ANCEL M3 Portable Rechargeable LED Work Light User Manual
- June 15, 2024
- ANCEL
Table of Contents
ANCEL M3 Portable Rechargeable LED Work Light
Product Information
Specifications
- Model No.: M3
- Battery: 3.7 V 5000mAh
- Color: Black
- CCT: 3000K/4500K/6500K
- Luminous flux: 1200LM
- Dimming: Promise 10-100% dimming
- Lighting Mode: 5 Lighting Modes
- Waterproof: IP65
- LED Quantity: COB LED
- Working Time: 5-50 hours (depending on brightness settings)
- Input&output: 5V-2A
- Size: 4.62.24.7inch (11.65.512cm)
**Product Introduction
**
The latest ANCEL 3-in-1 led work light displays the remaining power status at any time and has 5 lighting modes, with a waterproof coefficient of up to IP65, which can be used for moving lights in the car, outdoor camping, and emergency charging treasures to meet your outdoor lighting needs and accompany your safety.
NOTE: Please read the user manual carefully before use and installation.
What’s in the Box?
- 1* Work Light
- 1* USB Cable
- 1* User Manual
- 1* Carabiner
Product Description
| 1. Lable position | 6. Bracket |
|---|---|
| 2. Power/Lighting color switch | 7. Hook |
| 3. Battery indicator | 8. Magnets |
| 4. USB output/Type-C input | 9. Tripod hole |
5. Higher/Lower lighting mode button
Operate Step Instruction
Step 1: ON/OFF
Press and hold the power button for 3 seconds to turn on/off.
Note : The default light mode is cold white (high brightness) when turning on the lights, and short press the button again to toggle from cold white-warm light-daylight-SOS-red light modes.
Step 2: Brightness Setting
By long-pressing the +/- button, you can dim continuously in each lighting
mode to choose the right brightness you need.
Step 3: USB Charging Port
Plug the USB charging cable into the Type-C port to charge your device. The
charging power is DC 5V/2A. The full charging time is 3 hours.
Step 4: USB Output Port
You can use it as a power bank. The port is USB output, and the output
power is DC 5V/2A.
Step 5: Installation
- Strong magnetic installation: There is a strong magnet at the bottom of the lamp, which can be magnetically attracted to the surface of metal-iron materials.
- Carabiner installation: The screw at the bottom of the lamp can be turned clockwise to install the carabiner, and the carabiner can be installed with a hook.
- Tripod installation: The screw at the bottom of the lamp can be turned clockwise to install the tripod.
Attention
- Do not stare at the LED light directly, it may hurt your eyes.
- Please use the USB charging cable to charge the lamp before use. The input power is DC 5V/2A, and it takes about 3 hours to fully charge. When charging, the blue charging indicator flashes, and when fully charged, 4 blue indicator lights are on at the same time, indicating 100% power, 1 blue indicator represents 25% power and the power can be judged according to the number of bright blue indicators How many.
- Charge your light at least every 3 months to maintain the battery status if not in use for long time.
- Do not immerse the light in water.
- Keep away from fire and high temperature.
- Do not drop, knock, throw or shake the fixture as this may damage the components inside.
- Do not attempt to disassemble, modify or repair the device yourself.
- If the battery becomes excessively hot, emits odour, gets dented or experiences any abnormal deformity you should stop using it immediately.When meeting any problem, feel free to contact us.
Contact Us
OBDSPACE TECHNOLOGY CO., LTD Address: D03, Block A, No.973 Minzhi Ave,
Longhua District, Shenzhen, Guangdong, China
- Web: www.anceltech.com
- E-mail: amazon@anceltech.com
FAQ’s
How long does the battery last on a full charge?
The working time of the ANCEL 3-in-1 led work light depends on the brightness settings. It can last between 5 to 50 hours.
Can I use the work light to charge my smartphone or tablet?
Yes, the ANCEL 3-in-1 led work light comes with a 5000mAh rechargeable battery that can be used to charge your smartphone, tablets, and other USB devices.
Is the work light and waterproof?
Yes, the ANCEL 3-in-1 led work light has a waterproof coefficient of up to IP65, making it suitable for outdoor use.
Can I adjust the brightness of the work light?
Yes, you can adjust the brightness of the work light by long-pressing the +/- button. It offers 10-100% dimming in each lighting mode.
How do I install the work light?
The work light can be installed using three different methods: strong magnetic installation on metal-iron surfaces, carabiner installation with a hook, or tripod installation. Portable white light/warm light/warm white light/red light/red light sos led work light 5 lighting modes. 5000mAh rechargeable battery to charge your smartphone tablets and other USB devices.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>