RAFFEL SYSTEMS WCPBA01 Power Recliner Integrated Cup Holder w-Touch Sensor Control Instruction Manual
- June 1, 2024
- RAFFEL SYSTEMS
Table of Contents
RAFFEL SYSTEMS WCPBA01 Power Recliner Integrated Cup Holder w-Touch
Sensor Control
Specifications
- P/N: WCP XXXX 01 and WCP XXXX 01-YY
- Product Name: Embedded Wireless Charger
- Dimension: Outer Diameter – 92mm, Inner Diameter – 57mm, Height 30mm
- Weight: 55g
- Main Function: Wireless Charging Launcher
- Product Application: All wireless charging devices under QI standard
- Charging Type: One-to-one charging in the corresponding area
- Input Voltage: DC 2A/5VDC, 1.65A/9VDC, 1.2A/12V
- Launch Distance: 2-6mm
- Charging Power:
- Input 5V/2A – Output 5W (Max)
- Input 9V/1.65A – Output 10W (Max)
- Input 12V/1.2A – Output 10W (Max)
Product Usage Instructions
First: Safety Guidelines
For your safety and to prevent injury or property damage, adhere to the following guidelines:
- Consult a doctor before using if you have implantable medical devices like a pacemaker.
- Keep the equipment at least 50 centimeters away from implantable medical devices.
Second: Charging Method of Wireless Charging
The product can be embedded in office furniture and sofa armrests.
Follow these steps for wireless charging:
- Connect the product to a compatible adapter with specified characteristics.
- Place the device to be charged in the charging area to initiate charging.
Third: Product Parameter
Detailed information about the product
Frequently Asked Questions (FAQ)
Q: Can this product charge multiple devices simultaneously?
A: No, this product supports one-to-one charging in a corresponding area.
Product Instruction
- For your safety, please read this manual carefully before using this product.
- First: To prevent injury or damage to property, please strictly comply with the following guidelines:
- A) Warning! It may cause serious injuries or even casualties. People should consult a doctor before using implantable medical devices (such as a pacemaker).
- Please install your equipment 50 centimeters away from this product because it may influence the operation of implantable medical devices.
- B) Attention! It may cause fever, fire, and electric shock.
- Do not put the product in water or other liquids, avoid water into the product;
- Do not touch the AC adapter with wet hands to ensure the safety and integrity of the adapter
- Do not let dust accumulate on this product and adapter
- Do not use this product under ambient -10 degrees C and over 40 degrees C.;
- Do not use it in the places of direct sunlight or high temperature;
- Do not use the product where is slippery to avoid breakdown.
- Do not charge too close to magnetic sheets, magnetic recording media, and precision instruments
- Do not decompose and transform this product
- Do not put anything between the wireless charging transmitter board and the charging mobile phone
- When using plugs and other connections, do not exceed the rated value
- When using, please make sure that you have connected the AC adapter correctly to avoid any damage. Unplug the AC adapter from the plug when stopping using it.
- Do not use travel converters
- Do not let your children use it until they know how to use it.
Second: Charging method of wireless charging
The product can be embedded in office furniture and sofa armrests.
Diagram for using and installing
- Adapter
- Mobile phone
- Charging area
- Indicator light
- Connect the product to an adapter with the characteristics of “ 40 degrees C max. and altitude of operation at 2000m whose output meets ES1, and rated “5 Vdc 2A” or “9 Vdc 1.65A” or “12 Vdc 1.2A” only and marked LPS”, blue and green lights will alternately flicker when power is turned on;
- If the wireless charging product detects that there is no equipment to be charged in the charging area, the product will be on standby.
- Place the equipment (mobile phone) that needs to be charged in the charging area of the product, the green light is on; then the blue light will be on when it enters charging condition.
- After charging, the product is on standby, the blue light is on, then take it away.
- If there is a metal thing in the charging area (the center of the coil), blue and green lights flicker alternately and will disconnect wireless charging to protect the equipment
Third Product parameter
- P/N: WCP XXXX 01 and WCP XXXX 01-YY
- Product name: Embedded wireless charger
- Dimension: outer diameter is 92mm, inner diameter is 57mm, and height is 30mm Weight: 55 g
- Main function: Wireless charging launcher
- Product application: All wireless charging devices under QI standard
- Charging type: One-to-one charging in the corresponding area
- Input voltage: DC 2A/5V，DC 1.65A/9V，DC 1.2A/12V；
- Launch distance: 2-6mm
- Charging power: Input: 5V/2A
- Output: 5W(Max)
- Input: 9V/1.65A，Output：10W(Max)
- Input: 12V/1.2A，Output：10W(Max)
- Conversion efficiency：＞70%
- Charging way: Induction mode
- Working frequency: 110.5—148KHz
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used under the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Statement
This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the device and your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>