A LED 5702063222720 Calida Nano Table Lamp User Manual

June 4, 2024
A LED

A LED 5702063222720 Calida Nano Table Lamp

A LED 5702063222720 Calida Nano Table Lamp

HOW TO USE IT?

Pressing the push-button switch, in order:

  1.  Turn on at 30% brightness;
  2.  Increase up to 50% of light intensity;
  3.  100% of light intensity;
  4.  Turn-off.

Indicator light

  • The indicator light will turn to red when the battery is low.
  • The indicator light will turn to green when the battery is fully charged.
  • Pushing the switch at least for 3 seconds, the color temperature can be selected between 2200K or 2700K.

WARNING!

  • The safety of this fiƫng can only be guaranteed if these instructions are observed, during both installation and use.
  • The product contains Li-on baƩeries inside. Please keep it away from fire, strong vibraƟon, exposure to sunshine or any improper use.
  • Please keep the product away from wet locations while charging to avoid potential damage.

REMARKS

  •  When installing and whenever acƟng on the appliance, ensure that the power supply has been switched off.
  •  The appliance may in no way be modified or tampered with, any modificaƟon may compromise safety causing appliance to become dangerous.
  • We decline all responsibility for products that are modified.
  •  The light source cannot be replaced by the customer.
  •  The baƩery inside cannot be replaced by the customer

SPECIFICATION

  • Lamp DescripƟon: LED 0,8W 2200K/2700K 100lm
  • Color rendering index: CRI 90
  • Input voltage: 5 VDC
  • Charging Ɵme: 4 Hours
  • BaƩery capacity: 2,000 mAh
  • Service Ɵme: 8 Hours with full brightness
  • Service Ɵme: 16 Hours with 50% brightness
  • Dimming method: push buƩon step dimming
  • Dimming range: 30%-50%-100%
  • Enviroment: indoor use
  • IP RaƟng: IP54
  • Working temperature: -5°C ~ 35°C
  • Charging temperature: 0°C ~ 35°C
  • ConstrucƟon material: Acrylonitrile Butadiene Styrene
  • Charging method: Charger plate
  • Warranty: 3 years limited warranty

BATTERY RECHARGE.

CHARGING BY CHARGER PLATE

  • Connect the charger plate to charger( not included), then put the product on the charger plate when the indicator light on the lamp shade turns to red.
  • This table lamp can be recharged by various 5V 1A or 5V 2A chargers for smart phones, or any charger complied with USB PD ( power delivery) protocol. However, a charger plate is a must to recharge the product.
  • We only use high-quality Lithium batteries in this product, with over 1500 recharges guaranteed.

Charger plates are excluded!A LED 5702063222720 Calida Nano Table Lamp
3

Documents / Resources

| A LED 5702063222720 Calida Nano Table Lamp [pdf] User Manual
5702063222720, Calida Nano Table Lamp, 5702063222720 Calida Nano Table Lamp, Nano Table Lamp, Table Lamp, Lamp
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals