RAFFEL SYSTEMS WCPXXX01 Embedded Wireless Charger Instruction Manual
- October 30, 2023
- RAFFEL SYSTEMS
Table of Contents
RAFFEL SYSTEMS WCPXXX01 Embedded Wireless Charger
precision instruments 8) Do not decompose and transform this product 9) Do not put anything between the wireless charging transmitter board and the charging mobile phone 10) When using plugs and other connections, do not exceed the rated value 11) When using, please make sure that you have connected the AC adapter correctly to avoid any damage. Unplug AC adapter from plug when stopping using it. 12) Do not use travel converters 13) Do not let your children use it until they know how to use it.
Product Information
The Embedded wireless charger is a wireless charging launcher designed for all wireless charging devices under QI standard. The product has a dimension of outer diameter is 91mm, inner diameter is 50mm, and height is 30mm and has a charging power of 10W(MAX). The product uses induction mode for charging and has a working frequency of 110.5–205KHz. The product should be used with an adapter that outputs DC9V or any device with an input voltage of 2A/9VDC 2A/5VDC.
The product comes with certain safety instructions that should be followed to avoid any injury or property damage. People with implantable medical devices such as pacemakers should consult their doctor before using the product. The product should be installed 50 centimeters away from any implantable medical device. The product should not be put in water or any other liquid, and the AC adapter should not be touched with wet hands. Dust accumulation on theproduct and adapter should be avoided. The product should not be used under the temperature of -10—-40 and should not be used in places with direct sunlight or high temperature. The product should not be used in slippery places to avoid breakdown. Charging too close to magnetic sheets, magnetic recording media, and precision instruments should be avoided. The product should not be decomposed or transformed, and nothing should be put between the wireless charging transmitter board and the charging mobile phone. The rated value of plugs and other connections should not be exceeded. The AC adapter should be connected correctly to avoid any damage, and the adapter should be unplugged from the plug when stopping the use of the product. Travel converters should not be used, and children should not use the product until they know how to use it.
Product Usage Instructions
- Connect the product to an adapter that outputs DC9V or any device with an input voltage of 2A/9VDC 2A/5VDC.
- Place the wireless charging launcher in a location that is 50 centimeters away from any implantable medical device.
- Make sure that the product is not in contact with any water or liquid, and dust accumulation on the product and adapter is avoided.
- Make sure that the product is not used in places with direct sunlight or high temperature and not used in slippery places to avoid breakdown.
- Place the mobile phone on the wireless charging launcher in a corresponding area for one-to-one charging.
- Make sure that nothing is put between the wireless charging transmitter board and the charging mobile phone.
- The rated value of plugs and other connections should not be exceeded when using the product.
- Make sure that the AC adapter is connected correctly to avoid any damage, and the adapter should be unplugged from the plug when stopping the use of the product.
- Do not use travel converters, and children should not use the product until they know how to use it.
Product Instruction
For your safety, please read this manual carefully before using this product.
First: In order to protect you from injury and property damage, we clearly explain what you should follow:
- Warning! It may cause serious injuries or even casualties. People should consult the doctor before using implantable medical devices (such as using pacemaker). Please install your equipment 50 centimeters away from this product because it may influence the operation of implantable medical device.
- Attention! It may cause fever, fire and electric shock.
1. Do not put the product in water or other liquids, avoid water into the product;
2. Do not touch the AC adapter with wet hands to ensure the safety and integrity of the adapter
3. Do not let dust accumulate on this product and adapter
4. Do not use this product under the temperature of -10℃——40℃;
5. Do not use it in places of direct sunlight or high temperature;
6. Do not use the product where is slippery to avoid breakdown.
7. Do not charge too close to magnetic sheets, magnetic recording media and precision instruments
8. Do not decompose and transform this product
9. Do not put anything between the wireless charging transmitter board and the charging mobile phone
10. When using plugs and other connections, do not exceed the rated value
11. When using, please make sure that you have connected the AC adapter correctly to avoid any damage. Unplug AC adapter from plug when stopping using it.
12. Do not use travel converters
13. Do not let your children use it until they know how to use it.Charging method of wireless charging
Diagram for using and installing:
- Connect the product to an adapter that outputs DC9V or any device with an output voltage of DC9V, blue and green lights will alternately flicker when power is turned on;
- If the wireless charging product detects that there is no equipment to be charged in the charging area, the product will be on standby.
- Place the equipment (mobile phone) that needs to be charged in the charging area of the product, the green light is on; then the blue light will be on when it enters charging condition.
- After charging, the product is standby, the blue light is on, then take it away.
- If there is a metal thing in the charging area (the center of the coil), blue and green light flicker alternately and will disconnect wireless charging to protect equipment
Product parameter
- P/N: WCP HBP 01-02, WCP XX 01, WCP XX 01-YY
- Product name: Embedded wireless charger
- Dimension: outer diameter is 91mm, inner diameter is 50mm, and height is 30mm Main function: Wireless charging launcher
- Product application: All wireless charging devices under QI standard
- Charging type: One-to-one charging in the corresponding area
- Input voltage: 2A/9VDC 2A/5VDC
- Launch distance: 2-6mm
- Charging power: 10W(MAX)
- Conversion efficiency： ＞70%
- Charging way: Induction mode
- Working frequency: 110.5—205KHz
- P/N: WCP CL 02, WCP XX 02、WCP XX 02-YY
- Product name: Embedded wireless charger
- Dimension: outer diameter is 89mm, inner diameter is 55mm, and height is 30mm Main function: Wireless charging launcher
- Product application: All wireless charging devices under QI standard
- Charging type: One-to-one charging in the corresponding area
- Input voltage: DC 2A/9V
- Launch distance: 2-6mm
- Charging power: 10W(MAX)
- Conversion efficiency： ＞70%
- Charging way: Induction mode
- Working frequency: 110.5—205KHz
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and,if
not installed and used in accordance with the instructions,may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not accor in a particular installation. if this equipmemt
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced technician for help.
This equipment should be installed and operated with a minimum distance of 20 cm between the device and your body.