Jceet A47 Electric Height Adjustable Standing Desk User Manual
- June 15, 2024
- Jceet
Table of Contents
Jceet A47 Electric Height Adjustable Standing Desk
IMPORTANT INFORMATION
READ CAREFULLY.
KEEP THIS INFORMATION FOR FURTHER REFERENCE.
GENERAL GUIDELINES
- Please read the following instructions carefully and use the product accordingly.
- Please keep this manual and hand it over when you transfer the product.
- This summary may not include every detail of all variations and considered steps.
Please contact us when further information and help are needed.
NOTES
- Please follow the assembly instructions precisely and only use the product as intended.
- If an odor is present when first opening the package, please leave the unwrapped product in a shaded and ventilated area for a few days to air out.
- Before assembly, please check the product for defects or missing accessories. If any defects are found or accessories are missing, do not use the product as damage or injury may occur;
- Please contact us for assistance and replacement.
- During assembly, please only slightly tighten all screws in their correct position first, then fully tighten them. A Philips screwdriver is recommended but not included.
- It is suggested you regularly check the product’s bolts and connections to ensure safe use.
- Assemble the item on a soft flat and clean surface to avoid scratches and damage.
WARNINGS
- During assembly, keep parts and packaging materials away from children and pets as they could cause injury and are a potential choking hazard.
- Avoid sharp objects or corrosive chemicals to prevent damage to the product.
- Please open the item slowly and cautiously to avoid pinching your hands with metal joints, especially for children.
Components
Please check you have all the pieces listed below
ASSEMBLING
CONTROLLER INSTRUCTION
Troubleshooting Guide:
- If your standing desk does not work properly, you may need to reset it.
- If any error codes appear, you need to reset it.
- If it still does not work after the reset, please contact us for more help.
Maintenance and Consideration:
- During daily maintenance, use a clean soft cloth to remove surface dust. Do not use a wet cloth or hard material to wipe the surface of the table.
- Avoid contacting the surface with acid-based chemicals.
- F or slight scratches, gently wipe with a soft cloth,you can smooth out scratches. A void attaching tape directly to the outer surface of the metal feet to prevent paint from peeling.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>