Binecer AS-8882 Foot Massager with Heat Instruction Manual
- June 14, 2024
- Binecer
Table of Contents
Binecer AS-8882 Foot Massager with Heat
Thank you very much for purchasing our products and for your support. Please read the instructions carefully before you use this product. After you read it, please keep it properly.
Important Safety Instructions
- It is forbidden for people who are unconscious or sleeping to use this massager.
- Do not use this product for too long at a time.
- Children should be supervised to ensure that they do not play with this product.
- The product has a heating surface, and people who are not sensitive to heat must pay attention when using it.
- Please do not stand up to use this product to avoid injury
- If the power cord is damaged, it must be replaced by a professional from the manufacturer or its repair department to avoid a hazard.
About Products
What’s in the Box
- Foot Massager x 1
- Wireless Remote Control x 1
- User Manual x 1
How To Use
- Lay the foot massage machine flat on the ground, and plug it into the power supply, at this time the display power icon will flash.
- Put your feet or arms on the massaged area before the machine starts, foot massage is recommended to wear thick socks.
- Press the power button in the middle of the control panel to start the product can enjoy a comfortable massage.
- Mode, intensity, temperature, and timing can be selected according to personal preferences.
Suggested Usage Parts
Button Instructions
- Power Button: Press the on/off button to turn on or off the machine.
- Mode Button: 3 modes, mode 7 (Free Mode), mode 2 (Soothing mode), mode 3 (Strong mode)
- Speed Button: 3 kinds of speed: low speed, medium speed, high speed (Note: In mode 2 and mode 3, the speed is not adjustable).
- Heat Button: The default setting is high temperature (7 40 1 ), press once to adjust to low temperature (7131 ), and press again to turn off.
- Time Button: 2 kinds of timers: 15 minutes and 30 minutes. The default mode is 15 minutes timer.
Cleaning
- Please make sure the machine is turned off and unplugged before cleaning.
- Do not immerse the massager directly in water or any other liquid, and keep away from all solvents and harsh cleaning agents such as benzene or thinner.
- Please use a dry cloth to clean the surface of the product.
Storage
- Please store the machine in a box in a safe, cool, dry, and ventilated environment.
- Please do not twist the power cord.
- Avoid scratching the surface of the product with sharp objects and do not place the product in direct sunlight or high temperature.
- Do not hang the product by the power cord.
- If you do not use the product for a long time, please use the cover to prevent dust
Product Specification
- Rated Voltage: 1 00-240V
- Rated Power: 30W
- Rated Frequency: 50Hz-60Hz
- Default Timing: 15 minutes
Warranty
The manufacturer’s warranty is void under the following circumstances but not limited to:
- Improper or inadequate maintenance or modification.
- Accident, misuse, abuse, contamination, or other external causes.
- The use of unspecified adapters and accessories.
- Damages that occurs as a result of one’s failure to follow instructions.
Troubleshooting
Fcc Statement
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. Suppose this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off
and on. In that case, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following three conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Do not use this appliance near water.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>