MELCO S100A Low-Noise Network Switch User Guide
- June 9, 2024
- MELCO
Table of Contents
MELCO S100A Low-Noise Network Switch
Warning
This equipment is not waterproof. To prevent fire or electric hazards, do not place any containers filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.
Warning
To prevent fire hazards, do not place any naked flame sources (such as a lighted candle) on or near the equipment.
Warning
This is a class A product. Class A devices are those that are marketed for use in a commercial, industrial or business environment. This product is only intended for professional use, and should not be used in an office or household environment. This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.
Warning
Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazards, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) and never operate the equipment on thick carpeting or a bed.
Caution
This product becomes warm, so be careful not to touch it to avoid hazards.
Operating Environment
Operating environment temperature and humidity: +5°C to +35°C (+41°F to +95°F); less than 80% RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light).
Diagrams
Buttons and Ports
-
Power/Diag LED
On (red): The network switch is starting up. Start up will take about 70 seconds. On (light blue): Power is on. -
DC Power Connector
-
Link/Act LED
On (green): Connection established -
LED Off Switch
Press this switch to turn off the link/act LED. Leaving the link/act LED on may affect the quality of sound. We recommend turning off the link/act LED for typical music playback. -
LAN Ports
Ports 1 and 2 support 100 Mbps full duplex.
Ports 3–8 support 100 Mbps and 1000 Mbps auto negotiation. -
SFP Ports
A network switch will transmit data at 1000 Mbps maximum through these two ports.
Note: LAN port 8 and SFP port 8 is a combo port pair. When devices are connected to both ports at the same time, LAN port 8 will be automatically disabled.
Power On
Available Devices and Ports
Recommended Connections:
Ports 1 and 2*
- Network Audio Player Compatible with 100 Mbps (Renderer, Streamer)
- Melco Digital Music Library as Renderer Ports 3–9
- Music Server, Wireless Router, or Other Network Devices Compatible with 1000 Mbps
- Melco Digital Music Library as Music Server for Network Audio Player**
Specifications
| Standards Compliance | IEEE 802.3ab (1000BASE-T) IEEE 802.3u (100BASE-TX) |
|---|---|
| Data Transfer Rates | LAN Ports 1 and 2: 100 Mbps |
LAN Ports 3–8: 100/1000 Mbps
SFP Ports 8 and 9: Max. 1000 Mbps
Number of LAN Ports| 8
Number of SFP Ports| 2
Compatible Cables| Four-pair category 5e or higher UTP/STP cable
Transmission Distance| Max. 100 m
Connector| RJ-45 8-pin
---|---
Dimensions* (W × H × D)| 215 × 61 × 270 mm;
8.5 × 2.4 × 10.6 in.
Weight| Approx. 2.5 kg; 5.5 lbs
Power Supply| AC Input:
100–240 V, 50/60 Hz (max. 12 W)
DC Input:
12 V, 1 A
Power Consumption (AC Adapter)| Max. DC 12 V, 4 A
Asian Power Devices Inc. DA-48T12-Z067 x **
*Excluding protruding parts
**The “x” at the end of the AC adapter’s model name represents a variable
alphabetic character between D and Z.
Additional Support and Service
If you need help or repair services, please send us an email by referring to
our website below or call the vendor from whom you purchased the product.
You may also refer to our website for firmware update information.
CUSTOMER SUPPORT
https://melco-audio.com/support/
Melco Syncrets Inc.
3-6-8, Yushima, Bunkyo-ku, Tokyo, 113-0034, Japan
https://melco-audio.com/
https://www.facebook.com/melcoaudio/
