SharkBite 22223-0000LFA Push To Connect Fittings Instruction Manual
- June 15, 2024
- SharkBite
Table of Contents
SharkBite 22223-0000LFA Push To Connect Fittings Instruction Manual
DESCRIPTION
The SharkBite® Push-To-Connect (PTC) Fittings allow the user to connect pipe in seconds with relative ease.
FEATURES AND BENEFITS
Instant push-fit connection for increased ease-of-use No soldering, clamps, unions, or glue required.
Fittings certified to 200 PSI and 200°F (93°C): Proven durability and quality
Fits copper tubing, and CTS CPVC and PEX Connects all three types in any combination
Integral pipe liner for PEX installations
Integrated design means no loose components, ensures secure, reliable connection
Design certified and agency listed:
Inspector friendly, peace of mind!
Compact, robust Lead Free DZR brass body
Foundation of a strong, corrosion resistant, durable fitting
Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution Quality engineered and manufactured.
Approved to be used underground and behind walls without access panels. Designed for hydronic heating as well as potable water distribution.
SPECIFICATION
The tube shall be inserted into the Sharks ide PTC Fitting in the first stage through a release collar and then through a stainless steel grab ring. The grab ring has teeth that open out and grip onto the tube. At the second stage the tube shall be pushed through an O-ring protector which aligns the pipe. A specially formulated EPDM O-ring shall be compressed between the wall of the fitting and the tube before the end of the tube reaches the tube stop. Only when the pipe has passed through the O-ring and reached the pipe stop shall a secure joint be created The fitting shall be a SharkBite PTC Filling
TYPICAL INSTALLATION
Connecting a joint:
Connecting a joint
Push the pipe and fitting together firmly with a twisting action until it clicks. Allow at least 1″ clearance between fittings for disconnection. (Please consult with local plumbing codes concerning specific water heater piping requirements.)
Disconnecting a joint:
Push the disconnect clip against the release collar and pull the pipe with a
twisting action.
SPECIFICATION DATA
Performance:
Maximum working pressure : 200 psi
Maximum temperature: 200°F (93°C)
Service : Potable water
Materials:
Body: DZR Lead Free Brass
O-ring: EPDM
Grab ring: Stainless steel
Tube support liner : Polysulfide
Finish:
Natural Brass or Chrome Plated
CERTIFICATIONS
The SharkBite PTC Fittings have been designed certified and listed to ASSE 1061, NSF/ANSI 61, NSF/ANSI 14, and NSF/ANSI 372. The SharkBite PTC Fittings are listed by IAPMO and are certified for potable and hydronic heating water distribution (note: Glycol mixture for hydronics is acceptable up to 100% concentration). The SharkBite PTC Fittings have been certified for underground applications and as a manufactured joint without access panels and they meet UPC, IPC and CUPC requirements.
Fitting Size | Insertion Depth |
---|---|
1/4″ | 0.813″ |
3/8″ | 0.875″ |
1/2″ | 0.938″ |
5/8″ | 1.125″ |
3/4″ | 1.125″ |
1″ | 1.313″ |
**Straight Coupling Dimensions
**
P/N | A | B |
---|---|---|
U004LF | 1/4″ | 1.59″ |
U006LF | 3/8″ | 1.84″ |
U008LF | 1/2″ | 2 |
U016LF | 3/4″ | 2.36″ |
UO20LF | 1″ | 2.72″ |
**Connector Dimensions
**
P/N | A | B | C |
---|---|---|---|
U066LF | 1/4″ | 1/2″ FNPT | 1.61″ |
U068LF | 1/2″ | 3/4″ FNPT | 1 75″ |
UO7OLF | 3/8″ | 1/2″ FNPT | 1.73″ |
U072LF | 1/2″ | 1/2″ FNPT | 1.64″ |
U092LF | 3/4– | 1/2″ FNPT | 1.83″ |
U088LF | 3/4″ | 3/4″ FNPT | 1.88″ |
U094LF | 1″ | 1″ FNPT | 2.17″ |
UlIOLF | 1/4″ | 1/2″ MNPT | 1.64″ |
U118LF | 3/8″ | 1/2″ MNPT | 1,77″ |
U120LF | 1/2″ | 1/2″ MNPT | 1.64″ |
U116LF | 1/2″ | 3/4″ MNPT | 1.75″ |
U134LF | 3/4″ | 3/4″ MNPT | 1.89″ |
U138LF | 3/4″ | 1/2″ MNPT | 1.90″ |
U140LF | it | 1″ MNPT | 2.48″ |
U142LF _ | 1.. | ||
_ | 3/4″ MNPT _ | 2.11 “ |
**Straight Stop (Chrome Plated) Dimensions
**
P/N | A | B | C |
---|---|---|---|
23037-0000LF | 1/2″ | Compression | 2.68″ |
**Elbow Dimensions
**
„Mt’. | IdNA „Z T | ,21I | Aisosn d |
---|---|---|---|
nOT Z. I | IdNini ..Z/I 1I | sz/I | noun, |
„SLIT | _UT | wtilre | Illtrtzn |
IIE£61 | ni | III | A109Z11 |
n0tt9.I | _WE a | . | 1195Zfli |
„09c I | _VI | tit | distvzn |
.. 0 E V ‘ I | .8/E | -VI | nun |
1,08tI | .8/E | m8/2 | d–st,:n |
„09T • T | d IIN *VC | 6 betn | 119LZ11 |
„09I Ir | IIrn1 | WI | 41t7titnI |
3 | 9 | V | Nicl |
**Drop Ear Elbow Dimensions
**
P/N | A | B | C |
---|---|---|---|
U249LF | 1/2″ | 1/2″ | 2.20 |
U332LF | 3/8″ | 1/2″ FNPT | 1.83″ |
U334LF | 1/2″ | 1/2″ FNPT | 1.77″ |
U335LF* | 1/2″ | 3/4″ FNPT | 2.00″ |
U340LF | 3/4″ | 3/4″ FNPT | 2.50″ |
Fitting Reducer Dimensions
P/N | A | B | C |
---|---|---|---|
U719LF | 3/8″ | 1/2″ | 2.08″ |
U721LF | 3/8″ | 3/4″ | 2.27″ |
U722LF | 1/2 | 1″ | 3 |
U724LF | 3/4″ | 1″ | 2.25″ |
**Ballcock Connector Dimensions (Chrome Plated)
**
P/N | A | B | C |
---|---|---|---|
U3531LF | 1/4″ | 7/8″ Ballcock | 1.58″ |
**Angle Stop (Chrome Plated) Dimensions
**
P/N | A | B | C |
---|---|---|---|
23036-0000LF | 1/2″ | 3/8″Compression | 2.58″ |
**Reducing Coupling Dimensions
**
P/N | A | B | C |
---|---|---|---|
U009LF | 3/8″ | 1/2″ | 2.00 |
U058LF | 3/4″ | 1/2″ | 2.20 |
U060LF | 1″ | 3/4″ | 2.51 |
**End Stops Dimensions
**
P/N | A | B |
---|---|---|
U512LF | 3/8″ | 1.11″ |
U514LF | 1/2 | 1.08 |
U518LF | 3/4″ | 1.32 |
US20LF | 1″ | 1.52 |
Fitting Adapter Dimensions
P/N | A | B | C |
---|---|---|---|
U766LF | 3/4″ FNPT | 3/4″ | 2.83″ |
U772LF | 1″ FNPT | 1″ | 2.83″ |
*Slip Coupling Dimensions
**
P/N | A | B | C |
---|---|---|---|
U3008LF | 1/2″ | 1.075″ | 4.46″ |
U3016LF | 3/4″ | 1.355″ | 4.42″ |
U3020LF | 1″ | 1.640 | 4.5″ |
- For use with copper & CPVC only
**Faucet Connector Dimensions (Chrome Plated)
**
P/N | A | B | C |
---|---|---|---|
U3525LF | 1/4″ | NPS | 1.58″ |
**Ballcock Elbow (Chrome Plated) Dimensions
**
P/N | A | B | C |
---|---|---|---|
U3537LF | 1/4″ | 7/8″ Ballcock | 1.05″ |
**Tee Dimensions
**
P/N | A | B | C | D |
---|---|---|---|---|
U3S8LF | 1/4″ | 1/4″ | 1/4′ | 2_30″ |
U360LF | 3/8″ | 3/8″ | 3/8– | 2.77″ |
U362LF | 1/2″ | 1/2″ | 1/2– | 2.72′ |
U363LF | 1/2″ | 1/2″ | 3/8– | 2.85– |
U36415 | 3/8″ | 3/8″ | 1/2– | 2.77– |
U370LF | 3/4″ | 3/4″ | 3/W | 3 24– |
U374LF | in | 1″ | 1″ | 3 8C |
U412LF | 3/4″ | 3/4″ | 1/2″ | 3.04″ |
U416LF | 1″ | 1″ | 3/4″ | 3.63″ |
U44415 | 3/4″ | 1/2″ | 3/4′ | 3.08″ |
U454LF | 3/4″ | 1/2″ | 1/2″ _ | 2.92′ |
Disconnect Tongs Dimensions
P/N | Size | A | B | C |
---|---|---|---|---|
U711 | 1/2″ | 0.8 | 1.0 | 4.9 |
U713 | 3/4″ | 0.9 | 1.4 | 5.0 |
U715 | 1″ | 0.8 | 1.6 | 5.1 |
**Disconnect Clip Dimensions
Note: Disconnect Clips sold separately
**
P/N | Size | A | B |
---|---|---|---|
U706 | 1/4″ | 1.19 | 0.3* |
U708 | 3/8* | 1.22 | 0.3 |
U710 | 1/2* | 1.22 | 0.3* |
U712 | 3/4 | 1.72* | 0.4 |
U714 | 1 | 2 | 0.4 |
**Stop Connector Dimensions (Chrome Plated)
**
P/N | A | B | C |
---|---|---|---|
U3523LF | 1/4″ | 1/2″ NPS | 1.58″ |
DESCRIPTION
The SharkBite Ball Valves are high quality forged brass ball valves with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, PEX and PE-RT in seconds with relative ease.
FEATURES AND BENEFITS
Convenient single lever control:
Makes them easy to use and encourages shut-off of water supply.
Full Port Ball Valve
Allows water to flow freely through valve.
Instant push-to-connect connections for increased ease of use No soldering, clamps, unions, or glue required.
Valve assembled to strict quality standards:
Measured thread engagement, measured torque.
SPECIFICATION DATA
Maximum pressure: 200 psi
Maximum temperature: 200°F (water)
Service: Water
Ball Valve Materials:
Body: DZR Lead Free Brass
Seat Ring: PTFE
Ball: Brass, chrome plated
Body End Retainer: Brass
Stem: Brass
EPDM: O-ring
Packing: PTFE
Packing Nut: Brass
Handle: Zinc plated steel
Handle Nut: Zinc plated steel
SharkBite Materials:
Body: DZR Lead Free Brass
O-ring: EPDM
Grab Ring: Stainless steel
Tube support liner: Veradale
Dimensions | A | B |
---|---|---|
1/2″ (22222-0000LF) | 3.06″ | 3.70″ |
3/4″ (22185-0000LF) | 3.62″ | 3.70″ |
” (22223-0000LF) | 4.40″ | 4.66″ |
Dimensions | A | B |
---|---|---|
1/2″ (22182-0000LF) 1/2″ SB X 1/2″ FNTP | 4.75″ | 3.70″ |
3/4″ (22186-0000LF) 3/4″ SB X 3/4″ FNTP | 5″ | 3.70″ |
1″ (22187-0000LF) 1″ SB X 1″ FNPT | 6″ | 4.66″ |
AVAILABLE CONNECTIONS
SharkBite : 1/2″ through 1″
CERTIFICATIONS
The SharkBite Ball Valve 1/2″, 3/4″ and 1″ are certified to IGZ-157, NSF/ANSI 61, NSF 372 and listed by IAPMΟ.
www.sharkbite.com 2727 Paces Ferry Road Building 2- Suite 1800 Atlanta Georgia 30339 USA US Contact: 1-877-700-4242 customerservice@sharkbite.com Canadian Contact: 1-888-820-0120 canadasales@rwc.com
A Division of Reliance Worldwide Corporation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>