BOULT Dive X 2.0 Inch Screen 1000 Nits High Brightness Display User Manual
- June 15, 2024
- BOULT
Table of Contents
BOULT Dive X 2.0 Inch Screen 1000 Nits High Brightness Display
Please read the instructions before use
The company reserves the right to modify the contents of this manual without notice. According to normal circumstances some functions are different in a specific software version.
The product should be charged for more than 2 hours before use but avoid prolonged charging.
Please attach the magnetic charging cable to the charging port of the watch correctly for charging.
Please use a: 5V/1A or 5V/2A rotted charger, with the original charging cable provided In the box.
Before using the product, please download the Soult Fit application to your mobile phone, log in, and enter the required Information.
Car chargers are not recommended for charging your device (the voltage of the car Is unstable when the car ls turned on and turned off).
What’s in the box?
- Boult Dive X smartwatch
- User manual
- Magnetic charging cable
- Warranty card
Product specification
- Product Name – Boult Dive X
- Bluetooth Pairing Name – Boult Watch SA
- Screen Size – 2 inches
- IP Rating – IP67
- Bluetooth Version – 5.2
- Bluetooth Range – 10m
- Sensors – HR, Sp02, Pedometer
How to wear
Please wear the device on your wrist correctly, about one finger from the carpal, and adjust it to a comfortable position.
Tip: Please wear the device a little tighter for accurate functioning of
the heart rate monitor
How to download & connect to ‘Boutin Fit’ App
“Boult Fit” App download method
- For iOS users, the App can be downloaded from the App store.
- For Android users, the App can be downloaded from Google play store.
To use the App, please register and log in according to the interface prompts, and make sure that the Bluetooth and mobile Location Is turned ON.
In the App’s device tab, select the Bluetooth name “Soult Watch SA” for connecting, and the watch can be used normally.
Tips
- For a first-time connection with Android, “Permissions” reminder will pop-up. Please follow the guidance and allow permissions to ensure all functions work properly.
- Mobile phone system of Android 5.0 or iOS 9.0 or above is recommended.
- Please upgrade the pop to the latest version to get a better experience.
- For a first-time connection with an iPhone, “Pair” reminder will pop-up. Click on Pair, for incoming calls and instant messages to be pushed.
- To connect successfully, please turn on the mobile phone ‘s Bluetooth, GPS and mobile network.
- If the device cannot be searched or connected during use, please reset or turn off the watch and try again.
Operating Instructions
(A). Quick settings: Slide down from main page to go to shortcut page.
(B). Notification: slide up from the watch face main page to see the notifications.
(C). Go to menu: Slide from left to right from the watch face main page
to enter the menu list.
(D). Activities Data: Slide from right to left to see the activities
tracker
Function introduction
Phone Calling: Keep a record of your phone calls, add contacts synchronously, and use the watch to make calls. More details can be viewed In the App.
Voice assistant: After successfully connecting the App & Bluetooth functions, the user can utilize the Al voice assistant to run the phone by using the phone’s Woke up” word.
Sleep: Records and displays the total sleep time (deep sleep and light sleep) of the previous night. More detailed Information analysis and data records can be viewed In the App .
TOO+ Sports Mode: Enjoy multiple sports modes like Running, Rock Climbing, Skipping, and many more. More details can be viewed in the App
Heart rate monitoring: Click on the heart rate page to measure heart rate. More App monitor operations and test data can be viewed in the App.
Activity Data: Record the number of steps, distance & calories of the day. More detailed information analysis and data records can be viewed in the App.
Blood Pressure: Measure the current blood pressure. The watch can record and display the pressure value 24 hours a day. More detailed information analysis and data records can be viewed In the App. The values are for reference only and cannot be used for medical purposes.
Blood Oxygen: Record your Blood Oxygen status. The watch can record and display blood oxygen levels 24 hours a day. More detailed information analysis and data records can be viewed In the App. The values are for reference only and cannot be used for medical purposes.
Weather: Displays the current weather status as well as the forecast for the next 3 days. Make sure Bluetooth Is connected.
BT Camera Control: After connecting to the phone, the watch con be used as o remote control for the phone’s camera. Click on the watch camera control page to control the phone camera shutter.
Message: Get message reminders, sync notification push from your phone. It saves 8 latest messages reminders.
Music: Access the Play/Pause/Previous/ Next and volume controls on the phone when connected to the App.
Female cycle: After the watch is connected to the APP, women’s health alerts can be enabled on the APP to view women’s health alerts on the watch
Stopwatch: Let’s you record time easily
Alarm: 8 alarm reminders can be set. The watch will vibrate, and the screen will be bright
Remind to Drink: The device will remind you to drink water at scheduled time intervals. More details can be viewed in app.
Other functions: Find watch, 12/24h time system, sedentary reminder, low battery reminder, incoming call reminder, online dial/custom dial, unit setting, calculator, female menstrual tracking, and raise to wake.
Remind to Move: The device will remind you to move after one hour of resting. More details can be viewed on the app
Other settings: Dial/Menu view/ Brightness/Sound settings/ About/Power, Reset/App Download.
Brightness adjustment: Brightness or darkness can be adjusted.
Power on/off: Press and hold the side button for 5 seconds on the dial page.
Power saving mode: When turned on, the brightness drops to the lowest level, and the Incoming message does not vibrate to remind.
Do not disturb: After turning it on, the watch will no longer receive messages.
Restart: Restart the watch In settings or hold the power button for 3 seconds.
Version: Displays the Bluetooth name and version number.
Reset: Restores factory settings.
Using In wet conditions: Your gadget Is water-resistant, which means It can withstand even the sweatiest workout while remaining splash and rain- proof.
NOTE:
Do not wear your Smart Bracelet when swimming. Additionally, even while
bathing with your wristband won’t harm It, wearing it constantly prevents your
skin from getting enough oxygen. When your bracelet gets wet, properly dry It
before re-putting It on.
|
---|---
Scan & Download ‘Boultflt’ App
Using Quick View: With Quick View, you can view the time or a message from your phone on your smartwatch without taping. Simply turn your wrist in your direction, and the time screen will appear for a brief period of time.
Warranty
- One-year warranty for default hardware defects, charging cable.
- Below reasons for defects are not included in free warranty service:
- Personal assembling or disassembling
- Damage due to dropping the product during use.
- All man-made damages or due to the third party’s fault, Improper use (such as: water In the smartwatch, external force shattering, scratches during use, etc.)
- Please provide the warranty card and contact direct dealers for the warranty service.
- Please note that all the functions of the product are based on physical objects.
Notes:
- To ensure water resistance works right, please DO
NOT:
- Wear the watch while swimming, hot shower, or drop hot tea and other corrosive liquids.
- Remove any screws or buttons.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>