REHUO TOYS ZX-T002 Stunt Remote Control Vehicle Instructions
- June 15, 2024
- REHUO TOYS
Table of Contents
REHUO TOYS ZX-T002 Stunt Remote Control Vehicle
STUNTCARINSTRUCTION
Please read this instruction manual carefully before use,
Packing list
Installation and charging method for the batteries of stunt car and remote control
Connect the car to the charging cable, then plug the USB charging cable into the USB port of the computer or the USB charger.then turn on the power. When the red light on the charging cable goes on, it means that charging is in progress, and when the red light is off it means the battery has been fully charged
Installation method of remote control battery
- opens the battery cover on the backside of the remote control.
- insert 2×1.5v”aa “batteries with the correct direction and cover the battery cover
Remote control function
OPERATION METHOD
- Press the remote control forward and the car will move forward
- Press the remote control backward and the car will move backward
- Press the remote control to the left, the car rotates to the left, 360°rotate + flowering stunt
- Press the remote control to the right and the car will rotate 360°degrees to the right rotate + flowering stunt
- Press the auto demo button. the car demonstrates various actions
- Press the flower demonstration key to demonstrate the flower rotation of the car
CAR AND MAINTENANCE
- If necessary. use a wet towel to gently wipe the car body clean
- Do not expose his toy to milt temperature the Mundy or direct sunlight.
- Do not pour this toy in water to avoid damaging its electronic components.
CAUTIONS
- Pay attention to the direction when installing or replacing batteries
- Do not use non – rechargeable, batteries.
- when charging the rechargeable battery, adult guardianship is required.
- Do not mix old and new batteries or different types of batteries.
- During the operation,please pay attention to the nearby interference signal,otherwise the remote control distance will be affected
- Please replace the battery in the following cases, the battery of the remote control is low. it is unable to charge the truck and the charging indicator becomes or is not turned on
- Please take out the battery in the remote control and take out the battery. put the power switch of the truck to the ‘OFF” position if the truck is not used for a long time
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>