Toucon TVD300V-ML Wireless Video Doorbell V3 User Manual
- September 27, 2024
- Toucon
Table of Contents
Wireless Video
Doorbell V3
USER MANUAL
TVD300V-ML
Items included
Charge your video doorbell
Open the back cover, plug in USB cable to charge the video doorbell.
It is recommended to fully charge the device before first use.
LED Description
LED | Battery Charging |
---|---|
Description | Battery Fully Charged |
Get to know your video doorbell and chime
Doorbell
- Camera Lens
- Microphone
- LED Indicator
- Doorbell Button
- Motion Sensor
- Speaker
- SET / Power ON button
- RST / Power OFF pinhole button
- Charging portChime
- LED indicator
- SET button
- Speaker
Pairing your chime with your video doorbell
The chime and doorbell come pre-paired, but if you need to pair it again,
follow the instructions in this section.
Press and hold the SET button on the Chime until the LED blinks, about 3 seconds
Press and hold the
doorbell button for about 3 seconds to complete pairing with the chime
Chime LED Description
Flashing BLUE | Pairing Mode |
---|---|
Blue Flashes Once | Next Chime Sound Selected |
Setup your video doorbell
-
Download the Toucan App for Android or iOS Scan QR code or visit www.toucansolution.com/pages/toucan-smart-home-app
Ensure your Wi-Fi is set to 2.4GHz before commencing the pairing process (5GHz not supported) -
Open the app and create a free account
-
Tap the dashboard, then tap the “+” button.
-
Press and hold the SET button until LED light blinks to enter the setup mode
-
Follow the instructions in the Toucan App to complete the setup
Flashing BLUE | Setup Mode |
---|---|
Flashing PURPLE | Connecting to cloud server |
Flashing RED | Connection Failed |
LED Description
Install your video doorbell and chime
- Drill holes for the wall anchors. * **
- Insert the wall anchors.
- Use the included screws to mount the bracket.
- Place the doorbell on mounting plate
- Tighten the securing screw by turning it clockwise
- Optional: Place the adhesive tape on the back of the Chime, and stick it to the wall in a suitable location inside your home.***
- If using the adhesive to mount the bracket, stick the bracket to the surface and wait 24-48 hours to allow for maximum bond strength before adding the doorbell. Apply the 3M adhesive to clean, dry surfaces only.
** You can mount the bracket using the adhesive on UPVC, wooden or smooth surface door frames. The adhesive is not suitable for brick or stone.
*** The Chime will need to be placed within Bluetooth range of the doorbell. Test the Chime before sticking it in a location.
Please take care when installing the product using a ladder and drill, ensuring that the wall anchors are suitable for the wall it is being used in.
For FAQ’s and Support, please refer to the Toucan website (www.toucansolution.co.uk) or scan the QR code
Limited Warranty
Please register to activate your 1-year free warranty within the App or by
visiting our website:
www.toucansolution.co.uk. Proof of purchase
in the form of a bill of sale or receipted invoice, which is evidence that the
unit is within the warranty period, must be presented to obtain warranty
service.
VuPoint Solutions and VuPoint (Europe) Company Limited (herein referred to as
“VuPoint”, “us”, “we”, or “our”) warrants this Toucan Product (including any
included accessories) against defects in material and workmanship as follows:
For 1 year (12 months) from date of original retail purchase of this Product,
if Product is used primarily for personal, family, or household purposes
(“Household Consumer Use”), VuPoint will repair or replace the Product, at its
sole discretion, if the Product is determined to be defective due to material
or workmanship.
If Product is used for any other purpose than Household Consumer Use,
including but not limited to commercial, industrial, or other non-household
purposes, VuPoint will repair or replace the Product at no charge, at its sole
discretion, if the Product is determined to be defective due to material or
workmanship.
Before returning the product, please contact us for help and support. Details
of your local customer support can be found on our website:
www.toucansolution.co.uk
To obtain warranty services, you must deliver the Product at your cost in
either its original packaging or packaging that affords equivalent degree of
protection as the original packaging to the VuPoint service facility. Please
deliver the Product with an explanation of the defect, the dated sales
receipt, a return address, and contact details. Please allow 7 working days
for the Product to be tested for defects. This warranty does not cover
customer instruction, installation, set up adjustments or signal reception
problems. This warranty does not cover cosmetic damage or damage due to acts
of God, accident, misuse, abuse, negligence, commercial use, or modification
of, or to any part of the Product. This warranty does not cover damage due to
improper operation or maintenance, connection to improper voltage supply, or
attempted repair by anyone other than VuPoint service center. This warranty
does not cover Products sold AS IS or WITH ALL FAULTS, or consumables (such as
fuses or batteries). This warranty is invalid if the factory applied serial
number has been altered or removed from the Product.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY
OF THE CONSUMER, VUPOINT SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESSED OR IMPLIED WARRANTY ON THIS
PRODUCT, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED
WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS
PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some regions do not allow the exclusion or limitations of incidental or
consequential damages or allow limitations on how long an implied warranty
lasts, so the above limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may have other rights, which
may vary from region to region.
Warranty may vary according to local applicable law, please visit the website
to ascertain warranty services in your region.
For troubleshooting information and frequently asked questions, please visit
our website or contact customer support, details of which can be found on our
website for your region.
Regulations & Compliance
FCC Statement
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
EU Compliance
VuPoint (Europe) Company Limited hereby declares that Wireless Video Doorbell
V3 complies with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following Internet address:
www.toucansolution.co.uk/pages/certificates.
Manufacturer:
VuPoint Solutions, Inc. (USA):
12339 Denholm Dr, El Monte, CA 91732
VuPoint (Europe) Company Limited:
1 Devon Way, Longbridge Technology Park, Longbridge, Birmingham B31 2TS, UK
EU Authorised Representative:
CERTLabel UG
Mühlenstr. 8a, 14167 Berlin, Deutschland
For additional info, visit our website at
www.toucansolution.co.uk
Camera Input: 5V 2A (USB-C)
©2024 VUPOINT SOLUTIONS, INC. All Rights Reserved.
The Toucan logo and Toucan are trademarks or registered trademarks of VuPoint
Solutions Inc. in the United States and other countries. App Store is a
registered trademark of Apple Inc. iOS is a registered trademark of Cisco
Technology, Inc. in the U.S. and other countries and is under license. Android
and Google Play are registered trademarks of Google LLC. Product names, logos,
brands and other trademarks referred to herein are the property of their
respective trademark holders. All trademarks remain the property of their
respective holders, and are used only to describe the products or services
being provided. These trademark holders are not affiliated with VuPoint
Solutions, Inc. They do not sponsor or endorse VuPoint Solutions, Inc’s
products or services. please retain for future reference
References
- tion.com
- Toucan Smart Home Solutions – Toucan Smart Home UK
- Toucan Smart Home Solutions – Toucan Smart Home UK
- Home and Video Camera Solutions Online - Toucan Solution – Toucan Solutions
- Toucan Smart Home App – Toucan Solutions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>