Zacurate 500BL Fingertip Pulse Oximeter User Guide
- June 15, 2024
- Zacurate
Table of Contents
Zacurate 500BL Fingertip Pulse Oximeter
Specifications
- Product: Zacurate Fingertip Pulse Oximeter
- Battery: 2x AAA alkaline batteries
- Accuracy: +/-2%
- Display Range: 25 bpm to 250 bpm
- Recording: Real-time readings only
- Latex-free: Yes
- Finger Chamber Material: Hypoallergenic medical grade silicone
Product Usage Instructions
Battery Installation:
To install the batteries, follow these steps:
- Locate the battery compartment on the back of the pulse oximeter.
- Slide the battery cover and lift it to open the compartment.
- Insert 2x AAA alkaline batteries, ensuring correct polarity.
- Close the battery compartment by sliding the cover back into place.
Taking Readings:
To take accurate readings using the Zacurate Fingertip Pulse Oximeter,
please follow these guidelines:
- Sit down and relax in a comfortable position.
- Ensure your hands are clean and dry.
- Place your finger inside the device’s finger chamber, making sure it is fully inserted.
- Press the power button to turn on the pulse oximeter.
- Remain still and avoid any unnecessary movement during the reading.
- Wait for a few seconds until the pulse rate and blood oxygen level (SpO2) readings stabilize.
- Read the results displayed on the LED screen.
Battery Life and Indicator
The battery life of the Zacurate pulse oximeter is approximately 30-40 hours of active use, depending on the model. To check the battery capacity:
- Observe the battery indicator on the device.
- If all the red lights are lit up and the indicator is full, it indicates that the batteries are fully charged.
FAQ
Can readings be seen in the dark with an LED screen?
The red LED light can certainly be seen in the dark.
What kind of battery does the Zacurate pulse oximeter use?
The Zacurate fingertip pulse oximeter uses 2x AAA alkaline batteries.
Does this pulse oximeter provide blood pressure readings?
The pulse oximeter measures the SpO2 (blood oxygen level) and the pulse rate. It does not measure blood pressure.
Does this pulse oximeter measure heart or pulse rate?
The pulse oximeter measures both the heart/pulse rate.
What is highest beats per minute (bpm) that this monitor can measure?
The display range for the Zacurate oximeter pulse rate is between 25 bpm to 250 bpm.
What type of batteries can be used to replace the batteries that come with the product?
The pulse oximeter requires 2x AAA alkaline batteries. We do not suggest that you use rechargeable batteries because some may not work with the device.
Does this unit record data for long periods of time?
The pulse oximeter simply gives real time readings of the pulse rate and blood oxygen level (SpO2). It does not record data.
What is the real accuracy deviation of this Zacurate Oximeter?
The pulse oximeter has an accuracy level of +/-2%.
Are Zacurate pulse oximeters latex free?
Our pulse oximeter is latex free. In fact the hypoallergenic finger chamber is made of medical grade silicone.
What are normal oxygen saturation levels?
The normal reading for blood oxygen is typically in the 95-100 range. However, there are certain conditions where this may not apply. Your doctor will be in the best position to advice where your readings should be.
Can I wear the pulse oximeter around my neck while on the treadmill to keep track of my oxygen and heart rate?
We usually advise users of our pulse oximeters to keep their hand still while taking a reading because any movement can cause the device to reset its' reading. If you are in the middle of exercising, we advise to take readings during resting phases while the body is not mobile.
Will this device show irregular heart rate like in a person with A-fib or A-flutter?
The pulse oximeter simply provides readings for your pulse rate and blood oxygen level (SpO2). You may want to check with your physician who will be in a better position to advice on what to look out for especially if you have a medical condition like a-fib.
Will this work at higher altitudes (approximately 8,000 to 12,000 feet elevation)?
The pulse oximeter is calibrated to work at sea level. While you can still use it at high elevation, you will need to know the normal range of your SpO2 at that elevation. Every individual is different and your doctor would be in the best position to provide the most accurate answer to this question. For this reason, we advise to consult your physician.
How do I know if I have full battery capacity?
When the battery indicator is full and the red lights are all lit up, it is an indication that the batteries are full.
What is the battery life of Zacurate pulse oximeters?
The batteries usually last approximately 30-40 hours of active use depending on the model you purchase.
Does this product ever need recalibration?
The finger pulse oximeter does not need any calibration. However, if you have any issues with the device, please do not hesitate to contact us at cs@beyondmedshop.com. We will be more than happy to further assist.
Can I use your Zacurate pulse oximeter during sleep?
The pulse oximeter does not have a memory function and does not save your last reading. It will give you a reading as long as you have your finger inside the finger chamber. Once you take your finger out, the pulse oximeter will turn off after 10 seconds. Since it does not record data it is not meant to be used overnight or during sleep.
Does the pulse oximeter take a reading on pets/animals?
Please note that this pulse oximeter is developed specifically for human beings and may not be suitable for an animal or pet. Please consult with your vet who will be able to suggest a more suitable device for animals.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>