EGRET Hypochlorous Acid Generator Instructions
- June 5, 2024
- EGRET
Table of Contents
EGRET
INSTRUCTIONS
Features
-
Salt+ Water+ Egret EO = Awesome!
Just use potable tap water, add salt and push the button to add electrifying energy of Egret EO! It generates EO water with hypochlorous acid. -
Easy Charging
USB Cable included, please fully charge before first use …. approximately 2-3 hours for the first charge-watching it charges will not speed up the process (we tried!) -
Functions
Generates Electrolyzed water, Hypochlorous Acid between 50PPM and 200PPM with Ph between 7.0 – 7.5
Advantages
- Egret EO is portable and so simple to use! Once the EO water is generated, simply pull the trigger to spray
- The spray gun “blaster” atomizes the solution
- Can be used to generate and spray fresh solution for up to 3 cycles (30 minutes). Transfer any remaining solution to a spray bottle and use it for up to 4 days. So many uses! Keep a bottle of EO water handy in your pet areas, laundry room, bathroom, and bedroom. Freshen the sheets and the air! Clean everywhere!
- The ergonomic design featuring a rubber back handle is easy to grasp!
Specifications
Size:230x110x250mm
Weight:28.2OZ (800g)
Capacity:800ml
Battery Capacity:900mAh/9.99Wh
Charging Voltage-current:SV 2.lA
Rated Power:lOW
Rated Voltage:DCll.1 V
Charging time:-2.2h
Materials:ABS/PP/PC/TPR/Silica Gel
Available Chlorine Content:6ppm (tap water)-200ppm (adding salt)
Hydrogen Content:Over 600ppb
Accessory:Charging Line Type C
Component Diagram
How to use
- Please read notes before use
- Add water: hold the bottom of the water container with the left hand, rotate 45 degrees counterclockwise with respect to the water container with the right hand holding the body, and take it off. Fill the container with 800ml tap water (bottom of Max line], and add 1 tsp (measuring spoon] of salt. Install the container of the body reversely
- Touch the power switch and the indicator lights and blue LED will flash while EO creates EO water! In about 3 minutes, flashing will stop and the unit will be able to blast for about 7 minutes more. The total cycle time is 10 minutes from the press of a button. You may cycle THREE times to create up to 200ppm of solution and continue blasting. After 3 cycles we recommend transferring the remaining solution to a spray container, or making a fresh batch!
- To spray pull the blue trigger
- Tum off by touching the power button a second time. If you turn it on again after this, a new cycle will begin for 10 minutes total.
- The battery indicator will show a white light when it is charged above 20%, orange means 10-20% and red means it’s time to recharge
- To charge, connect the power. An orange indicator shows charging, which will turn white when complete
Attention
- Use only as per instructions. View the online FAQ
- DO NOT MIX with other products Egret EO is an effective and safe, non-toxic cleaner and deodorizer without any need to add anything…
- Keep out of your eyes. If you do get an EO solution in your eyes, rinse with tap water and seek medical advice.
- Do not consume. This product is intended for use as an external cleaning product. If ingested seek appropriate medical advice. If you use this to clean food, rinse for 2 minutes before consuming.
- When in use, you can generate up to 3 cycles. Transfer any remaining solution to a sprayer (up to 4 days of use) or dispose of it down the drain.
- Make a fresh batch of the solution if you want to continue to use the blaster beyond 3 cycles.
- Do not spray electrical appliances that may cause a short circuit
- Do not lean the Egret EO blaster more than 45 degrees when filled with liquid (exaggerated lean may cause a short circuit and void the warranty)
- Do not exceed Sg (1 TSP) of salt per 800ml of water
- Do not immerse any portion of the heat-generating unit in water including the tailpiece where you plug in the USB
- Avoid exposure to high temperatures and direct sunlight
- Charge in a dry area. Do not charge in a moist environment
- Not intended for use by children
- Do not disassemble the product, this may void warranty
- Avoid continuous use beyond 3 cycles, allow time for the unit to cool after no more than 3 cycles. Create a new solution after 3 cycles and allow 1 hour. break
- Do not be subject to freezing temperatures
- Before storage, press the trigger to expel residual water. Store empty.
Troubleshooting
No electrolysis
- Check that the battery is fully charged (the circle is white)
- If the electrode screw is loose, unscrew the water container and tighten the electrode screw (check our troubleshooting videos]
Egret’s Functions
Switch on Egret to electrolyze water and generate safe, nontoxic hypochlorous
acid.
Applications
-
One Cycle – Cleaning of toys, pet areas, kitchen appliances, and vehicles: 800ml of tap water and 5gm (1 tsp.) salt Electrolysis cycle time 3 minutes (one cycle) Effective available chlorine FAC 60-80ppm
-
Two Cycles – Sanitation of toilet, air conditioner, washing machines, shoe cabinets, mold, stains: 800ml of tap water and 5gm (1 tsp.) salt
Electrolysis cycle time 6 minutes (two cycles) Effective available chlorine FAC 100 – 200ppm -
Three Cycles – deodorizing and cleaning of sports equipment, pet betting, hard surface cleaning 800ml of tap water and 5gm (1tsp.) salt Electrolysis cycle time 9 minutes (three cycles)
For warranty service, please contact your local distributor.
www.egretlab.ca
Made in China. @2020 All Rights Reserved.