LUXPRO LP32UV UV Illuminator Light 32-LED User Manual
- June 5, 2024
- LUXPRO
Table of Contents
LUXPRO LP32UV UV Illuminator Light 32-LED
Features
- Durable aluminum construction
- 32 UV LED
- Enhanced rubber grip
- High quality wrist lanyard
- Tactical tail cap button
- Ultraviolet flashlight
Operation Instructions
On/Off: Press the button to activate. Press again to turn it off.
Usage and Maintenance
Battery Replacement: In a dry environment, unscrew the tailcap by turning
counterclockwise. Remove the battery case from the flashlight by tipping the
bottom of the light downward until it slides free from the tube. With the
battery case now out of the flashlight, remove the batteries from the case.
Insert new batteries into the case according to the (+/-) symbols found on the
case. Insert the battery case into the light according to the directional
arrow on the outside of the case. Carefully reinstall the tailcap by pressing
lightly while turning clockwise until tight.
Care Instructions: If you know it’s going to be a while between uses, we
suggest removing batteries from your light and storing your gear in a dry,
protected place.
Product Warranty
Limited Lifetime Warranty against manufacturer’s defects. For warranty claims contact LuxPro by calling 801-553-8886 or sending an email to info@simpleprod-ucts.com.
14725 S Porter Rockwell Blvd Ste C Bluffdale, UT 84065