SKY TOPPOWER HD937D Digital Display Temperature Control Instructions
- June 15, 2024
- SKY TOPPOWER
Table of Contents
Digital Display Temperature Control Anti
-static Advanced Soldering Station
HD937D
User Manual
Warn
When the power is turned on, the temperature of the soldering iron tip can be
as high as 480°C.Before using the welding station, please follow the relevant
rules.
To avoid electric shock or fire or damage to life.
In view of possible burns or fire from abuse, please strictly observe the following.
- Do not touch the metal parts near the soldering iron tip of this product.
- Do not use this product near inflammable and explosive objects.
- Notify other workers in the workplace that the tip of the soldering iron is extremely hot, which may cause a dangerous accident, and the power should be turned off when resting or after use.
- When replacing parts or soldering iron tips, turn off the power first and wait for the soldering iron tips to cool down to room temperature before proceeding.
To avoid damage to the welding station and safe working environment, observe the following:
- Do not use this product for operations other than soldering.
- Do not knock the handle of the soldering iron on the worktable to remove the residual tin, which will damage the heating core.
- Do not modify the power cord and parts of this product without authorization.
- Do not operate the product with a warm electric soldering station or wet hands.
- During welding, smoke will be generated. Users should take corresponding protective measures and use it in a well-ventilated environment.
- When using this product, do not do anything that may hurt the body or damage objects.
Product Overview
-
Technical Parameter
Power consumption: 60W
The output voltage: 24V AC
Temperature accuracy：±10℃
Temperature stability：±5℃(Still air, no load)
Input voltage:110VAC±10% 60Hz
Temperature range:200~480℃
Tip-to-ground impedance：<2Ω -
How to use
A. Check before power-on: Check the power supply voltage at the rear of the product and make sure that the input power meets the specifications.
B. After power-on: turn on the power switch, the LED digital tube displays the temperature unit symbol “–C” or “–F” for one second, and then displays the set temperature for three seconds, and then displays the actual temperature value of the soldering iron.
C. Temperature setting: When the temperature needs to be adjusted, turn the temperature knob to set the temperature. The LED digital tube displays the set temperature, and after three seconds, the LED digital tube displays the actual temperature of the soldering iron tip.
D. Temperature correction: When replacing the heating core or the soldering iron head and need to calibrate the temperature, you can use a screwdriver with a “-” head to align the “CAL” position hole on the panel, and then fine- tune the potentiometer inside to perform temperature calibration.
E. Temperature locking and unlocking: When the temperature needs to be locked in certain situations, please use a screwdriver to tighten the screw of the temperature setting knob clockwise until the temperature setting knob does not move. Screw the setting knob until the temperature setting knob can set the temperature.
F. Temperature unit conversion: Turn the temperature potentiometer to the maximum in status, turn on the power switch, when the LED displays the temperature unit, quickly turn the potentiometer to the lowest end to convert the temperature unit.
G. Fault display: When the LED displays “S-E”, please check whether the handle wire is correctly connected or the heating core sensor is damaged. When the LED displays “H-E”, it means that the heating core is damaged and the temperature cannot be controlled normally.
H. Maintenance before shutdown: Before shutdown, please add an appropriate amount of tin to the tin surface of the soldering iron tip, adjust the temperature setting knob to the minimum value, and finally turn off the power switch on the host. -
Packing List
| welding station | 1 pcs |
|---|---|
| Soldering iron handle | 1 pcs |
| Soldering iron holder (including cleaning sponge) | 1 pcs |
| user’s manual | 1 pcs |
Model diagram of soldering iron tip used in electric welding station
Tel:00 86 755-23047771
Skype: live: skytoppower_2
E-mail: [email protected]
Adress: 3F, Building A2, Baicai Industrial Park, 19 Tianbao
Road,Shiyan,Shenzhen
Web: www.skytoppower.com
MADE IN CHINA
Documents / Resources
| SKY
TOPPOWER HD937D Digital Display Temperature
Control
[pdf] Instructions
HD937D Digital Display Temperature Control, HD937D, Digital Display
Temperature Control, Display Temperature Control, Temperature Control, Control
---|---