =

CL
+ DL
+ DR

CR
Slide Rail

Rod
G X44
M4x10

E1

Screws
H X3

E2
360° Swivel Casters
I X2
Slide Rai Lockable Casters

J X28

K X4

L X8

Cover-up Sticker
M X8
M4x14

Shelf Pin
N X1

Screws

Screwdriver

Buckle
O X2
Wire Hole

CR

CL DR
DL

TIPS: As shown, make sure each part is in the correct position.
Make sure the gap of the Eccentric Wheel is aligned with the Dowel, and then tighten it completely.

Step 1
DEV ISE
1

V

A X6 B X4
A ×6

B ×4
4

Fix Dowel (A)6 to the Board (1). And attach Wooden Dowel (B)4 to the Board (4) as shown

Note:

4/21

1. Put a blanket under the Board to avoid scratch or damage.

2. Please do not screw Dowel too deep or too shallow.

3. Make sure the Wooden Dowel is installed in the correct position.

Step 2
B ×8

B X8
CR X2

G X8
M4x10
CL X2

FRONT G G

TOP

FRONT

G
G
2

CL

CR

G

G G
3

BOTTOM

G

CL FRONT

13

11

15

Attach Wooden Dowel (B)8 to the Boards (2&3). Attach Slide Rail (CL)2 to theBoard (2), and Slide Rail (CR)2 to the Board (3) with Screws (G)8.

Note:
1. As shown, make sure the Board and Slide Rail are oriented correctly. 2. Install the Screws in holes #3 and #11 in this step. 3. When installing, please make sure the Screws are flattened, not
crooked. Otherwise the drawers will not be installed perfectly.

Step 3
E1
PRESS

PULL
E2

PULL

E1

E2

E1 E2
As shown, press Slide Rail (E) in the indicated direction to separate it into the E1 and E2 parts. Please grip the E1 part while sliding the E2 part.

Step 4

FRONT

TOP

FRONT

G X4
M4x10
E1 X2

2

3

G BOTTOM G

G

FRONT
1
FRONT

G

10 12

E1 Back

E1 Front

Locate the holes from the back of the Slide Rail (E1). Then install Slide Rail (E1)2 to the Boards (2&3) with Screws (G)4.
Note: 1. 1.Install the Slide Rail against the rear of the Board. 2. Please install hole #1 first, then hole #10.

Step 5

A6

A X6 C X6

5

4

3

2

5

C ×6

4

3

2

5

Fix Dowel (A)6 to the Board (5). According to the Board position as shown attach Boards (4&3&2) to the Board (5) with Eccentric Wheel (C)6.
Note: Connect the grooves on the Boards (4&3&2) to the grooves on the Board (5).

Step 6
O

O
14

O X2

14

6

Attach Wire Hole (O)*2 completely to the Board (14). Insert the Boards (14&6) into the grooves of the Boards (2&3&4).
Step 7

C6

C X6

1 1

4

2

4

2

Attach Board (1) to the Boards (2&3&4) with Eccentric Wheel (C)*6.

Step 8

I

Lockable casters

H X3

H

360° Swivel Casters

H

I

H

1

I

G X20
M4x10
I X2
H

G 20
FRONT
Attach Lockable Casters (I)2 to the front side of the Board (1) and 360° Swivel Casters (H)3 to its back side with Screws (G)*20.
Step 9

A8
8

A X8

11

Fix Dowel (A)*8 to the Boards (8&11).

Step 10

8 9
C4

9
8 9

C X8
9

9 9
10
9
9 9
11

9 11
C4

Fix Board (9)2 to both sides of the Board (8) with Eccentric Wheel (C)4 and slide the Board (10) into the installed Board groove. Then fix Board (9)2 to both sides of the Board (11) with Eccentric Wheel (C)4.

Step 11

DR X1

G X4
M4x10
DL X1

G

DL

DR FRONT

FRONT

×2

G

DL FRONT

13

10 12

Turn the installed Drawer over. Attach Slide Rails (DL&DR) to the Boards (9)2 on each side of the drawer with Screws (G)4.

Note:
1. According to the “FRONT” of the Drawer, distinguish the left and right side of the Slide Rail.
2. Install the Slide Rail against the Board (11). 3. Install the Screws in holes #3 and #10 in this step.

Step 12

A8

8 12

C X8 A X8

8 9
9
C4
8 9
9

9 9
10
9
9 9
12

9 12
C4

Fix Dowel (A)8 to the Boards (8&12). Fix Board (9)2 to both sides of the Board (8) with Eccentric Wheel (C)4, and slide the Board (10) into the installed Board groove. Then fix Board (9)2 to both sides of the Board (12) with Eccentric Wheel (C)*4.

Step 13

DR X1

G X4
M4x10
DL X1

G

DL

DR FRONT

FRONT

×2

G

DL FRONT

13

10 12

Turn the installed Drawer over. Attach Slide Rails (DL&DR) to the Boards (9)2 on each side of the drawer with Screws (G)4.

Note:
1. According to the “FRONT” of the Drawer, distinguish the left and right side of the Slide Rail.
2. Install the Slide Rail against the Board (12). 3. Install the Screws in holes #3 and #10 in this step

Step 14
A8

15 16

A X8 C X4

16 13
13

C4

1 6

13

FRONT

16
13 13
10
Fix Dowel (A)8 to the Boards (15&16). Fix Board (13)2 to both sides of the Board (16) with Eccentric Wheel (C)*4, and slide the Board (10) into the installed Board groove.

Step 15

(1)

F X2

A4 (2)
Letter Size

F
16 13

F
15

Insert the Rod (F)*2 into the hole of the Boards (15&16) to secure them.
As shown in Fig. (1) installation method, the A4 Size file can be hung after installation. As shown in Fig. (2) installation method, the Letter Size file can be hung after installation.
Step 16
C X4
16

C4

15

Fix Board (13)2 to both sides of the Board (15) with Eccentric Wheel (C)4.

Step 17

G

E2

FRONT

G X4
M4x10
E2 X2

G G
E2

FRONT

G
E2 FRONT

97

3

Attach Slide Rail (E2)2 to the Board (13)2 on both sides of the Drawer with Screws (G)*4.

Note:
1. Make sure the Slide Rail is oriented correctly. 2. Install the Slide Rail against the Board (16). 3. Install the Screws in holes #3 and #7 in this step.

Step 18

1
FRONT

FRONT

2
FRONT

FRONT

BALL BEARING BALL BEARING

Please full extend the Slide Rail (E1)*2. Simply push the Ball Bearing cart all the way to the end of the slide.

Step 19
Align the Slide Rail on the Drawer with the unit and push it carefully inside until it stops. Note: If the drawer does not go in smoothly please take it out and repeat the step.

Step 20
K X4

Attach Shelf Pin (K)*4 to the Boards (3&4).
Step 21
7

K ×4
7

Put the Board (7) into it, make the groove on Board (7) match with the Shelf Pin (K).

Step 22
J X28
J ×28
Using Cover-up Sticker (J)28 to cover the exposed part of Screws.
Step 23
M X8
M4x14
L X8
M L
L + M ×8
As shown, fix Buckle (L)8 on the back of the installed Mobile Lateral Filing Cabinet with Screws (M)*8.

Thank you for choosing this product. We strive to provide you with the best quality products and service in the industry. Should you have any issues, please don’t hesitate to contact us.