VORTEX HD65ULTRA Mobile Phone User Guide
- June 15, 2024
- VORTEX
Table of Contents
HD65ULTRA Mobile Phone
User Guide
HD65ULTRA Mobile Phone
PRODUCT HEX
– VISION IMAGE
SPECIFICATIONS
BASIC INFORMATION
Model HD65ULTRA
Operating System Powered by Android™ 13
CPU 4xA53 1.5GHz Mediatek6739
RAM 3GB
ROM 32GB
Battery 4000mAh
Display
Screen Size 6.5″ IPS SCREEN
Resolution 720*1520 Pixeis
Touch Capacitive multi-touch
Cameras
Front Camera 5MP Camera Resolution
Rear Camera 8MP Camera Resolution
Connection(I/O)
Band GSM: 850/900/1800/1900
WCDMA: B2/4/5
LTE: B2/4/5/12/13/25/26/41 (HPUE)/66/71
SIM/TF card 1 Nano SIM Card and 1 TF Card WiFi IEEE802.11 a/b/g/n
Bluetooth Bluetooth 4.0
GNSS GPS
FM YES
Earphone Port 3.5mm
USB Port Type-C USB
Other Features
Video File Format 3GP/MPEG4,etc
Audio File Format WAV/MP3/AAC/AMR/MIDI/APE/WMaA,etc Card
Extend Support TF card up to 64 GB
Language Support Multi-language
Sensor G-Sensor
In the box
1Phone
1USB-C Cable
1Power Adapter
1Quick Start Guide
1Protective case
1Battery
Safety Statement
For body-worn operation, this device has been tested and meets the FCC/ISEDC RF exposure guidelines when used with a leather case. The users must use this leather case. Use of other leather case may not ensure compliance with FCC/ISEDC RF exposure guidelines.
| BE| BG| CZ| DK| DE| EE| IE| EL
---|---|---|---|---|---|---|---|---
ES| FR| HR| IT| CY| LV| LT| LU
HU| MT| NL| AT| PL| PT| RO| SI
SK| FI| SE| NO| IS| LI| CH| TR
FCC Warning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. 15.21 Information
to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Absorption Rate (SAR) information: This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This
device was tested for typical body-worn operations with the back of the device
kept 10mm from the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain a appropriate separation distance
between the user’s body and the back of the device. The use of belt clips,
holsters and similar accessories should not contain metallic components in its
assembly. The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be avoided. Use only
the supplied or an approved antenna.
ANSI C63.19:2011 HAC RF Categories
The ANSI Standard presents performance requirements for acceptable
interoperability of hearing with wireless communications devices. When these
parameters are met, a hearing aid operates acceptably in close proximity to a
wireless communications device.
ANSI C63.19:2011 HAC T-coil Categories
FCC Hearing Aid Compatibility
(HAC)
Regulations for Wireless Devices The U.S. Federal Communications Commission
(FCC) has established requirements for digital wireless mobile devices to be
compatible with hearing aids and other assistive hearing devices. When
individuals employing some assistive hearing devices (hearing aids and
cochlear implants) use wireless mobile devices, they may detect a buzzing,
humming, or whining noise. Some hearing devices are more immune than others to
this interference noise, and mobile devices also vary in the amount of
interference they generate.
The wireless telephone industry has developed a rating system for wireless
mobile devices to assist hearing device users find mobile devices that may be
compatible with their hearing devices. Not all mobile devices have been rated.
Mobile devices that are rated have the rating on their box or a label located
on the box.
The ratings are not guarantees. Results will vary depending on the user’s
hearing device and hearing loss. If your hearing device happens to be
vulnerable to interference, you may not be able to use a rated mobile device
successfully. Trying out the mobile device with your hearing device is the
best way to evaluate it for your personal needs.
In all EU member states. operation of 5150-5250 Ml is restricted to indoor use
only.
Made in China
Documents / Resources
|
VORTEX HD65ULTRA Mobile
Phone
[pdf] User Guide
2ADLJ-HD65ULTRA, 2ADLJHD65ULTRA, HD65ULTRA, HD65ULTRA Mobile Phone, Mobile
Phone, Phone
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>