STM32CubeProgrammer Software User Manual
- June 13, 2024
- ST
Table of Contents
STM32CubeProgrammer Software
Product Information
The product being referred to in the user manual is the STM32CubeProgrammer. It is a software tool developed by STMicroelectronics for programming STM32 microcontrollers. The STM32CubeProgrammer provides a user-friendly interface for programming and debugging STM32 devices and supports various programming methods such as JTAG, SWD, and UART.
The software can be downloaded from the official STMicroelectronics website using the following link: https://www.st.com/en/development- tools/stm32cubeprog.html
Product Usage Instructions
- Download the STM32CubeProgrammer software by visiting the following link: https://www.st.com/en/development-tools/stm32cubeprog.html
- Prepare a USB stick with the necessary update files. Ensure that the update files are compatible with the STM32CubeProgrammer.
- Locate the restart switch on the right side of the device.
- While holding the Boot0 button, press the restart switch. This will put the device into bootloader mode.
- Launch the STM32CubeProgrammer software on your computer.
- Connect the USB stick containing the update files to the lower USB port on the right side of the device.
- Wait for the update process to complete. Once finished, the device will automatically restart.
Please note that it is important to follow the given instructions carefully to ensure successful programming and updating of the STM32 microcontrollers using the STM32CubeProgrammer software.
- Download STM32CubeProgrammer https://www.st.com/en/development-tools/stm32cubeprog.html
- Prepare a USB stick with update files
- Press the restart switch on the right side while holding the Boot0 button
- Run STM32CubeProgrammer
- Connect the prepared USB memory stick to the lower USB port on the rght side of the device. After the Update is done the device will restart automatically
1. Download STM32CubeProgrammer https://www.st.com/en/development-
tools/stm32cubeprog.html
2. Prepare a USB stick with update files
3. Press the restart switch on the right side while holding the Boot0 button
4. Run STM32CubeProgrammer
5. Connect the prepared USB memory stick to the lower USB port on the rght side of the device. After the Update is done the device will restart automatically
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>