AeroCool 500W80 Plus Bronze Power Supply User Manual
- June 15, 2024
- AeroCool
Table of Contents
AeroCool 500W80 Plus Bronze Power Supply
Before installation
- Make sure that the wattage and outout of your PSU are enough to power your system’s requirements.
- Make sure that the power cord is disconnected and that the PSU switch is turned off.
- This PSU was designed for NON-INDUSTRIAL desktop systems according to INTEL’s Desktop Platform Form Factors. Usage outside of these parameters, including cryptocurrency mining, might cause overheating, malfunction, or damage to your equipment and will void your warranty.
- DO NOT attempt to expand the connectors through adapters or other means.
- DO NOT operate in wet or damp conditions.
- Do NOT open the PSU casing, the unit operates with hazardous voltages, and there is no serviceable component inside.
- Do NOT remove the warranty sticker. Damage or removal of the sticker will void your warranty.
- Please visit Aerocool official website www.aerocool.io for detals on your PSU warranty policy.
How to Install / Connector Description
Before installing the PSU, unplug the AC power cord and make sure the 1/O panelis off.
1/0 panelis off
Connect 20+4-pin connector to the motherboard. [Note) The detachable 4-pin connector of the 20+4-pin is not suitable for ATX12V 4-pin connector. Incorrect connection may cause irreversible damage.
Connect ATX12V (CPU power) 4-pin or B-pin (by 4+4-pin) to the motherboard.
Connect SATA connector to devices, i.e. HDD/SSD/ODD.
Connect Molex 4-pin connector to devices, i.e. HDD/ODD/case fan.
Connect PCle 6-pin or 8-pin (by 6+2-pin) Nvidia 12pin to graphics card. [Note] Do not connect the PCle 6+2-pin connector to the ATX12V 8-pin connector. Incorrect connection may cause irreversible damage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>