make it real 1211-INSNRD-01 Gemstone Jewelry Instruction Manual

1211-INSNRD-01 Gemstone Jewelry
Instruction Manual

1211-INSNRD-01 Gemstone Jewelry

INSTRUCTIONS

WHAT’S INSIDE

1 gem pendant

1link charm

1 star charm

49 assorted beads

1 clear elastic cord 0.5m

1 large faceted bead

3 colors of nylon cord 2.4m total (2.6 yds)

1 necklace cord

1Playlray

1jump ring

You will need

LEGEND

NECKLACE

1. Slide the gem pendant and the star charm onto the necklace cord.
2. Take the jump ring and pull each end to open it slightly with your fingers (no tools needed).Attach it to the end of the necklace cord. Press the jump ring to close it afterwards.
3. You are finished!

BRACELET 1

1. Fold the purple cord in half and cut it in two.
2. Add a drop of glue to each end of the cord. Wait 5 minutes to let it dry.
3. Thread the beads as shown onto the blue cord and center them.
4. Place a piece of adhesive tape on the cord at one end of the beaded area to secure them.
5. Attach one purple cord with a simple knot centered around the other end of the beaded area.
6. Start braiding the cords for a length of 13 cm (5 ⅛ in).
7. Make a small loose knot to hold the braid in place.
8. Repeat steps 5–7 with the other side.
9. Thread a big silver bead onto the braid to create an adjustable tie. Pass the other braided section through the silver bead in the opposite direction.
10. Thread a big silver bead onto each braided end. Make a simple knot with the cords on each end.
11. Add a drop of glue on each end. Wait 5 minutes to let it dry.
12. Cut the excess cords after the knots.
13. Great job! You have made a beautiful bracelet!

BRACELET 2

1. Measure and cut the pink cord into 3 equal lengths of 30 cm (11 ¾in) each.
2. Add a drop of glue at each end of the cords. Wait 5 minutes to let it dry.
3. Fold a pink cord in half and pass the folded edge through the charm’s loop.
4. Pass the ends of the cord through the loop to create a knot.
5. Thread a purple bead through both cords and secure it with a simple knot.
6. Thread a pink bead onto each cord end and secure each one with a simple knot.
7. Cut off the excess cords after the knots.
8. Repeat steps 3-7 for the other side of the bracelet.
9. Cross the pink cords as shown to start making a sliding knot. Using the remaining pink cord, tie a knot around the center where the other pink cords cross.
10. Attach the bracelet onto the Play Tray.
11. Make 10 square knots. Be careful not to make them too tight, so that they can slide on the cords.
12. Secure the end with 2 simple knots.
13. Add a drop of glue to each end of the knots only. Wait 5 minutes to let it dry.
14. Cut off the excess cords after the knot.

BRACELET 3

1. Attach the elastic cord to your work space with a piece of adhesive tape. Thread the beads onto the cord following the pattern shown.
2. Make a jeweler’s know
3. Add a drop of craft glue or clear nail polish onto the knot. Wait 5 minutes for it to dry.
4. Cut off the excess cords after the knot.

WARNING!
CHOKING HAZARD — small parts. Nol suitable tor children under 3 years.
STRANGULATION HAZARD — Keep away from young children.

EU Responsible Person (Cosmetics):

MAKE IT REAL
1700 Reisterstown Rd Ste 211
Pikesville MD 21208 USA 410-995-8685
Jaclyn House, 24 Hood Street
An coats, Manchester, M4 6WX UK
+44 (0) 1613024100
0 2022 MAKE IT REAL, LLC
Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>