DEPSTECH DS580 Triple Lens Borescope User Manual

DEPSTECH DS580 Triple Lens Borescope

Specifications

• Model: DS580
• Dual Lens (5MP+1080P)
• Dual Lens (5MP+5MP)
• Three Lens
• Focal Range:
  • A Camera: 3-8cm (1.18-3.15 in)
  • B Camera: 4-11cm (1.57-4.33in)
  • C Camera: 1cm-(0.39in-)
• A Camera View: 5MP
• B Camera View:
  • Dual Lens: 5MP
  • Three Lens: 1080P
• C Camera View:
  • Three Lens: 1080P
• Screen Spec: 5 IPS LCD Screen
• Camera Diameter: [Camera Diameter]

Model| Dual Lens
(5MP+1080P)| Dual Lens
(5MP+5MP)| Three Lens
---|---|---|---
 Focal Range| A Camera| 3-8cm(1.18-3.15 in)| 4-11cm(1.57-4.33in)| 1cm-∞(0.39in-∞)
B Camera| 2-6cm(0.79-2.36in)| 2-6cm(0.79-2.36in)| 2-5cm(0.79-1.97in)
C Camera| /| /| 2-5cm(0.79-1.97in)
 Camera View| A Camera| 88°| 86°| 120°
B Camera| 88°| 86°| 78°
C Camera| /| /| 78°
Photo Resolution| A Camera| 5MP| 5MP| 1080P
B Camera| 1080P| 5MP| 1080P
C Camera| /| /| 1080P
Screen Spec| 5″ IPS LCD Screen
Camera Diameter| 9mm(0.35 in)
Video Spec| 1080P/15-30fps
Battery Life| 3-4H
Charging Time| 4H
Charging Voltage and current| DC 5V/2A

Packing List

Product Introduction

The Industrial Endoscope DS580 is a versatile device that allows you to inspect hard-to-reach areas easily. It features dual or three lenses, providing high-quality images and videos for various applications.

1. Power Button Hold this button for 2s to power on/off the endoscope.

2. • Single press to take a photo
   • Hold this button to start video record, and single press to end the video record.
3. • Click to brighten the LED lights of the camera
   • Move the cursor down (In the menu)
   • Click to dim the LED lights of the camera
   • Move the cursor up (In the menu)

4. • Click to dim the LED lights of the camera
   • Move the cursor up
   (In the menu)

5. • When previewing the interface, single press this button to rotate the image 180°
   • When previewing the interface, long press this button to switch lens.
   • Return function (after entering the album/settings menu, press this button to return to the previous level of operation interface)
6. • Hold this button for 2s to enter the album
   • Click to confirm choices (In the menu)

7. Menu

   • Click to enter the setting menu

8. Working Status LED Indicator & Charging Status LED Indicator

   • Blue LED Indicator flash: Low battery status
   • Blue LED Indicator on: Working status
   • Red LED indicator flash : Charging status
   • Red LED Indicator on : Charging finished

9. Aviation Connector

   • Connect the snake cable camera probe with this interface

10. TF Card Slot

    • Support up to 32G TF card
    • Please format it for the first time of usage

11. Type-C Charging Port

    • For charging (Type-C cable connected to the adapter)
    • For data transmission (Type-C cable connected to PC client)

12. Reset Button

    • Short click the reset button to shut down the device

13. Fill Light Button
    Click to control the external LED fill lights on/off

Product Features

• Power Button: Press and hold for 2 seconds to power on/off the endoscope.
• Working Status LED Indicator & Charging Status LED Indicator
• DEPSTECH is a booming technology company, specialized in creating various endoscopes and committed to make you feel more secure.
• DS580 is a high-performance industrial endoscope, equipped with 5″ IPS LCD Screen, has the camera and video functions and saves into TF memory card (Micro-SD card). Such camera uses high-performance CMOS chip that supports the record-high frame rate to get clear images with Bluart 2.0 technology, widely used in industrial maintenance, appliance maintenance, mechanical maintenance & design and other fields.

Special Warning and Notice

• This product is a camera of industrial endoscope, not applicable to medical or physical examination!
• In order to lengthen the battery life, it is recommended that you should charge the device once every 3 months, whether it is used.
• Do not try to replace internal battery by yourself, because unprofessional operation may lead to risks of personal injury due to battery overheating, etc. Safety and Protection
• Probe of camera is an electronic device of high precision, so please do not hit the probe of camera or pull the cables, which may lead to failure of the device.
• With IP67 waterproof layer, the probe shall be used with extra care and protected from scratches!
• Probe of camera is made from materials that are not high temperature resistant, so make sure the internal temperature of any internal combustion engine or other equipment whose internal temperature is higher has been cooled when they are examined, otherwise the device will be directly damaged!
• In case of device damaged, please do not dismantle it by yourself, but contact the seller or the supplier for more professional maintenance services.
• Children may not use this device independently without the guidance of adults.

Operating and Storage Environments

• The device should be operated at an ambient temperature of 32~113℉ (0~45℃).
• The device should be stored in a dry, clean, oil-free and waterless place without any chemical liquid.

UI Introduction
The device has a user-friendly interface that allows you to navigate through its features easily. It also supports multiple languages.

Tips:
Dual Lens: A:Main Lens B:Side Lens
Three Lens: A:Main Lens B:Side Lens(B) C:Side Lens(C)

Language Setting
The default language of the device is English.
Default language of the device is English; If other language is required, please follow the steps below

1. Click the MENU button to enter menu interface, select Language by pressing the button and then press the button, Enter the language setting interface.
2. Click button to select the language you need, and then press button to switch the language.

To change the language, follow these steps:

1. Click the MENU button to enter the menu interface.
2. Select “Language” by pressing the / button.
3. Press the button to enter the language setting interface.
4. Use the / button to select the desired language.
5. Press the button to switch to the selected language.

Photo/Video
The Industrial Endoscope DS580 allows you to capture photos and record videos for documentation purposes.

1. Take photos by pressing button.
2. Long press to start video recording, single press to end video recording.

Take Photos
To take a photo, press the button.

Record Videos
To start video recording, long-press the button. To end video recording, single press the button.

View Photo/Video

1. Long press in preview mode to enter the photo album.
2. Press to view photos.
3. Click to play videos.
4. Press to exit the photo album.

Delete Photo/Video

1. When viewing photos/videos, press MENU to enter the photo/video detail page.
2. Press to choose to delete the current file or all files.

Lens Switching
The Industrial Endoscope DS580 allows you to switch between different lenses for different inspection requirements. When the product is turned on, it defaults to the main lens. Long-press the button to switch the lens.

TF Card Formatting

1. On the preview interface, press the MENU button to enter the menu.
2. Press to select “Format” options.
3. Press the button to enter the option interface.
4. Select “OK” to confirm.
5. Wait for successful formatting.

Copy Photo And Video Files To Computer

To copy photo and video files to a computer, you have two options

Option 1: Use a TF Card Reader

1. Use a TF card reader to copy data directly from the TF card.

Option 2: Use a Type-C Cable

1. Connect the product to your computer using a Type-C cable.
2. Press the MENU button to enter the menu.
3. Select “Data transmission”.
4. Press the button to start copying files to the computer.

Note: If the device is not connected to a computer, click “Data transmission” on the setup interface. The USB icon will show up on the display. Press the button to exit.

1. Use a TF card reader to copy data directly.
2. Use a Type-C cable to connect to computer for copying Setting path.
3. Please connect the product to your computer.
4. Press the MENU button to enter the menu.
5. Select “Data transmission”.
6. Press the button to start copying to computer.

If the device is not connected with computer, click “Data transmission” on the setup interface, then USB icon shows up on the display; Please press the button to exit.
It is normal for “No Signal” to appear on the screen when you press the button to exit data transmission.

Charging Instructions

1. Connect the device to a DC 5V adapter for charging.
2. The red indicator light flashes when the device is charging and stays on when fully charged.

Guide For Accessories Installation
To install accessories, follow these steps

1. Turn counterclockwise to remove the protective cap.
2. Turn clockwise to tighten accessories.

Installation method

Turn counterclockwise-remove protect cap

Turn clockwise-tighten  accessories

FCC Requirement: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CE compliance: This device complies with EN 60065 standard, which means this device will not do harm to the user or products as following situations

1. Electric shock
2. High temperature
3. Radiation
4. Explosion from inner
5. Mechanical Harm
6. Fire Hazard
7. Chemical burns.

EU Conformity Statement: This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/35/EU, the RoHS Directive 2011/65/EU and Amendment (EU) 2015/863.
WEEE Notice: 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info
2013/56/EU (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www .recycle-this.info

EC REP 1: Like Sun GmbH. Planckstr.59, 45147 Essen, Germany
EC REP 2: DST Co., Ltd. Fifth Floor 3 Gower Street, London, WC1E 6HA, UK

Customer Services

• Please contact us if you have any questions, we love to hear from you www.depstech.com
• Email: support@depstech.com
• Facebook Official Page: @DEPSTECH. FANS

Shenzhen Deepsea Innovation Technology Co., Ltd.
Room 1901-1902, Jinqizhigu Building, No.1 Tangling Road, Nanshan District, 518055, Shenzhen, CN
Made in China

FAQ

1. Q: How do I change the language of the device?
   A: To change the language, follow these steps
   

2. Click the MENU button to enter the menu interface.

3. Select “Language” by pressing the / button.

4. Press the button to enter the language setting interface.

5. Use the / button to select the desired language.

6. Press the button to switch to the selected language.

7. Q: How do I switch between different lenses?
   A: Long-press the button to switch between different lenses.

8. Q: How do I delete photos/videos?
   A: When viewing photos/videos, press MENU to enter the photo/video detail page. Use the / button to choose to delete the current file or all files.

9. Q: How do I copy photo and video files to a computer?
   A: You have two options
   

10. Use a TF card reader to copy data directly from the TF card.

11. Connect the product to your computer using a Type-C cable. Press the MENU button to enter the menu. Select “Data transmission”. Press the button to start copying files to the computer.

12. Q: How do I charge the device?
    A: Connect the device to a DC 5V adapter for charging. The red indicator light flashes when the device is charging and stays on when fully charged.

References

• this.info
• DEPSTECH Official Website | Borescopes, Webcams, Endoscopes, Otoscopes
• HOME

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>