BoomToneDJ BOOMPAD800 Active LED Speaker with Battery and Dj Pad User Manual

: June 11, 2024
: BoomtoneDJ

Table of Contents

BoomToneDJ BOOMPAD800 Active LED Speaker with Battery and DJ Pad User
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BoomToneDJ BOOMPAD800 Active LED Speaker with Battery and DJ Pad User

Manual

INSTALLATION & SAFETY INSTRUCTIONS

Never install or use this appliance near any source of moisture: swimming pool, faucet, sink, bathtub, wet floor. Do not expose this equipment to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on the equipment. If any liquid or object enters the unit, unplug the unit immediately and contact your dealer.
Do not install near any heat sources such as radiators, heat registers, or other apparatus that produce heat, such as amplifiers. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Always make sure that the speaker is placed on a flat, stable and level surface (make sure that the legs of your tripod are fully extended for stability). It is best to get someone to help you set up the speaker at height.
BoomToneDJ accepts no liability for damage to property or persons caused by improper handling or failure to observe the safety instructions. The warranty does not apply.
Unauthorised modifications to the device are prohibited for safety and licensing reasons (CE).
The device belongs to the protection class lI, it must be supplied with 220 – 240V~ 50/60 Hz via the supplied adapter. Never attempt to supply the device with any other voltage.
Never connect or disconnect the mains plug with wet hands
To preserve the life of your battery, it is advisable to store it fully charged.
There are no user-serviceable parts or components. Do not attempt to open the unit yourself. In the event of a fault, contact your dealer. Any attempt by the user to repair the unit will void the warranty.
Never connect the appliance immediately after moving from a cold to a warm place. The condensation water that forms may damage the appliance or cause an electric shock. Wait until the appliance has reached room temperature before plugging it in. Wait until the condensation water has evaporated, which may take a few hours.

IMPORTANT NOTE: Electrical products should not be disposed of with household waste. Please have them recycled at specialised centres. Consult your local authority or dealer on how to recycle them.

ATTENTION!

Hearing damage.

High power levels can cause lasting hearing damage. Therefore, avoid proximity to loudspeakers used at high power levels. At high power levels, use hearing protection. Avoid prolonged exposure to SPL levels above 90dB

CONTROL PANEL

Control Panel

Play/Pause: Play/stop music in USB/Micro SD/BT mode, scan FM channel in FM mode
USB input and micro SD memory card
Previous button: Press and hold to decrease the volume of the music, press briefly to select the previous song
3.5 mm AUX input jack for line input
6.35MM microphone input jack
Power button. Press and hold to turn the power on or off.
Mode button: Press briefly to select USB/Micro SD/AUX/BT/FM mode.
Menu button: Press briefly to select Bass (b) or Treble (t) or Master Volume (U), then use the Prev (-) or Next (+) button to decrease or increase
Charge LED indicator: red light on charge, blue light full charge
DC 9V charging input socket. To charge the speaker
Extra bass effect increase button
LED mode and button for switching between different lighting effects
TWS function button: Two units in wireless BT mode, press this TWS button to start TWS pairing.
4 types of DJ effect selection buttons. Each press of button 14 will cause it to change color. And will give access to 4 x 16 different sounds
Microphone volume knob
Microphone echo button
Next button: Press and hold to increase the volume of the music, press briefly to select the next channel
Remote control receiver

Remote control receiver on top of the unit, please use the remote control alignment on top of the unit when using the remote control.

Stand-by button
Mode button to select BT/AUX/FM/USB
MUTE
Play/Pause. In Fm mode, to scan the radio stations
Next button in USB/SD/FM mode.
Previous button in USB/SD/FM mode
Selecting EQ in MP3 mode
Increase the volume
Direct access to songs on USB/SD
Stop
Decrease the volume
Repeat function in USB/SD

TECHNICAL DATA

Power supply| 9VDC-1.3A 11.7W via adapter
XDJ121T-090130
---|---
Speakers| 2 x 8”/20cm + 1.5” tweeter
Maximum music power| 700W
Battery type| Rechargeable 7.4V – 3600mAh
Battery life| 2 to 4 hours
Charging time| 3 to 4 hours
Power consumption| 11.7W max
Frequency response| 50Hz – 19KHz
Max Bluetooth transmit power| 2402 – 2480MHz
Bluetooth frequency range| -0.33dBm
Carton dimensions| 832 x 357 x 335 mm
Product dimensions| 740 x 310 x 290mm
Gross weight / Net weight| 8.4KG / 7.2KG

The battery cannot be changed by the user. Please contact your dealer when the battery reaches the end of its life.