GE APPLIANCES PT7050SFSS Series 30 Built In Single Convection Wall Oven Installation Guide

GE APPLIANCES PT7050SFSS Series 30 Built In Single Convection Wall Oven

Product Information

Specifications

• Product Name: Shabbos Keeper
• Compatible with: GE Appliances Wall Oven
• Model Number: 49-2001303 Rev. 0 08-23 GEA

Description

The Shabbos Keeper is a device designed to be installed on GE Appliances Wall Oven to enable Shabbat mode functionality. It allows users to comply with Shabbat restrictions by controlling the oven’s operation during the Sabbath.

Product Usage Instructions

Preparing the Cabinet

1. Determine the precise location of your wall oven according to the installation instructions provided with your appliance.
2. Once the hole is cut for the wall oven, measure back from the front of the opening by a minimum of 20 inches and an inch below the top of the step.
3. Locate the hole for the Shabbos Keeper RJ45 cable between the step down on top of the wall oven and the rear of the oven, ensuring it does not interfere with the highest portion of the oven.

Connecting RJ45 Cable

1. The unit is shipped with the cable connector available for the RJ45 cable.
2. To expose the connection, remove the screw from the black bracket on the rear step of the wall oven.
3. Reinstall the screw removed earlier from the bracket, overlapping it to secure it to the oven.
4. Gently pull out the bracket to expose the RJ45 connector.
5. Use one of the supplied adhesive strips to secure the bracket to the top of the step-down portion of the oven.
6. Insert the supplied RJ45 cable into the connector.
7. When installing the wall oven, pull the cable through the drilled hole in the cabinet.
8. Connect the Shabbos Keeper module to the cable. Note: Ensure that the hole does not force the RJ45 connection to bend more than 30 degrees from straight.
9. The module can be mounted with the supplied adhesive strips inside the cabinet where the hole was cut or left on the shelf.

For further instructions, refer to

• Your appliance Owner’s Manual
• The manual supplied with the Shabbos Keeper

FAQ

• Q: What is the purpose of the Shabbos Keeper?
• A: The Shabbos Keeper enables Shabbat mode functionality on GE Appliances Wall Oven, allowing users to comply with Shabbat restrictions during Sabbath.
• Q: How should I determine the location for the Shabbos Keeper RJ45 cable?
• A: Measure back from the front of the wall oven opening by a minimum of 20 inches and an inch below the top of the step. The hole for the RJ45 cable should be located between the step down on top of the wall oven and the rear of the oven, avoiding interference with the highest portion of the oven.
• Q: Can I mount the Shabbos Keeper module inside the cabinet?
• A: Yes, the module can be mounted inside the cabinet using the supplied adhesive strips. Ensure it is placed where the hole was cut for the cable.

Preparing the Cabinet

• Determine the precise location of
  your wall oven according to the installation instructions that came with your appliance.

• Once the hole is cut for the wall oven, determine the location for the Shabbos Keeper RJ45 cable by measuring back from the front of the opening by a minimum of 20” and an inch below the top of the step.

• The connection for the RJ45 cable is located on the rear of the “step” on the oven.

• You will want to locate the hole between the “step down” on top of the wall oven and the rear of the oven so as not to interfere with the highest portion of the oven.

Connecting RJ45 Cable

• The unit is shipped with the cable connector available for the RJ45 cable.

• To expose the connection, remove the screw from the black bracket on the “step’ of the rear of the wall oven.

• Gently pull out the bracket to expose the RJ45 connector.

• Use one of the supplied adhesive strips to secure the bracket to the top of the step-down portion of the oven.

• Reinstall the screw removed earlier from the bracket. This screw will overlap the bracket and help to secure it to the oven.

• Insert the supplied RJ45 cable into the connector.

• This cable will be pulled through the drilled hole in the cabinet when the wall oven is installed. Once the cable is through the hole, connect the Shabbos Keeper module.
  Note: The hole must not force the RJ45 connection to bend more than 30 degrees from straight.

• This module can be mounted with the supplied adhesive strips to the inside of the cabinet where the hole was cut or may be left on the shelf.

• For instructions for use, see your appliance Owner’s Manual and/or the manual supplied with the Shabbos Keeper.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>