hama 00187285 Eco Power 10 Power Pack Instruction Manual

June 15, 2024
Hama

00 187285
“Eco-Power10”
10000mAh
Power Pack
Operating Instructions

hama 00187285 Eco Power 10 Power Pack -

Thank you for choosing aHama product.
Take your time and read the following instructions and information completely.
Please keep theseinstructions in asafeplace forfuturereference.Ifyou sellthe device,pleasepassthese operating instructions on to thenew owner.

Explanation of warning symbols and notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specifichazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

  • “Eco-Power10” Power Pack,10000 mAh
  • 2in1 charging cable
  • These operating instructions

Safety instructions

  • Use the product only for the intended purpose.
  • Protect the product from dirt, moistureand overheatingand use it in dry environments only.
  • Donot use the product in the immediate vicinity of heaters, other heatsources or in direct sunlight.
  • Aswith allelectrical products, this device should be kept out of thereach of children.
  • Donot drop the product and do not expose it to any major shocks.
  • Donot operate the product outside the power limits specified in thetechnical data.
  • Donot open the device or continue to operate it if it becomes damaged.
  • Dispose of packaging material immediately in accordancewith thelocally applicable regulations.
  • The battery is permanently installed and cannot be removed; dispose of the productasawholeinaccordance with thestatutory regulations.
  • Donot modify the product in anyway.Doing so voids thewarranty.
  • Donot use the product in areas in which electronic products are notpermitted.
  • Donot attempt to service or repair the productyourself.Leave any andall service work to qualified experts.
  • Donot incinerate the battery or the product.
  • Donot tamper with or damage/heat/disassemble the batteries/rechargeable batteries.

Operation

4.1. Charging the power pack
Warning –rechargeable battery

  • Do not charge the power pack via yourPCornotebook. The charging currents can damage the USB port on the PC or notebook.
  • Only use suitable charging devicesorUSB connectionstocharge the product.
  • Do not use defective chargers or USB ports and do notattempt to repair them.
  • Do not overcharge the product or allow the battery to completely discharge.
  • Avoid storing, charging and using in extreme temperatures andatextremely low atmospheric pressures (such as at high altitudes).
  • Charge regularly (at least quarterly) during periods of prolonged storage.
  • Start the power pack charging process by connectingthe enclosed 2in1 charging cable to the USB-C input on the power pack(IN 5V/2A) andtoa suitable USB charger. To do this, consult the operating instructions for the USB charger you areusing. Alternatively,the power pack canalso be charged via the micro-USB port (IN 5V/2A).
  • The charging process begins and ends automatically.
  • Fully charge the power pack once beforeusingitfor the first time.

Note -capacity

  • During the power pack charging process, the capacity is displayed constantly.

  • Each status LED corresponds to 25% of the capacity.The permanent illumination of an LED indicates that the capacity hasalready been reached.
    If three LEDs light up and the fourth one flashes, thepower pack is at least 75% charged.

  • If all four status LEDs light up, the fullcapacity is available.

  • Press the button on the power pack to switch this on andtodetermine the power pack’s current capacity.

  • Press the button twice until the status LEDs go outtoswitch the power pack off.

4.2. Charging devices
Warning -Connection of devices

  • Before connecting adevice,check whether it canbeadequately supplied with the power pack’scurrent delivery.
  • Ensure that the total current consumption of the connected device does not exceed 2000 mA.
  • Note the instructions in your device’s operating manual.
  • You must obey the instructions and safety notes contained therein regarding the supply of power to your devices.
  • The power pack must not be charged and dischargedatthe sametime!

Warning

  • Never connect the power pack’s charging cable to its input andoutput simultaneously.This can damage the battery.
  • Donot connect any devicesduring the power pack charging process. Doing so can damage the power pack and connected devices.
  • Connect the enclosed 2in1 charging cable to the power pack’sUSB port (OUT 5V/2A)and the USB-C port on your device (mobile phone, smartphone, etc.).
  • Incertain circumstances, the enclosed charging /connecting cable maynot match the USB port on your device.Inthis case, use theUSB cablethatcame withyour device.
  • The charging process begins automatically.During the charging process, the status LEDs indicate the powerpack’s remaining available capacity.
  • The current battery charge status of your device is indicated on this.
  • Terminate the charging process and switch the power pack off by pressingthe button on the power packtwice. The status LEDs go out.
  • Inthe event that no device is connected, the power pack switches itself off automatically.

Note -optimised charging
Optimised charging means that the power pack recognises the connected device, supplies it with the ideal current strength and thereforereduces the charging time to aminimum. Note that the power pack’s maximum current delivery is 2000mA.

Care and maintenance

Only clean this product with aslightly damp, lint-free cloth and do notuse aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides nowarranty for damage resulting from improper installation/mounting, improper use of theproductorfrom failuretoobserve the operating instructions and/or safety notes.

Technical data

USB-C input 5V 2A
Micro-USB input 5V 2A
USB-Aoutput 1 5V 2A
USB-Aoutput 2 5V 2A
Total output 5V 2A (max.)
Battery type 3.7 V/Li-Po
Min. capacity 9300 mAh /34.41 Wh
Typ. capacity 10000 mAh /37.00 Wh
Usable Capacity* 6400 mAh @ 5V 2A

*The usable capacity is the capacity that can be drawn fromthe output sockets, measured at 5V output voltage and adrawcurrent of 2A.

Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0hama 00187285 Eco Power 10 Power Pack -
icon2Alllistedbrandsare trademarks of thecorresponding companies.
Errors andomissions excepted,and subjecttotechnical changes.
Ourgeneral termsofdeliveryand paymentare applied.
00187285/08.23

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Hama User Manuals

Related Manuals