8BitDo Zero 2 Bluetooth Game Pad Instruction Manual

8BitDo Zero 2 Bluetooth Game Pad

ON/OFF

• press start to turn on the controller
• press & hold start for 3 seconds to turn off the controller
• press & hold start for 8 seconds to force turn off the controller

USING INSTRUCTION

• Switch

1. press Y & start to turn on the controller. Blue LED blinks 4 times per cycle
2. press select button for 3 seconds to enter its pairing mode. LED starts to rapidly blink
3. go to your Switch Home Page to click on Controllers, then click on Change Grip/Order. Blue LED becomes solid when connection is successful
4. controller will auto reconnect to your Switch with the press of start once it has been paired  

when connected to your Switch, select + Dpad_Down = Switch HOME button, select

• start = Switch ZL +ZR button

  • Windows (X – input)
  1. press X & start to turn on the controller. Blue LED blinks twice per cycle
  2. press select button for 3 seconds to enter its pairing mode. LED starts to rapidly blink
  3. go to your Windows device’s Bluetooth setting, pair with [8BitDo Zero 2 gamepad]. Blue LED becomes solid when connection is successful
  4. controller will auto reconnect to your Windows device with the press of start once it has been paired
     when connected to your Windows, select + Dpad _Down = HOME button
  • Android
  1. press B & start to turn on the controller. Blue LED blinks once per cycle
  2. Press select button for 3 seconds to enter its pairing mode. LED starts to rapidly blink
  3. go to your Android device’s Bluetooth setting, pair with [8BitDo Zero 2 gamepadi. Blue LED becomes solid when connection is successful
  4. controller will auto reconnect to your Android device with the press of start once it has been paired
  • macOS
  1. press A & start to turn on the controller. Blue LED blinks 3 times per cycle
  2. press select button for 3 seconds to enter its pairing mode. LED starts to rapidly blink
  3. go to your macOS device’s Bluetooth setting, pair with [Wireless Controller]. Blue LED becomes solid when connection is successful
  4. controller will auto reconnect to your macOS device with the press of start once it has been paired
  • Keyboard mode
  1. press R & start to turn on the controller. Blue LED blinks 5 time per cycle
  2. press select button for 3 seconds to enter its pairing mode. LED starts to rapidly blink
  3. go to your device’s Bluetooth setting, pair with [8BitDo Zero 2 gamepad]. Blue LED becomes solid when connection is successful
  4. controller will auto reconnect to your device with the press of start once it has been paired
     on keyboard mode, please make sure the input language on your device is in English

Battery

status

• low battery mode red LED blinks
• battery charging red LED stays solid
• battery fully charged red LED turns off
  • built-in 180 mAh Li-ion with 8 hours of play time
  • rechargeable via USB cable with 1 – 2 hour charging time

Power saving

• sleep mode – 15 minutes with no use
• press start button to wake up the controller

Support

please visit support.8bitdo.com for further information & additional support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>