Jceet L59 Electric Standing Desk Instruction Manual

Table of Contents

Troubleshooting Guide

During daily maintenance, use a clean soft cloth to remove surface dust. Do not use a wet cloth or hard material to wipe the surface of the table.
Avoid contacting the surface with acid-based chemicals.
For slight scratches, gently wipe with a soft cloth, you can smooth out scratches. Avoid attaching tape directly to the outer surface of the metal feet to prevent paint from peeling.

Install K -AC Adapter, B -Controller, L -Wire Basket, and M-Hook on the desktop.

Stand the desk up and press the outlet box firmly into the desk.

Install the 11-Sync Rod and tighten the two screws at both ends of the Sync Rod.

Install the frame on the desktop.

Please pay attention to the direction when installing the 9 -Base-long.

Install the another 6 -Support Beam on the other side in the same way as in step 3.

Please check vou have all the pieces listed below

Please check you have all the pieces listed below

IMPORTANT INFORMATION READ CAREFULLY. KEEP THIS INFORMATION FOR FURTHER REFERENCE.

Please read the following instructions carefully and use the product accordingly.
Please keep this manual and hand it over when you transfer the product.
This summary may not include every detail of all variations and considered steps.
Please contact us when further information and help are needed.

NOTES

Please follow the assembly instructions precisely and only use the product as intended.
If an odor is present when first opening the package, please leave the unwrapped product in a shaded and ventilated area for a few days to air out.
Before assembly, please check the product for defects or missing accessories. If any defects are found or accessories are missing, do not use the product as damage or injury may оссиг;
Please contact us for assistance and replacement.
During assembly, please only slightly tighten all screws in their correct position first, then fully tighten them. A Philips screwdriver is recommended but not included.
It is suggested you regularly check the product’s bolts and connections to ensure safe use.
Assemble the item on a soft flat and clean surface to avoid scratches and damage.

WARNINGS

During assembly, keep parts and packaging materials away from children and pets as they could cause injury and are a potential choking hazard.
Avoid sharp objects or corrosive chemicals to prevent damage to the product.
Please open the item slowly and cautiously to avoid pinching your hands by metal joints, especially for children.