RAFFEL ACC PS2 QU2 01 Quad Power Station Installation Guide

June 15, 2024
RAFFEL

RAFFEL ACC PS2 QU2 01 Quad Power Station Installation Guide


PRODUCT OVERVIEW

Installation Instructions

drawings are not to scale

IMPORTANT SAFETY INSTRUCTIONS

WARNING : To reduce risk of injury to persons:

READ INSTRUCTIONS BEFORE OPERATING. INJURY MAY RESULT FROM IMPROPER USE. NEVER REMOVE COVERS.

  • This appliance should never be left unattended when in operation.
  • Unplug appliance from outlet before relocating or troubleshooting.
  • Do not connect an extension cord to this unit.
  • Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
  • Use this appliance only for its intended use as described in the operating instructions.
  • Do not use attachments not recommended by the manufacturer.
  • Keep all cords away from heated surfaces and pinch points.
  • Do not use outdoors. INDOOR USE ONLY.
  • Do not use on an infant or on a sleeping or unconscious person.
  • Do not use on sensitive skin. Prolonged exposure may have an adverse affect on sensitive skin – Always check the skin in contact with the heated area of the appliance.
  • Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Contact a service center for examination and/ or repair.
  • To disconnect, turn all controls to the off position, then remove plug from outlet.

DANGER – TO REDUCE RISK OF ELECTRIC SHOCK:

  • Do not reach for an appliance that has fallen into water. Unplug immediately.
  • Never use pins or other metallic fasteners with this appliance.
  • Discard the appliance if the covering shows any sign of deterioration, such as checking, blistering, or cracking.
  • Keep dry. Do not operate in a wet or moist environment.

ONE YEAR LIMITED WARRANTY

Raffel Systems warrants its products against all defects in materials and workmanship for a period of one year
from the date of purchase, subject to the following terms and conditions:

This warranty applies only for normal use of the product, and shall not be effective for products or parts
which do not function properly due to misuse, alteration, installation, accident, negligence, misapplication,
modification, improper maintenance or commercial use, or if any product or part has been serviced or repaired
by other than Raffle Systems. This warranty extends only to consumers and does not extend to Retailers.

This warranty is effective only if the product is operated in the country in which the product was purchased. A
product that requires modifications or adoption to enable it to operate in any other country than the country
for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications is not covered under this warranty.

Liability of Raffle Systems, shall be limited to repair or replacement of any defective product or part, which
option shall be the sole decision of Raffle Systems. This warranty is effective only on behalf of the original
owner of the product and is not transferable. This warranty is effective only if the user manual instructions have been followed.

THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. THERE SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS OR ANY OTHER OBLIGATION ON THE PART OF RAFFEL SYSTEMS WITH RESPECT TO PRODUCTS COVERED BY THIS WARRANTY. RAFFEL SYSTEMS SHALL HAVE NO LIABILITY FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. IN NO EVENT SHALL THIS WARRANTY REQUIRE MORE THAN THE REPAIR OR REPLACEMENT OF ANY PART OR PARTS WHICH ARE FOUND TO  BEDEFECTIVE WITHIN THE EFFECTIVE PERIOD OF THE WARRANTY. NO REFUNDS WILL BE GIVEN. IF REPLACEMENT PARTS FOR DEFECTIVE MATERIALS ARE NOT AVAILABLE, RAFFEL SYSTEMS RESERVES THE RIGHT TO MAKE PRODUCT SUBSTITUTIONS IN LIEU OF REPAIR OR REPLACEMENT.

To obtain warranty service on this product, mail the product and your dated sales receipt (as proof of
purchase), postpaid, to the following address:

Raffle Systems Consumer Relations
N112W14600 Mequon Road
Germantown WI 53022

No COD’s will be accepted.

INSTALLATION INSTRUCTIONS

  1. Choose a mounting location near a 120V power source. In the center, drill a 0.25” diameter hole.
    Installation Instructions

  2.  Insert the mounting bolt into the hole.Installation Instructions

  3. The power station has an area to grip the mounting bolt. Align with the screw and slide the power station onto the bolt.

  4. Thread the mounting nut onto the mounting bolt and tighten until the power station is snugly in place.
    Installation Instructions

  5. Plug power station into 120V power source.
    Installation Instructions

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

RAFFEL User Manuals

Related Manuals