SPY ASSOCIATES Camstick 1080PNV 90 Degree Rotatable Camera User Manual

Camstick1080PNV
Manual

USER MANUAL
FCC CE

THANK YOU FOR PURCHASING THE CAMSTICK1080PNV

Please read this manual before operating the Camstick1080PNV and keep it handy.
Your purchase should include the following:
1 x Camstick1080PNV
1 x Manual
1 x Micro USB Cable

Contact 770-694-6921 if you are missing any of these components.

GET FAMILIAR WITH YOUR CAMSTICK1080PNV

CHARGING THE DEVICE

1. Plug the device into an AC adapter or computer’s USB port using the included Micro USB cable.
2. The device’s LED light will blink while charging.
3. Once done charging, the LED light will be a solid red.

POWERING THE DEVICE ON AND RECORDING VIDEO

1. Insert a microSD card into the device.
2. Hold the power button on the device for 2 seconds and let go. The LED will come on solid red to represent standby mode.
3. Quickly press the power button once to begin video recording.
4. The red LED will go out and turn solid blue for ~3 seconds and then the blue LED will go out.
5. The device is now recording video.
6. To save the video recording and return to standby mode, quickly press the power button once again and the red LED will come back on solid to represent the video file has been saved and the device has returned to standby mode.

HOW TO RECORD AUDIO FILES

1. Power the device on.
2. Quickly press the power button twice.
3. The red LED light will go out and the blue LED will flash 3 times and then go out.
4. The device is now recording audio.
5. To save the audio recording and return to standby mode, quickly press the power button twice again.
6.  The red LED will come back on solid to represent the audio file has been saved and the device has returned to standby mode.

HOW TO ACTIVATE NIGHT VISION

1. Power the device on.

2. Quickly press the power button once to enter video recording mode.
   • The red LED will turn out and the blue LED will come on solid for ~3 seconds and then turn out.

3. While the device is recording, hold the power button for 3 seconds to activate the NV IR LED on the front of the camera.

4. To turn night vision off, hold the power button for 3 seconds again while the device is recording and it will turn the night vision back off.

TRANSFER RECORDINGS TO YOUR PC

1. Connect your device to your computer using the USB cable.

2. Locate “Removable Disk” inside the (My) Computer folder.
   • AutoPlay Removable Disk > Open folder to view files
   Or…
   • Go to Start > Documents > This PC >Removable Disk

3. Open the Removable Disk drive.

4. Open the folder containing the recordings.

5. Double click to play back the file, or you can right-click it and choose ‘Copy’, and then right-click on your desktop and ‘Paste’ to save it to your PC.

CHANGING THE DATE/TIME STAMP & OTHER SETTINGS

1. Connect your device to your computer using the method found on pages 9 & 10.
2. Open the ‘Set.txt’ file and change the values like below.

Date/Time =YYYYMMDDHHMMSS

If it is 7/25/2022 at 3 PM, you would enter:

Date/Time =20220725150000

Motion 1080P =0

Change the 0 to a 1 if you want the device to record based on motion detection when you begin a video recording

TimeStamp =1

Change the 1 to a 0 if you do not want a time stamp to show on your videos

Loop Record =0

Change the 0 to a 1 if you want your device to loop record (deletes the oldest video to make room for a new one when the microSD card fills up)

TROUBLESHOOTING

THE DEVICE IS NOT RECORDING FILES

• Make sure the microSD card has enough space left.
• Make sure the device is fully charged.
• If you are using a microSD card that is 64GB or above, please format it with the formatting software found at http://www.mgidownloads.com/Formatting_SD_Cards/64GB%20SD%20Card%20Formatting.zip

OTHER PROBLEMS

• Call our technical support line at 770-6946921

TECHNICAL SPECIFICATIONS

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>