estelle ESMOITECGPA Moisture Protect Hair Dryer User Guide
- June 15, 2024
- ESTELLE
Table of Contents
estelle ESMOITECGPA Moisture Protect Hair Dryer
Product Information
Specifications
- Power : 1600W
- Power supply : 220-240V ~ 50-60Hz
Safety & Warnings
WARNING : To avoid accidental injuries such as electric shock and fire caused by improper use, be sure to observe the following safety precautions!
- Read all instructions in this guide before using this product.
- Retain this guide for future reference.
- Do not skip, substitute, or modify any steps or procedures in this guide, as doing so could result in personal injury or product damage.
- Do not use this device in a bathtub, shower, or water-filled reservoir.
- Do not operate it with wet hands.
Overview
- Dryer
- Concentrator
- Diffuser (as optional)
- Magnetic ring
- Ion generator
- Air outlet
- Cool shot button
- On-off button
- Detachable filter air inlet filter
- Speed indicator
- Temperature indicator
- Speed control button
- Temperature control button
Operation
Plug the appliance into the electrical supply. Make sure it is set at the
OFF position.
Turning the Hair Dryer On/Off
To turn on/off the hair dryer
- Make sure the appliance is plugged in.
- Set the on-off button to the desired position.
Attaching/Removing Accessories
Note: To avoid burns, do not adjust or remove the accessories during
operation. Allow the accessories to cool down before handling.
To attach/remove accessories
- For attachment, align the accessory with the corresponding slot on the dryer and push it in until it clicks into place.
- For removal, gently pull the accessory out of the slot.
Airflow Control
Select the desired temperature (4 levels, including 1 cool) and power (3
levels) using the speed selection and temperature selection buttons. When the
temperature level is set to 1 of the 3 heated levels, press the cold shot
button to quickly switch to cool air. This hair dryer features 12 different
styling options (3 air speeds x 4 temperatures).
| Temperature | Air Speed |
|---|---|
| Cool | Low |
| Warm | Medium |
| Hot | High |
| Quick Dry | |
| Cold Shot |
The Cool Shot feature of the hair dryer releases a stream of cool air. It is recommended to use this function at the end of your drying session to set your hairstyle and achieve a shiny finish.
- Press the cold shot button to instantly switch to cold air.
- Press the cold shot button again to resume at the previously set temperature.
Ionic Function
To activate the ionic function
- Slide the power switch upward to turn the hair dryer on.
This will initiate the generation of negative ions in the air, enhancing the dispersion of water molecules. As a result, it will effectively reduce frizz and provide you with a more efficient drying experience. Direct the airflow to the specific area of your hair that you want to target.
Shutdown Procedure
Once you have finished using the appliance
- Set the air flow control button to the 0 position.
- Unplug the appliance from the electrical outlet.
Cleaning & Care
This marking indicates that this appliance should not be disposed with other
household wastes. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources.
FAQ
Q: Where can I find more information and assistance?
A: For the most up-to-date guide for your product, as well as any
additional assistance you may require, head online to
help.kogan.com.
SAFETY & WARNINGS
WARNING: To avoid accidental injuries such as electric shock and fire caused by improper use, be sure to observe the following safety precautions!
Read all instructions in this guide before using this product. Retain this guide for future reference. Do not skip, substitute or modify any steps or procedures in this guide, as doing so could result in personal injury or product damage.
- This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product in a safe way by the person responsible for their safety, and understand the hazards involved.
- Children should be supervised to ensure that they do not play with the appliance.
- If the power cord is damaged, cease use immediately and contact help.Kogan.com for support.
- Do not use this device in a bathtub, shower, or water-filled reservoir
- WARNING : Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
- The appliance must be fixed so that the hand-held part, when fully extended, is out of reach of persons taking a bath or shower.
- When using this appliance in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
- For additional protection, the installation of a residual current device (RCD) having a rated residual operation current not exceeding 30mA is advisable in the electrical circuit supplying the bathroom. Consult a licenced trade professional for advice.
- Do not block the air inlet or place the air inlet facing down during operation. Doing so may cause the heating wire to overheat and ignite.
- Do not immerse the hair dryer in water or any other liquids.
- Do not use the hair dryer in a humid environments.
- To avoid potential damage and electric shock, do not expose the hair dryer to water or operate it with wet hands.
- To prevent the risk of fire or explosion from a short circuit, avoid using the hair dryer near any flammable substances such as petrol, paint, thinners, spray, etc.
- Avoid wrapping the power cord around the main body of the product, as this can lead to the power cord breaking, and increase the risk of electric shock or fire due to a short circuit.
- Avoid storing the product in a highly humid environment to prevent the risk of electric shock or fire due to a short circuit.
- Keep the product out of the reach of children and infants.
- Do not attempt to repair, disassemble, or modify the product on your own, as this can lead to injury due to improper operation or fire hazards.
- During use, the air outlet and nozzle may become hot, do not touch it with your hands or it may cause burns.
- This product is not suitable for infants or young children.
- Always unplug the hair dryer from the outlet after using it.
- Do not unplug by hair dryer by pulling on the power cord, instead grasp the plug.
- Avoid forcefully pulling the power cord to prevent it from breaking, causing electric shock or fire due to short circuit.
- Use the hair dryer solely for its intended purpose of drying hair. Do not use it to dry shoes or articles of clothing.
- Ensure to use the hair dryer only with an electrical outlet that is compatible with its power rating of 220-240V~.
- Do not use universal plugs or voltage converters to avoid potential dangers.
- When storing the hair dryer, avoid wrapping the power cord around the main body of the product to prevent damaging the power cord, which can cause electric shock or fire due to a short circuit.
- If this product or its power cord shows any signs of damage cease use immediately and contact help.Kogan.com for support.
OVERVIEW
- Dryer
- Concentrator
- Diffuser (as optional)
- Magnetic ring
- Ion generator
- Air outlet
- Cool shot button
- On-off button
- Detachable filter air inlet filter
- Speed indicator
- Temperature indicator
- Speed control button
- Temperature control button
OPERATION
Plug the appliance to the electrical supply. Make sure it is set at the “OFF” position.
Turning the Hair Dryer On/Off
- Slide the power switch up to turn the hair dryer ON.
- Slide the power switch down to turn the hair dryer OFF.
Attaching/Removing Accessories
- This product is equipped with a magnetic accessories for easy attachment and removal.
- The accessories can be rotated 360°.
- Ensure the hair dryer is off when attaching or removing accessories.
Note : To avoid burns, do not adjust or remove the accessories during operation. Allow the accessories to cool down before handling.
Airflow Control
- Each time the Airflow Control Button is pressed, the hair dryer cycles through the three airflow levels (1 à 2 à 3 à2à 1).
- Upon restarting, the hair dryer will automatically resume its airflow level from the previous use.
- Select the desired temperature (4 levels, including 1 cool) and power (3 levels) using the speed selection and temperature selection buttons. When the temperature level is set to 1 of the 3 heated levels,
- press the cold shot button to quickly switch to cool air.
- This hair dryer feature 12 different styling options (3 air speeds x 4 temperatures).
| Temperature | Cool | Warm | Hot | Quick Dry |
|---|---|---|---|---|
| Air Speed | Low | Medium | High |
Cold Shot
The Cool Shot feature of the hair dryer releases a stream of cool air. It is
recommended to use this function at the end of your drying session to set your
hairstyle and achieve a shiny finish.
- Press the cold shot button to instantly switch to cold air.
- Press the cold shot button again to resume at the previously set temperature.
Ionic Function
To activate the ionic function, simply slide the power switch upward to turn
the hair dryer on. This will initiate the generation of negative ions in the
air, enhancing the dispersion of water molecules. As a result, it will
effectively reduce frizz and provide you with a more efficient drying
experience. Direct the airflow to the specific area of your hair that you want
to target.
Shutdown Procedure
Once you have finished using the appliance, set the air flow control button to
the 0 position and unplug the appliance from the electrical outlet.
Notes
- The appliance may stay hot even after its use. Wait until it cools down completely before handling or storing it.
- The hair dryer will automatically shut down after 10 minutes of operation. If you still need to use it, slide the switch to ON again.
CLEANING & CARE
- Before cleaning, ensure that the power switch is turned off and hair dryer has been unplugged from the electrical outlet.
- Do not use any corrosive liquids such as alcohol, nail polish remover or detergent to clean this product. Doing so may damage this product or cause malfunction.
Cleaning the Filter
- Remove the filter cover by pulling it downwards.
- Use a dry lint-free cloth, cotton swab or soft brush to remove any dust, hair or debris from the filter cover and the stainless-steel mesh filter.
- Do not press or rub the stainless-steel air inlet filter with fingernails or sharp objects.
- After cleaning, install the filter cover back to its original position.
- Clean the filter at least once a month.
- Do not operate the hair dryer with the filter cover removed.
This marking indicates that this appliance should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
SPECIFICATIONS
- Power 1600W
- Power supply 220-240V ~ 50-60Hz
Need more information?
-
We hope that this user guide has given you the assistance needed for a simple set-up.
-
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>