VEVOR AF5.1 Canopy Tent User Manual
- June 15, 2024
- VEVOR
Table of Contents
VEVOR AF5.1 Canopy Tent User Manual
We continue to be committed to offering tools at competitive prices. “Save Half”, “Half Price”, or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when placing an order with us if you are saving half in comparison with the top major brands.
NEED HELP? CONTACT US! Have product questions? Need technical support? Please
feel free to contact us:
[email protected]
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
CAUTIONS
- Tent support should be selected in a relatively flat area.
- Do not camp too close to the mountain or the river to prevent falling rocks and floods on rainy days.
- Please keep away from fire.
- Do not use it in strong winds, heavy rain, and heavy snow.
- Please use rope, anchor, sandbag, and other accessories during assembly.
- Please be careful not to clip your fingers during installation.
MODEL AND PARAMETERS
TRUCTURE DIAGRAM
- Tarpaulin
- Main frame
- Sandbag
- Height regulator
- Air vent
COMPONENTS
ASSEMBLY
Note: Please install this product with the assistance of 2 people.
-
Place the support in its original state on the ground first.
Pull the lower end of the middle two cross tubes by hand to expand the support to one-third of the state.
-
Put the tarp over the top. Secure the Velcro on the four corners and the stand.
-
Push up the switch at the four corners until the switch card is good.
-
Raise the support to the proper height.
-
Use nails, wind-proof ropes, or sandbags in case of storm or rain.
-
Let the shelter dry before closing.
-
Please fold and store according to the action opposite to the above installation sequence and put it into the bag.
STORAGE AND CLEANING
- Please use mild detergent and water for cleaning.
- Don’t scrub with hard objects like brushes.
- Do not store in a dark, damp place.
- When storing, if the floor nail is stained with soil, it should be cleaned.
Manufacturer: Yuehan Umbrella Manufacturing Co.,Ltd. ADD: Longxi Development
Zone, Taoyuan Town, Heshan, Guangdong, China Made in China
Support and E-Warranty Certificate https://www.vevor.com/support