SIEMENS A5E43491109B Standard Performance Frequency Converter User Manual
- June 15, 2024
- SIEMENS
Table of Contents
SIEMENS A5E43491109B Standard Performance Frequency Converter
Product Information
Specifications
- Edition : 04/2023
- Product: SINAMICS Standard Performance Frequency Converter
- Type : Distributed converter box
- Website : www.siemens.com/drives
Product Usage Instructions
-
Safety Note
The safety note provides important information regarding personal safety and property damage. It contains notices that should be observed to prevent any harm or damage. -
Description
The SINAMICS Standard Performance Frequency Converter is a distributed converter box designed for specific tasks. It is important to understand its features and capabilities. -
Mounting
The mounting process is crucial for proper installation and operation of the frequency converter. Follow the instructions provided in the manual to ensure correct mounting. -
Connection
The connection section provides an overview of the interfaces and explains how to connect the line supply and motor to the converter. -
Overview of the Interfaces
Understand the different interfaces available on the converter box and their functions. This section provides detailed information on each interface and its purpose. -
Connecting the Line Supply and Motor
Follow the step-by-step instructions to properly connect the line supply and motor to the distributed converter box. This ensures safe and efficient operation of the product. -
Diagnostics
The diagnostics section provides information on how to troubleshoot and diagnose any potential issues or errors that may occur during the usage of the frequency converter. -
Equipment Manual
The equipment manual contains additional information and guidelines for operating the SINAMICS Standard Performance Frequency Converter. Refer to this section for any specific instructions or details. -
Technical Specifications
This section provides detailed technical specifications of the frequency converter, including dimensions, circuit diagrams, and other relevant information. -
Dimension Drawings
Refer to the dimension drawings to understand the physical dimensions and layout of the distributed converter box. This helps in planning the installation and ensuring proper fit. -
Circuit Diagrams
The circuit diagrams provide a visual representation of the electrical connections and components within the frequency converter. Use these diagrams as a reference during installation and troubleshooting.
Frequently Asked Questions (FAQ)
-
Q: What should I do if I encounter an error message on the frequency converter?
A: If you encounter an error message, refer to the diagnostics section of the manual for troubleshooting steps. If the issue persists, contact qualified personnel for further assistance. -
Q: Can I operate the SINAMICS Standard Performance Frequency Converter without proper training?
A: No, the product should only be operated by personnel qualified for the specific task. Ensure that you have received appropriate training and have a good understanding of the relevant documentation and safety instructions before using the frequency converter.
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your
personal safety, as well as to prevent damage to property. The notices
referring to your personal safety are highlighted in the manual by a safety
alert symbol, notices referring only to property damage have no safety alert
symbol. These notices shown below are graded according to the degree of
danger.
- DANGER indicates that death or severe personal injury will result if proper precautions are not taken.
- WARNING indicates that death or severe personal injury may result if proper precautions are not taken.
- CAUTION indicates that minor personal injury can result if proper precautions are not taken.
- NOTICE indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified for the specific task in accordance with the relevant
documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are
capable of identifying risks and avoiding potential hazards when working with
these products/systems.
Proper use of Siemens products
Note the following
WARNING
Siemens products may only be used for the applications described in the
catalog and in the relevant technical documentation. If products and
components from other manufacturers are used, these must be recommended or
approved by Siemens. Proper transport, storage, installation, assembly,
commissioning, operation and maintenance are required to ensure that the
products operate safely and without any problems. The permissible ambient
conditions must be complied with. The information in the relevant
documentation must be observed.
Trademarks All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with
the hardware and software described. Since variance cannot be precluded
entirely, we cannot guarantee full consistency. However, the information in
this publication is reviewed regularly and any necessary corrections are
included in subsequent editions.
Safety note
WARNING
Danger to life if the safety instructions and residual risks are not observed
If the safety instructions and residual risks in the associated hardware
documentation are not observed, accidents involving severe injuries or death
can occur.
- Observe the safety instructions given in the hardware documentation.
- Consider the residual risks for the risk evaluation.
Description
Basic scope of delivery
- The distributed converter box can be ordered with Article No. C-200269683.
- The basic scope of the distributed converter box comprises the following main components:
- Control cabinet for distributed mounting in the plant
- “SINAMICS G120” converter to control a motor
The converter comprises the following components
- CU250S-2 Control Unit, Article No. 6SL3246-0BA22-1FA0
- PM250 Power Module, Article No. 6SL3225-0BE32-2AA0
- Brake rectifier from Murr Elektronik, Article No. 50003
The internal interconnection of the brake rectifier is different in the distributed converter box produced from May 2023, which increases availability by means of an electronic control.
Scope of delivery of the PROFINET interface
When ordering the distributed converter box from the factory, specify the
PROFINET interface variant and the fiber-optic cable type.
The following variants are available:
- Variant 1
- “Fiber-optic cable connection“ (POF or glass optical fiber) with the following components in the basic scope of delivery:
- “SCALANCE XF-200IRT managed” switch, Article No. 6GK5204-2AA00-2BD2
- “BA 2xRJ45” bus adapter, Article No. 6ES7193-6AR00-0AA0
- In addition, to connect the fiber-optic cable, a bus adapter is required as media converter depending on the specific fiber-optic cable used:
- Variant 1.1: POF (plastic) or HCS fiber-optic cable
- BA 2xSCRJ bus adapter, Article No. 6ES7193-6AP00-0AA0 Variant 1.2: Multimode glass fiber-optic cable
- BA 2xLC bus adapter, Article No. 6ES7193-6AG00-0AA0
- Variant 2
- “Copper connection”
- When connecting a copper PROFINET cable, neither switch nor bus adapter is required. The PROFINET cable is directly connected to the PROFINET interface of the converter.
More information
You can find more information about the components of the distributed
converter box on the Internet:
- CU250S-2 operating instructions (https://support.industry.siemens.com/cs/ww/en/view/109782994)
- Hardware installation manual for PM250 Power Modules (https://support.industry.siemens.com/cs/ww/en/view/109482010)
- Scalance X202-2P IRT (https://support.industry.siemens.com/cs/en/en/view/102051962)
- Murr Elektronik Brake rectifier (https://shop.murrelektronik.com/Elektronik-im-Schaltschrank/Aktive-Interfacetechnik/Bremsgleichrichter/Aktiver-Bremsgleichrichter-50003.html?listtype=search&searchparam=50003&src=search&srchPage=1&perPage=10&pos=1)
Mounting
Mounting options
The distributed inverter box is available in two mounting versions
.
References
- SIOS
- SIOS
- SIOS
- SIOS
- SIOS
- Elektronik im Schaltschrank Murrelektronik Shop
- Aktiver Bremsgleichrichter Murrelektronik Shop
- SIOS
- SIOS
- SIOS
- SIOS
- SIOS
- SIOS