VEVOR LT4-77 Electric Ceramic Hob User Manual
- June 15, 2024
- VEVOR
Table of Contents
VEVOR LT4-77 Electric Ceramic Hob
Specifications
- Model : LT4-77
- Voltage/Frequency : 220-240V / 60Hz
- Power (total) : 6000W
- Control mode : Touch
- Built-in size: 560×490 mm
- Product size: 590×520 mm
Product Usage Instructions
Important Safety Instructions
Please read all manual instructions carefully before operating the electric
ceramic hob. VEVOR reserves the right to interpret the user manual. The
appearance of the product may vary from the images provided. Please note that
we won’t inform you of any technology or software updates on our product.
Installation
- Cut a hole in the worktop according to the dimensions shown in the diagram below. Leave a minimum of 50mm space around the hole. The worktop should be at least 30mm thick and made of heat-resistant material.
- Ensure proper ventilation for the ceramic hob. The air intake and exit should not be blocked. Install the hob correctly as shown in Figure 2.
WARNING:
- The ceramic plate gets hot during cooking, so please avoid touching it.
- The gap between the hob and any cupboard above it should be at least 760mm for safety.
- The hob must be installed by a qualified person. Do not attempt to install it yourself.
- Do not install the hob above refrigerators, freezers, dishwashers, or tumble dryers.
- Ensure that the wall and the area above the hob can withstand heat.
Connection to Power Supply
If the cable is damaged or needs replacing, it should be done by an after-
sales technician using the proper tools to avoid accidents. The installer must
ensure that the correct electrical connection is made and complies with safety
regulations. The cable must not be bent or compressed and should be checked
regularly by a qualified person.
Operating the Device
To operate the electric ceramic hob, follow these steps:
- Select the desired cooking gear.
- The hob should start heating within 2 minutes. If there is no heating, an E4 fault will be displayed.
- If you encounter any issues or faults, please contact our Customer Service by email at CustomerService@vevor.com. Provide relevant videos, pictures, and your Amazon order number for assistance.
FAQ
What should I do if the ceramic plate gets hot?
After cooking, please do not touch the ceramic plate as it can be hot.
Allow it to cool down before cleaning or touching.
Can I install the hob myself?
No, the hob must be installed by a qualified person. Please do not attempt
to install it yourself.
What should I do if the hob is not heating?
If there is no heating within 2 minutes after selecting the cooking gear,
an E4 fault will be displayed. Please contact our Customer Service by email at
CustomerService@vevor.com for assistance.
We continue to be committed to providing you tools with at a competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands.
MODEL: LT4-77
NEED HELP?
CONTACT US!
Please feel free to contact us: at
CustomerService@vevor.com
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
MODEL AND PARAMETERS
| Model | LT4-77 |
|---|---|
| Voltage/Frequency | 220-240V / 60Hz |
| Power (total) | 6000W |
| Control mode | Touch |
| Built-in size | 560×490 mm |
| Product size | 590×520 mm |
Notice : the ceramic plate is hot after cooking, please do not touch it!
WARNING
- Repair of any faults in your cooktop must be carried out only by an Authorized Repair Service technician, otherwise, the guarantee is not valid.
- The technical details and identification of the appliance are shown on the specification plate. Consult this plate before proceeding with the electrical connection.
- Electrical connection must be carried out by a certified specialist familiar with official regulations.
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions carefully before using this cooktop. When using kitchen appliances, basic safety precautions must be followed, including the following:
-
This appliance must be properly installed and grounded by a qualified technician. Only connect to a properly grounded outlet. See electric preparation and connection instructions in the Installation Instructions.
-
Type Y attachment: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
-
Do not repair or replace any part of the cooktop unless specifically recommended. Refer service only to an authorized service center.
-
Do not allow children to use this appliance unless closely supervised by an adult
( Note : This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision). -
Do not store flammable materials in or near the cooktop
-
Never use the cooktop to warm or heat a room.
-
For personal safety, wear proper clothing.
-
Use proper pan size. This appliance is equipped with one or more surface units of different sizes. Select pans with flat bottoms large enough to cover the surface unit heating element. The use of undersized pans will expose a portion of the heating element to direct contact and may result in the ignition of clothing. Proper coverage of pots and pans to burner will also improve efficiency.
-
Glazed cooking utensils. Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed pots and pans are suitable for range-top service due to the sudden change in temperature, which may result in breakage.
-
Do not soak removable heating elements. Heating elements should never be immersed in water.
-
Do not cook on a broken cooktop. Contact a qualified technician immediately.
-
Clean the cooktop with caution. Be careful to avoid steam burns if a wet sponge or cloth is used to wipe spills on a hot cooking area. Some cleaners can produce noxious fumes if applied to a hot surface.
SAVE THESE INSTRUCTIONS
INSTALLATION
- Cut a hole in the worktop of the dimension shown in the diagram below A minimum of 50mm space should be left around the hole The worktop should be at least 30mm thick and made of heat-resistant material.
- It is essential that the Radiant Cooktop is well-ventilated and that the air intake and exit are not blocked.
Make sure the cooktop is correctly installed as shown in Figure 2.
For safety, the gap between the hob and any cupboard above it should be at least 760mm.
WARNING
- The Radiant cooktop must be installed by a properly qualified person We have our own qualified installers Never try to install the appliance yourself.
- The Radiant cooktop must not be installed above refrigerators freezers, dishwashers or tumble dryers.
- The wall and the area above the cooktop should be able to withstand heat.
Connection to power supply:
- If the cable is damaged or needs or needs replacing this should be done by an after-sales technician using the proper tools so as to avoid any accidents.
- The installer must ensure that the correct electrical connection has been made and that it complies with safety regulations
- The cable must not be bent or compressed
- The cable must be checked regularly and only replaced by a properly qualified person.
Electric ceramic stove failure:
No heating for 2 minutes after the gear is selected, an “E4” fault will be
displayed. Customer Service Email:
CustomerService@vevor.com (Please send
relevant videos and pictures to our email address, and attach your Amazon
order number. After confirming the problem, we will definitely give you a
satisfactory solution.)
Diagram of the radiant hob
Schematic diagram of the control panel
Instructions for Use
Operating the device
Place suitable cookware onto the cooker plate, The operation of all zones is the same.
Caution! Make no hot pots or pans on the keypad!
Stand-By-Modus
Press the On / Off button. You will hear a beep and see flashing lines on
the display. If you have not selected a program within about 2 minutes, the
unit will return to standby.
Power
- Press the button for the required cooking zone.
- You can slide the to change the power levels of the relevant cooking zone. The operation of zones is the same.
- up to max. 1200 W, up to max. 1800 W.
- up to max. 1800 W, up to max. 1200 W.
- Residual heat indicator
- When the hob has been operating for some time, there will be some residual heat.
- The residual heat indicator warns for each cooking zone separately with the “H” symbol.
Timer
- After you have selected the cooking zone, please press the timer key .
Timer confirmation:
- The default one-place time LED is flashing. With sliding the to set time of the one’s place.
- Press the ****again, and the tens place time the LED is flashing. With sliding the to set time of the tens place. ( Timer max. 99 min.)
- After 5 seconds no number level key be pressed, the time will start timing and the display will indicate the countdown time until to “00”.
- If the two zones have been set at different times, the display will indicate the two setting times one by one.
Timer cancellation：
By pressing onto timer key choose the zone you want to cancel the timer. Then
slide the setting time to “00”, and the timer function will be canceled. Or
you can cancel the two zones timer together by pressing for three seconds.
Key Lock (Childlock)
To ensure the safety of children, the ceramic hob is fitted with an interlock
device.
To lock:
hold down the “Interlock” key for 3 seconds; the hob then goes into
“Interlock” mode, the timer shows “L0” and the rest of the keys are disabled.
To unlock hold down the lock key for 3 seconds and the hob will return to
normal working.
Pause
Touch this button, the hob will stop working, touch again, will be back to the
previous status
SAFETY
Safety systems
- In order to protect the electronics from overheating if the control unit detects excessive heat it will switch off the hotplate closest to the sensors and the letter H will appear on the display. This hotplate can be activated when the temperature of the electronic unit returns to normal.
- Each hotplate is equipped with an interior temperature limiter that switches off the hotplate if the radiant surface is heated excessively. If any cracks appear in the radiant surface, immediately disconnect it from the mains. Do not use any part of the cooktop until a new radiant surface has been fitted.
- AutomaticThe hob will automatically switch off when you did not set cooking time, forgot to switch off the hob, and did not operate the hob for two hours.
USE OF CONTAINERS
- Most stainless steel, enamel, iron, ceramic, and copper pans can be ENAMEL used on radiant cooktops
- Aluminum pans are not recommended as they may stain the surface unless they have stainless steel encapsulated bottoms.
- Hotplates should not be switched on without a pan on top. The base of the pan should be flat and dry. Pans that have been used on gas cookers are not normally completely flat and absorb heat badly.
- Make sure that the diameter of the pan is at least that of the hotplate.
- Avoid dragging pans over the radiant glass surface, as it may get scratched. Always lift the pan.
- Never use tin foil or plastic containers. They may melt and fuse permanently with the radiant glass surface.
CLEANING
IMPORTANT : If the radiant glass surface breaks or you notice cracks in it, disconnect the equipment. Call your Repair Service Technician.
- Clean the radiant glass surface frequently, when it is cool. Never use abrasive products or pads. Clean with a damp cloth and soapy water.
- Once a week, clean thoroughly with specific products that preserve and protect radiant cooktop hobs. Scrape off stuck on stuck dirt with a scraper
- If sugar (or sugary matter) or plastic is accidentally burnt on the cooktop, remove it at once with the scraper while still hot. Otherwise, it may leave a permanent mark.
- Do not use the cooktop as a work surface.
- Be particularly careful with dirt or dust from vegetables, cleaning powders, etc. which may scratch the surface when pans are slid over it.
Support and E-Warranty Certificate https://www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>