BOULT K35 TWS Earbuds User Manual
- June 15, 2024
- BOULT
Table of Contents
K35
User Manual
Know your K35
What’s in the box ?
Charging Case
Earbuds
Type C Charging Cable
Extra pair of ear tips
Warranty Card
Product specification
Product Name — TWS Bluetooth Headset
Model —- Boult Audio AirBass
Bluetooth Range – ~10m/33ft (without any obstacles)
Earbuds Charging Time — 45 mins
Frequency Range – 20Hz – 20KHz
Technology – HFP/HSP/A2Dp/AVRCP
Input – DC5V =1A
How to use your K35 ?
Touch Controls
The Touch Area (Multi-Functional Touch Panel) is located in the upper part
of the earbuds handle.
Wearing Earbuds
The earbud marked with L is worn on the left ear and the earbud marked with R
is worn on the right ear
Power ON/OFF:
Power ON: Auto: Open the charging case and take out the earbuds to Power ON.
Manually: Tap and hold the multifunction button (MFB) for 3 seconds.
Power OFF: Auto: Place both the earbuds in the charging case, close the lid
Play/Pause
Tap the MFB once| Previous Track
Double Tap the left MFB
---|---
Next Track
Double Tap the right MFB| Voice Assistant
Long Press the MFB for 2s
Volume +
Triple Tap the right MFB| Volume –
Triple Tap the left MFB
Answer the Call
Tap the MFB once| End Call/Reject
Double Tap the MFB
| Game/Music Mode
Tap the MFB four times
Pairing
Open the charging case, and take out the earbuds, the earbuds LEDs will start
flashing automatically until paired with a device.
Activate Bluetooth on the device, turn on Bluetooth, search for pairing name
“Boult Audio Airbass” and click on it.
Single Mode: When on dual mode, put one earbud into the charging case. Only
take one earbud out of the charging case and connect it.
Bluetooth Lost: Turn off mobile phone’s Bluetooth, earbuds will enter pairing
mode and can pair with other devices.
If the connection range is exceeded, the earbuds will enter the back
connection mode. No connection within 5 minutes, the earbuds will turn off.
Reset
If your earbuds fail to pair, or only one works, reset them.
Delete all “Boult Audio Airbass” Bluetooth records on the phone and turn off
Bluetooth.
Put earbuds in the charging case and then take out to pairing modes, tap L&R 5
times simultaneously, hear “DU” prompt voice to clear all pairing.
Put earbuds back into the charging case.
Voice Prompts
You will hear ‘power on” when the headset powers on.
You will hear ‘power off’ when the headset powers off.
You will hear ‘connected’ when the headset is paired.
You will hear ‘low battery’ when the headset is in low power status
You will hear gaming mode when headset is in Gaming mode
Maintenance Instructions
Warranty is valid/invalid only basis of the below criteria:
The product should be purchased through legal and formal channels to be
applicable for warranty.
Damaging the product intentionally/unintentionally, or due to natural
disasters, etc. is not covered in the warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>