DREO DR-HSH006 PTC Fan Heater User Manual

: June 13, 2024
: DREO

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
KNOWING YOUR HEATER
USING YOUR HEATER
CLEANING AND MAINTENANCE
DREO CUSTOMER CARE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DREO DR-HSH006 PTC Fan Heater User Manual

Thanks for Choosing DREO!
Your support means the world to us. We hope you enjoy our product as much as we did creating it.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic, precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons and hyperthermia, including the following:

Warning: In order to avoid overheating, do not cover the heater.

Do not use the fan heater near flammables and combustibles

GENERAL SAFETY

Read all instructions before using this heater.
This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
Use the handle to move this heater.
Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock or fire, or damage the heater. 6. The output of this heater may vary and its temperature may become hot enough to burn exposed skin. Use of this heater is not recommended for persons with a high sensitivity to heat or an inability to react to avoid burns.
Do not attempt to modify or repair the product by yourself. Doing so could vold the warranty and cause damage or personal injury. Only a repair technician may disassemble or repair this product.
Make sure that no pieces of polystyrene or other packaging material have been left between elements of the appliance. It may be necessary to pass over the appliance with a vacuum cleaner.
If the machine is not working as it should, has received a sharp blow, has been dropped, damaged, left outdoors, or dropped into water, do not use and contact Customer Support.
There may be a trace of smoke or odor when the unit is first operated. This Indicates that a drop of oil fell on the heating coll during the manufacturing process. It will quickly evaporate and should not re-occur

LOCATION SAFETY

Do not use outdoors
Ensure the heater is on a stable, secure surface to eliminate the potential of tipping it over
Keep combustible materials such as furniture, pillows, bedding, papers, dothes, and curtainis atleast 3 feet 10.9 m) from the front of the heater and keep them away from the sides and reas
A heater has hot and arcing or sparkong parts inside. Do not use it in areas where gasoline, paint or flammable liquids are used or stored.
To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
This heater is not intended for use in bathrooms, laundry areas and similar Indoor locations:
Never locate beater where it may fall into a bathtub or other water container.

ELECTRICITY SAFETY

Always unplug heater when not in use.
Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any mannen Discard. heater, or return to authorized service facility for examination and/or repair,
Do not run cord under carpeting. Do not cover cord with throw rugs runners, de similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be Tripped over.
To disconnect heater, turn controls to off, then remove plug from outlet
Always plug heaters directly into a wall outletreceptacle. 6. Never use with an extension cord or relocatable power tap outletpower stripl
If there is a loose fit between the plug and the socket or the plug becomes very hot, the socket may need to be replaced. Check with a qualified electrician to replace the socket.
It is normal for the plug and cord to feel warm to the touch
A plug or cord which becomes hot to the touch or becomes distorted In shape may be a result of a worn electrical outlet worn outlets or receptacles should be replaced prior to further use of the heater. Plugging the heater into a worn outlet/receptacle may result in overheating of the power cord or fire.
This appliance has a polarized plug (one prong is wider than the other). Ta reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to rig this safety feature
Hyperthermia can result in death. Symptoms of hyperthermia include high body temperature, headache, nausea, vomiting, tiredness, dizziness, fainting, and rapid pulse. If you begin to experience symptoms related to hyperthermia, turn off the heater and seek medical attention.
To avoid excessive room temperatures which can cause hyperthermia: DO NOT leave product running unattended in a confined space around infants, or individuals with reduced physical, sensory, or mental capabilities.
Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or Injury to persons.
CAUTION- High temperature, keep electrical cords, drapery, and other furnishings at least 3 feet (0.9 m) from the front of the heater and away from the side and rear.
WARNING – Risk of Hyperthermia.

WARNING – Risk of Heat Stroke (Hyperthermia)
Hyperthermia can result in death in infants or others Use caution to avoid overheating individuals Read and follow all instructions before use

FOR HOUSEHOLD USE ONLY READ AND SAVE THESE INSTRUCTIONS

Gentle Reminder:

Check the appliance regularly and refer to TROUBLESHOOTING or contact our customer support it it shows any of the following signs:

Power cord or plug is damaged.
Loud noise, unusual smell or excessive heat,

Specifications

Model: DR-HSH006 DR-HSH006A
Rated Power: 1500W
Input: 120V-60Hz

HOT SURFACE
THE FRONT SURFACE CAN BE VERY HOT DURING USE. DO NOT TOUCH WHEN IN USE

KNOWING YOUR HEATER

Package Contents

USING YOUR HEATER

Control Panel

Power On/Off
Touch to turn the heater on or off.

Note:

When the heater is plugged into the electric outlet, the power indicator will light in red
Once turned off, a 30-second countdown will show up on the display as the fan will continue to run for 30 seconds to blow out the remaining heat.

Mode Settings
Touch to switch between ECO-

Power heat with three heating levels H11000W/H2(1300W) H3 (1500W)

The heater will automatically select its optimal heating power, depending on the difference between the net temperature (41-95 °F) and ambient temperature.

Note:

When the ambient temperature reaches the set temperature, the heater will turn off automatically in 30 seconds.
When the ambient semperature drops below the set temperature, the heater will operate on low or high power (OGOW or 1500W), depending on the difference between the two temperatures

Mute/Unmute
To turn on/off the button sounds, long press the Mode button on the panel for 35.

Auto-Off Timer

When the heater is on, touch to set a timer (0-12h). After the timer ends, the heater will turn off automatically.
To cancel, set the timer to 0 hour.

Heat Level/Temperature

In Power Heat mode, touch or to adjust the heating level.
In ECO mode, touch or to adjust the set temperature.

Note:
In ECO mode, the heater will turn off automatically when the set temperature has been reached. If your heater turns off frequently, please raise the set temperature, or switch to Power Heat mode.

Child Lock
Long press and for 3s to activate/deactivate the Child Lock function, when activated, the display will show “LC, and all the buttons on the space heater will be locked.

LED Display

More Features

Display auto turns off after 1 minute.

Memory Function
The heater will remember its last settings (temperatures, working modes, oscillation status) once turned on again.

24-Hour Auto Off
This feature is not ON by default.

When this feature is ON, the heater will shut off automati- cally after continuously running for 24 hours

Long press the timer for 3 seconds to turn this feature ON/OFF when this heater is on standby. The display will show “ON” and “OF” respectively.

Tip-Over Protection
When the heater is tipped over, it will shut off automatically with the error code “P4” on the display.

Overheat Protection
When the heater overheats, it will shut off automatically with the error code “FF” on the display

CLEANING AND MAINTENANCE

Cleaning and Maintenance

Always turn off and unplug before cleaning

Outer Surface
Use a soft, dry cloth to gently wipe clean the outer surface.

Air Inlet
Use a soft, dry cloth or a cotton-tipped swab to remove any dust from the air inlet

ATTENTION

DO NOT unscrew the unit.

DO NOT use cleaning agents.

DO NOT use abrasive scrubbers.

Fire or electrical shock hazard. DO NOT immerse the main unit in water. NEVER allow water to get inside the heater.

Except for cleaning, any servicing should be performed by an authorized service representative.

Store in a cool, dry area and keep the cable out of high-traffic areas to avoid tripping hazards.

DREO CUSTOMER CARE

Default 12-Month Warranty

This appliance is covered by Dreo warranty for 12 months from the date of Its original purchase.

Extend Your Warranty

Extend your warranty by registering your new appliance on our website https://dreo.com/warranty.

The warranty will not apply in cases of:

Accident, misuse, or repairs performed by unauthorized personnel.
Any unit that has been tampered with or used for commercial purposes.
Normal wear and tear of wearable parts
Use of force, damage caused by external influences.
Damage caused by nor-observance of the User Manual, e.g. connection to an unsuitable mains supply or noncompliance with the instructions
Partially or completely dismantled appliances.
Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by Drea.

We can only provide after-sales service for products that are sold by Drea or Dreo authorized retailers and distributors. If you have purchased the appliance from a different place, please contact your seller for return and warranty issues.

Extend Warranty to 30 Months

Scan or visitdreo.com/warranty
to extend your warranty for free by registering your product. If you have any product issues, we always stand ready to help.

support@dreo.com
www.dreo.com
888-290-1688
Mon-Fri, 9:00 am-5:00 pm PST/PDT