BoomtoneDJ BOOMASTER400 Active Column Speaker User Manual
- June 4, 2024
- BoomtoneDJ
Table of Contents
BoomtoneDJ BOOMASTER400 Active Column
Please read the manual carefully and keep it for future reference.
The lightning flash with the arrowhead symbol, within an equilateral Triangle,
is intended to alert the user to the presence of not insulated dangerous
voltages within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons. The exclamation point within
an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
CAUTION:
- Do not place any recipients filled with liquids, such as glasses or vases, on top of or directly next to the appliance. They could fall over, causing water to enter the appliance. Never pour out liquids over the appliance. Do not place small objects, such as coins or paper clips, on the appliance since they could fall inside the appliance and cause fire or a shock hazard! If any liquid or objects enter the appliance, pull immediately the mains plug out of the socket and contact a specialist.
- Only pull the mains plug out of the socket by the intended gripping surface. Do not pull it by the cable.
- Never plug the mains plug in or out with damp or wet hands
- Electrical appliances must be kept out of the reach of children. Be particularly careful if children are present. Children are not aware of the hazards involved in handling electrical appliances improperly. Children could attempt to poke objects into the appliance. There is a life-threatening danger of electrocution.
- Never place the appliance on an unstable or mobile surface. Persons could be injured or the appliance damaged by it fell down.
- AII persons involved in operating, installing, and servicing the appliance and putting it into service must be trained and qualified accordingly and observe these operating instructions.
- Defective main cables may only be replaced by specialists. The danger of shock hazard!
- If you are not sure about the correct connection or if questions arise which are not answered by the operating instructions, please do not hesitate to contact support or a specialist of your choice. Consult a specialist if you are in doubt about the operating principle or the safety of the product.
- Please unplug the adaptor and switch the unit off if you don’t use it for a long time, to avoid damage due to voltage surges.
- No naked flame sources such as lighted candles should be placed on the apparatus.
- A warning that batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
The device in operation cannot be exposed to extreme temperatures (not below 5 ° C and not above 35 ° C)
Use of the Remote Control
Please operate the remote control within a distance of 6m and 30° between the remote and the appliance. Aim the remote at the sensor. Remove all obstacles between the remote and the sensor. The remote control might not work properly if the sensor is exposed to strong sunshine. If the remote control doesn’t work properly, please check the batteries
RECOMMENDATIONS FOR BATTERIES
This symbol indicates that used batteries should not be disposed of with
household waste but deposited in separate collection points for recycling.
ATTENTION
Danger of explosion if battery is incorrectly placed. Only replace by the same
or equivalent type. Keep new and old batteries out of the reach of children.
If the battery compartment doesn’t close properly, stop using the product and
keep it out of the reach of children. Batteries shall not be exposed to
excessive heat such as sunshine, fire or the like. When the internal batteries
are not to be used, remove them to avoid damage caused by battery leakage or
corrosion.
WARNING:
The supplied remote control contains a battery. In case of ingestion, it might cause serious internal burns within only 2 hours that might lead to death. If you are in doubt whether the batteries have been swallowed or introduced into any other part of the body, contact immediately a doctor.
- Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your dealer about the way to proceed.
- In accordance with the requirements of CE standard
- Recycled products can be recycled
- The product is suitable for indoor use.
REMOTE CONTROL
- Standby
- Mute
- Repeat key (single repeat, repeat all) in USB/TF mode
- Mode key (Choose from AUX/USB/TF/BLUETOOTH). Long press to switch the LEDs on the woofer on or off.
- 0 – 9 keys
- Sound EQ mode key (To select from Rock, Pop, Jazz, Norm,…)
- Play / Pause
- Volume –
- Volume +
- Previous Track
- Next Track
- Stop
CONTROL PANEL
- Echo > to add echo effect on microphone sound
- Treble > to increase or decrease high frequency
- Bass > to increase or decrease low frequency
- Microphone input 1 (6.35mm jack)
- Microphone input 2 (6.35mm jack)
- USB / TF input
- Microphone Volume > to adjust the voulume of MIC 1 and MIC 2
- REC > to record sound of MIC1 and MIC2 on USB drive
- REPEAT > to repeat One track or all track (USB mode)
- MODE > to switch between USB-TF/ BLUE / LINE-IN
- POWER SWITCH ON/OFF
- Power led
- Main Volume control knob
- PLAY / PAUSE
- Previous Track (Hold to decrease the volume of USB)
- Next Track (Hold to increase the volume of USB)
- DC15V in > to connect to supplied AC/Dc adapter 15V – 4A
- MIC priority switch > reduce the sound of music when talk in the microphone
- AUX IN > to connect an MP3 ao other appliances with 3.5mm output phone jack
BLUETOOTH OPERATION
- Turn on the unit and press the MODE button on unit or on the remote control to
- Select the Bluetooth function. “blue” will start flashing on the display, the system automatically enters search mode.
- Activate the Bluetooth feature on the external device to be paired.
- Initiate a search for devices. The device shows up as “BOOMASTER400”
- Select it and enter the password «0000» if required.
- Play now the music from the device
- Press the PLAY button on the unit or the ‣ key on the remote control, to start playing and the buttons NEXT and PREV, or the keys and for the selection of songs.
MICROPHONE RECORDING
In USB/TF play mode: Long press on the record key to go into recording mode.
The current sound output will stop and go to mute status. The recording will
start when the screen displays 00:01. You can use a microphone to record. If
you connect the USB/TF card for the first time to the speaker, the system will
create a folder.
LINE IN MODE
- Press the MODE button (10) on the unit or on the remote control until ‘’LINE’’ appears on display.
- You can play music from the connected device (19) and adjust Volume
USB/TF OPERATION
Support music formats: MP3, WMA
- USB port: plug and play
- TF slot: plug and play
- Play/pause: Press to play, press to pause, press again to resume play.
- Previous/Next: During play press once to go back to the beginning of the track or to the next track.
- Repeat: During play press once to repeat the current song, press twice to repeat all songs.
Technical Specification
- Speaker ………………………………………………………………………………………………………….. 2 x 10″/25cm
- Tweeters ………………………………………………………………………………………………………………….. ……..1 x 1.5″
- Max. power ………………………………………………………………………………………………………………. 400W
- Power supply ……………………………………………………………………………………….. .. 100-240Vac 50/60Hz
- Adapter to use ……………………………………………………………………………………QDPOWER-1504A**
- Consommation électrique ………………………………………………………………………………………..40W
- Frequency response ……………………………………………………………………………….. 40Hz – 20kHz (+/-5%)
- Bluetooth frequency range …………………………………………………………………………….. 2402 – 2480MHz
- Max. BT RF emission ………………………………………………………………………………………………… 2.08dBm
- Dimensions …………………………………………………………………………………………… .350 x 295 x 1018mm
- Net Weight ………………………………………………………………………………………………………..14.7kg
Only the AC adapter with the characteristics below can be used with the BOOMASTER400 product:
- Manufacturer: MERRY KING ENTERPRISES CO LTD
- Address: 3F, No. 13 Buiding Cui Hu, Industrial Zone Huaide Village, Fu Yong Town, Baoan, Shenzhen, Guangdong, China
- Model: QDPOWER-1504A
- Input voltage: 100-240V~
- Input AC frequency: 50/60Hz
- Output voltage: 15Vdc
- Output current: 4A
- Output power: 60W
- Average active efficiency: 88.5%
- Efficiency at low load (10 %): 87.0%
- No-load power consumption: 0.18W
EU Declaration of Conformity
Conforms to the essential requirements of the:
Red Directive 2014/53/EU – ROHS Directive 2011/65/EU and 2013/863/EU – ERP
Directive 1275/2008/EC and 2019/1782 and 801/2013
Based on the following specifications apply:
RED Directive 2014/53/EU| ROHS Directive 2011/65/EU ROHS Directive
2013/863/EU| ERP Directive 1275/2008/EC ERP Directive 2019/1782, Regulation
801/2013
---|---|---
ETSI EN301 489-1 V2.2.3 (2019-11)
ETSI EN301 489-17 V3.2.4 2020-09) EN 55032:2015/A1:2020 EN55035:2017/A11:2020
ETSI EN300 328 V2.2.2 (2019-07) EN50663:2017
EN62368-1:2014+A11:2017
EN61000-3-2:2013 / EN61000-3-3:2013
| IEC62321-3-1:2013 Ed 2.0
IEC62321-5:2013 Ed 2.0
IEC62321-4:2013+AMD1:2017 CSv IEC62321-6:2015
IEC62321-7-1:2015 IEC62321-7-2:2017 IEC62321-8:2017
| EN50564:2011 EN50563:2011+A1:2013
Imported by BoomtoneDJ – MSC
9 Avenue Camille Flammarion 91630 Avrainville / FRANCE infos@msc-
distribution.com Tel : +33 1 69 34 80 62
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>