BYTECH AUBE166 RUGGED Earbuds True Wireless User Manual
- June 15, 2024
- Bytech
Table of Contents
AUBE166 RUGGED Earbuds True Wireless
**User Manual
BY-
AU-BE-166-AC
**
SPECIFICATIONS
-
IPX Level: 4
(Earbuds only, do not expose the case fo water.) -
Input Power: 5V—1A
-
Charging Time: Up fo 3 Hours
-
Charging Interface: USB Type-C
-
Case Capacity: 200mAh
-
Earbuds Capacity: 30mAh
-
Playing Time: Up fo 3 hrs/charge (Dependent on volume level)
-
Tofal Play Time: 15 Hours
-
Standby Time: Up to 168 Hours
-
Transmission Range: Up to 33 feet
Product Diagram
Charging the Earbuds
Make sure the case is charged. Place the earbuds in the correct ports in he
case. They will automatically begin charging. The earbud LED indicators will
be solid RED while charging. and will turn solid WHITE. then turn OFF when
fully charged!
On low power, a tone will be heard from the earbuds, indicating charging is
required.
Charging the Case
Plug fhe small connector of the included USB charging cable info the charging port ot the back of the case. Plug the large connector info a USB power source such as the USB port on a computer, or a 5V USB wall adapter (nof Included). The charging case’s charging indicator wil biink BLUE while charging. The charging indicator will be solid BLUE when the case is fully charged,
Powering ON/OFF
- The earbuds will automatically power ON when removed fiom the case. The earbud LED indicators will flash WHITE. then start charging when the earbuds are placed info he case.
- The earbuds can also be powered ON/OFF by pressing and holding (appx. 35) the Muli-buttons.
- When powered ON, he earbuds wil automatically pair with one another. Once paired with a device. the earbuds will automatically re-pair with that device. 50 long os the device is within connection range (33 f) and Bluetooth is enabled
- The earbuds will automatically power OFF If they have ot paired fo a Bluetooth evice affer 5 min
Wireless Pairing
- The earbuds will automatically power ON when removed fiom the case Both of thelr LED indicators wil fiash WHITE.
- After a moment, a fone will be heard on the sarbuds indicafing that they have paired fo each other. The LED indicator on fhe secondary earbud willfiash WHITE, and fhe LED indicator on fhe primary earbud will flash WHITE quickly.
- Set your mobile device 1o search for Bluetooth devices. When BY-BE-166 appears, select from the It of found devices.
- Once successfully paired, a fone will be heard and the LED indicator willfiash WHITE for 5 seconds.
Controlling Audio
Playback will be controlled from your paired device, or the controis listed below.
- 2x Press eifher Mulfifunction button fo pause playback. Press again o resume
- 1x press the RIGHT Multifunction button to increase the volume
- Tx press the LEFT Multifunction button to decrease the volume.
- Press and hold (appx. 15) the RIGHT Multifunction button to skip fo the next frack.
- Press and hold (appx. 15) the LEFT Mulfifunction button to skip 1o the previous track
Phone Calls
When paired fo a phone via Bluetooth, you can control phone functions using the controls listed on the next page.
- Ix Press either Multifunction butfon to answer on incoming phone call.
- 2x Press either Mulfifunction button o hang up.
- Press+ hold (appx. 1.55) either Mulfifunction button fo reject an incoming phone call
Activating Voice Assistant
- Press+ hold (appx. 25) either Multifunction button fo activate your device’s voice assistant.
WARNING:
- Do not se this unit for anything other than ifs intended use.
- Keep the unit away from heat source, direct sunlight, humidity, water or any other liquid « Do not expose the device to extremely high or low femperatures, as it may damage the battery.
- Do ot operate the unit if it has been wet o moist o prevent against electric shock and/or injury 1o yourself and damage fo the unit.
- Do not use the unit if it has been dropped or damaged in any way.
- Repairs o electrical equipment should only be performed by a qualified electrician. Improper repairs may place fhe user at serious sk
- Keep the unit out of reach of children, this product is not a foy.
This equipment comples with FCC radiaton expostre lmits setforth foran uncontroted envirorment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiolTV technician for help.
CAUTION : Any changes or modifications not expressly approved could void
the user’s authority to operate the equipment.
WARRANTY – 12 MONTH Please visit our website Bytechintl.com/warranty
02023 BYTECH NY INC. BYTECH” is a registered trademark of Bytech NY INC.
Bluetoothe is a registered trademark of SIG Inc. Google, and the Google
Assistant are registered trademarks of Google Inc.. registered in the U.S and
other countries. Side is a registered trademark of Apple Inc, registered in
the U.S and other countries.
- All Trademarks and copyrights are the property of the respective companies.
**Photos ore for illustration purposes only.
BYTECH
Contact Info: 2585 West 13th Street,
Brooklyn, NY 11223
bytechintl.com
**© 2023 BYTECH NY INC.
FCC ID: 2AHN6-AUBE1 66**
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>