Hanwha Vision SLA-T4680VA Network Camera User Guide
- June 15, 2024
- Hanwha Vision
Table of Contents
NETWORK CAMERA
Quick Guide
SLA-T1080FA/T2480A/T2480VA/T4680A/T4680VA
SLA-T4680VA Network Camera
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth.
(Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil constituents as they may deform or cause damage to the product.) -
Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/ accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
Unplug this apparatus during lighting storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
This Lens module has to be connected with equipment, which supplied by a power supply unit marked “Class 2” or “LPS”.
Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. This device complies with part 15
of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
COMPONENT
As for each sales country, accessories are not the same.
- SLA-T1080FA
- SLA-T2480A
- SLA-T4680A
- SLA-T2480VA
- SLA-T4680VA
INSTALLATION
| |
---|---|---
| |
| |
CONNECT LENS MODULE CABLE TO LENS MODULE
| 
---|---
ADJUST THE LENGTH OF THE CABLE FOR CONNECTING THE LENS MODULE
| 
---|---
Number| Color
---|---
1| Black
2| Red
3| Bule
4| Orange
5| White
6| Green
Hanwha Vision cares for the environment at all product manufacturing stages,
and is taking measures to provide customers with more environmentally friendly
products.
The Eco mark represents Hanwha Vision’s devotion to creating environmentally
friendly products, and indicates that the product satisfies the EU RoHS
Directive.
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of
waste and recycle them responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other
commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate
battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries
in this product should not be disposed of with other household waste at the
end of their working life. Where marked, the chemical symbols Hg, Cd or Pb
indicate that the battery contains mercury, cadmium or lead above the
reference levels in EC Directive 2006/66. If batteries are not properly
disposed of, these substances can cause harm to human health or the
environment.
To protect natural resources and to promote material reuse, please separate
batteries from other types of waste and recycle them through your local, free
battery return system.
Türkiye Distributor
EDS Electronic Support Industry and Trade Ltd. Ltd.
Majlis Mah. Teraziler Cad. Fan Sk. (Old one is Kılıç Sk.) No: 4 Sancaktepe /
Istanbul / Türkiye
Tel +90.216.313.25.15 Fax +90.216.528.45.98
Koyuncu Electronic Information Technology Systems Industry. and External.
Tic. Inc.
Emek Mah. Ordu Cad. No:18 Sancaktepe / Istanbul / Türkiye
Tel +90.216.528.88.88 Fax +90.216.313.18.18
NFS Technology and Automation Systems Industry. And Trade. Ltd. Sty.
Cumhuriyet Mah Şair M.Akif Ersoy Sk. No:36 Üsküdar / Istanbul / Türkiye
Tel +90.216.505.82.28 Fax +90.216.505.82.29
Sensonet Technology Elect. and Cognition. Speed. Singing. and Tic. Ltd.
Ltd.
Ramazanoğlu Mah. Transtek Cad. No: 2 Pendik / Istanbul / Türkiye
Tel +90.216.999.49.49 Fax +90.212.381.61.02
ENTES ELECTRONIC DEVICES MANUFACTURING AND TRADE. Inc.
Dudullu Org.San.Reg. 1st Street No:23 34776 Ümraniye – Istanbul / Türkiye
Tel +90.216.313.01.10 Fax +90.216.314.16.15
Average life of the device recommended by the Ministry of Commerce
Similar declaration that the device complies with EEE regulations
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>