Loligo Systems 90189084 Treadmill Swim Tunnel User Guide
- June 4, 2024
- Loligo Systems
Table of Contents
Loligo Systems 90189084 Treadmill Swim Tunnel
FIRST TIME USE
-
Follow the instructions provided in the Quick guide for large swim tunnel setup for general setup and maintenance of the Treadmill swim tunnel. You can find the latest version of the quick guide on our website:
www.loligosystems.com/manuals
FOR EACH TRIAL -
Set the power knob to STAND-BY and the direction knob to REV (2).
-
Connect the motor control box to the motor using the motor cable (2), and make sure to lock 3 the cable in place (3).
-
Connect the motor control box to a grounded wall outlet using the power cable (2).
-
Turn the VELOCITY WHEEL to change the conveyor belt speed (5).
The value shown on the display is the conveyor belt velocity in meters per minute (m/min.):- Minimum velocity = 0.16 m/min.
- Max velocity = 13.04 m/min.
-
You can save a given velocity by pressing the velocity wheel (6). The conveyor belt will then 6 start at this velocity, the next time it is powered on and set to RUN.
-
Set the power knob back to STAND-BY, when the trial is over.
IMPORTANT: Do not touch the motor shafts or conveyor belt during operation! Avoid having loosely hanging objects (e.g. hair or clothes) near any rotating parts. To start the treadmill motor, set the power knob to RUN (5). The conveyor belt will start moving at the last used velocity
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>