Magic C3D9192P USB-C Dock Dual 4K HDMI with 140W GaN PD3.1 Power Adapter Installation Guide
- June 15, 2024
- MAGIC
Table of Contents
Magic C3D9192P USB-C Dock Dual 4K HDMI with 140W GaN PD3.1 Power Adapter
Holder assembly
Step 1
Step 2
Features
- Supports dual 4K HDMI™ (4K@60Hz + 4K@30 Hz)
- Supports Power Delivery 3.1 140W power in
- Reliable network connectivity via the Gigabit Ethernet
- Two USB™ 10Gbps and two USB™ 5Gbps ports for connecting peripherals
- Cable storage compartment
- Security lock
- Up to 15W Max fast wireless charging. Compatible with iPhone® MagSafe®.
- The wireless charging will not work without connecting a USB-C® power adapter.
System requirements
- Available USB-C® port that supports DisplayPort™ alternate mode and USB™ Power Delivery 2.0/3.0 or 3.1
- Please refer to the manufacturer of your computer for more information about your device
- The host device must support DisplayPort™ 1.4 to achieve 4K resolution at 60 Hz
Special notes
- Driver installation is required for macOS® and Windows®. If the computer has network access and administrative rights, Windows® can automatically install the driver when the device is plugged in.
- For the computer to charge you must connect a USB-C® power adapter and the computer must support Power Delivery.
- If you are using high-powered USB™ devices, attach a USB-C® power adapter to the power delivery port to ensure maximum performance. To avoid disruption, do not remove the power adapter while copying files.
- We advise no more than one (1) bus-powered/portable external hard disk drive to be connected to the adapter at a time.
- The 15W wireless charging will only work when a USB-C® power adapter over 60W is connected to the dock.
- Please check the bottom of the product for marking information
Windows® 11/10 – Display Driver Installation
The driver will automatically download & install on Windows® 11/10 devices
when the device is plugged into the computer. (Plug & Play requires internet
access and administrative rights)
Step 1: Download Driver From Our Website
For manual installation, keep the device unplugged. You can download the
latest driver at https://www.mct.com.tw/ under Support>Downloads/Drivers,
then search for the product by entering the model number or by scrolling down
to your product and clicking on the Windows® driver button.
Step 2: Install Driver
Click on the file that should appear near the bottom left or top right of your
web browser to begin the installation, then follow the prompts that appear
(You may have to navigate to your Downloads folder to open the file to begin
the installation. To navigate to the Downloads folder, click on the Windows®
icon at the bottom left corner (Windows® 10) or center (Windows® 11) of your
screen then search for Downloads, and open the file). If possible, open the
file as an administrator by right-clicking the file and selecting “Run as
administrator.”, otherwise, try double-clicking the file.
Step 3: Restart Device
Once the installation has completed, click “Restart” to finish installing the
software. After your computer has restarted, connect the device to the
computer, then connect your displays, peripherals, and/or power adapter
(optional) to the device. Now you are ready to use your device!
Step 4: Display Settings (Optional)
You can configure and rearrange your displays through the Windows® display
settings. To access the display settings, right-click on the desktop/wallpaper
and select “Display Setting” from the menu that appears.
Step 5: Select Sound Device(Optional)
You may need to select your sound device afterward, do so by clicking on the
Windows® icon at the bottom left corner (Windows® 10) or center (Windows® 11)
of your screen then search for Control Panel > Hardware and Sound > Sound >
from here you can select your default speakers and microphone. Right-click on
your desired device for extra options. Select “Default Device” to set your
default audio playback device or select “Set as Default Communication Device”
to select your default microphone.
macOS®10.14 or later – Display Driver Installation
Do NOT plug the USB™ display device into the computer until instructed for a
simpler install
Step 1
Make sure the device is unplugged from the Mac®, and download the latest
driver from https://www.mct.com.tw/ under Support > Downloads/Drivers then
search for the product by entering the model number or by scrolling down to
your product and clicking on the macOS® “DOWNLOAD” button that corresponds to
the macOS® version your Mac® is running (to find your macOS® version, click on
the Apple® icon at the top left, then click “About this Mac®”).
Step 2
Open Finder, then select “Downloads”, locate, and double click the file named
“USB_Video_AdapterDriver(Version).dmg”. Right-click or 2-finger click the
.pkg file (it will have an icon of an opened box). The installation window
will appear, and continue through the steps within the window.
Step 3
(For M-series Mac® computers 2020 OR LATER otherwise skip to Step 4) If your
Mac® is using Apple® silicon then you may receive a prompt to install Rosetta
which is required for installation to work, click the “Install” button, enter
your password then click “Install Software”.
Note : This Step may not occur if Rosetta is already installed and will
not occur if your Mac® has an Intel® processor.
Step 4
At the beginning of the installation, you will be prompted to enter your
password. Enter your password then click “Install Software”. After the
installation has finished click on “Restart” and a prompt will appear asking
if you want to move the Installer to the Trash (which option you choose won’t
affect the installation but will keep or remove the installer in your
downloads folder). After you select an option, the computer will restart.
Step 5
(Only applies to macOS® 13 or later) Plug in the device. You will then see a
prompt that reads “Allow accessory to connect?”, click on “Allow”.
Step 6
(Optional but recommended) You will receive a notification that reads “USB
Display Device Notifications”, click on the notification OR click on the
Apple® icon at the top left > System Settings > Notifications > USB Display
Device > Then make sure “Allow Notifications” is on.
Step 7
(Only applies to macOS® 11 or later) A USB Display Device window should have
also appeared that should have an “Activate USB Display Driver” button, click
on the button. You will receive a System Extension Blocked prompt, click on
“Open System Settings” where you will see a message under A security that
reads System software from the application “USB Display Device” was blocked
from loading. Click on the “Allow” button, enter your password when prompted,
then click on “Modify Settings”. * Note: The “USB™ Display Device” application
should open automatically, if it does not open launch the application via
launchpad or the macOS® dock at the bottom.
Step 8
(Only applies to macOS® 10.15 or later) Connect your monitor, TV, or display
to the device. You will receive a Screen Recording prompt that reads
“DJTVirtualDisplayAgent” Would like to record this computer’s screen and
audio.
Note: if you do not see this prompt please try plugging your monitor, TV,
or display into a different display port on your device if it has it. Click on
“Open System Settings” OR click on the Apple® icon at the top left > System
Settings > Privacy & Security > Screen Recording and allow
DJTVirtualDisplayAgent.
Step 9
Unplug then reconnect the device, afterwards all connected displays should be
working! You can click on the Apple® icon > System Settings > Displays to
adjust your display settings. Click on “Arrange…” and just set the layout of
your displays.
Step 10 (Optional)
Click on the Apple® icon > System Settings> Sound > under Output & Input
select “Sound”, here you can select which device has sound output. For more
detailed instructions, please open the README.pdf file inside the
USB_VideoAdapter Driver.dmg file that was downloaded from our website.
Note: For operating systems older than macOS® 13 you may need to navigate
to System Preferences > Security & Privacy > General > then allow “Magic
Control Technology” or “USB Display Device” during installation.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body. This device
complies with Directive 2014/53/EU and UK R adio Equipment Regulations 2017 SI
2017/1206. issued by the Commission of the European Community.
Declaration of Conformity
Hereby, Magic Control Technology Corporation declares that the radio equipment
type USB-C® Dock Dual 4K HDMI™ with 140W GaN PD3.1 P ower Adapter complies
with Directive 2014/53/EU and UK R adio Equipment Regulations 2017 SI
2017/1206.
Operating Frequency: 127.8kHz~148kHz
NCC / FCC Field Strength: -4.8 dBuV/m(@300m)(AV)
EN300 330 / EN303 417 Field Strength: 4.99dBuA/m(0.001486mW)
IC Field Strength: 24.9 dBuV/m
Copyright© 2023 Magic Control Technology Corporation. All rights reserved. All
trade names are registered trademarks of their respective owners. Features and
specifications are subject to change without notice. The product may not be
exactly as shown in the diagrams.
Magic Control Technology Corp.
10F., No.123, Zhongcheng Rd., Tucheng Dist., New Taipei City 236, Taiwan
R.O.C.
Tel : +886-2-2268-9300
Website : www.mct.com.tw