Brigii MX30 Cordless Pet Hair Vacuum User Guide
- June 15, 2024
- brigii
Table of Contents
Brigii MX30 Cordless Pet Hair Vacuum
OVERVIEW
Notice: Do not use the vacuum while charging. Please disconnect the
charging cable before using it.
Please fully charge before first use!
OPERATION AND DISPLAY STATUS
| Operation | Vacuum status | Indicator Status |
|---|
Press the power button
| Working properly| Solid white light
Low power| Red light flashes and stops blinking
Press the power button| Stop working| The indicator went out
Charging
| Charging| Red light blinking
Fully charged| Solid white light
TROUBLESHOOTING
| Condition | Reasons | Solutions |
|---|
Won’t charge
| Not connecting the power supply correctly| Please check the power supply and charger block and connect them correctly
Overheating of the vacuum or surrounding
Low-temperature of the vacuum or surrounding
| Please stop charging, let it sit for 15 minutes and charge it again after reaching room temperature
（Please use, store and charge it within an ambient temperature of 0°C(32°F)-40°C(104°F)）
Won’t turn on
| Out of power| Please charge before use
Cable connected
| The vacuum cannot be turned when the cable is connected to the power supply.
Blockage caused thermal cut-out| Please follow the instructions to clean the
dust cup and filter before use.
Won’t turn on
|
Overheating of the vacuum or surrounding
Low-temperature of the vacuum or surrounding
| Please stop using it, let it sit for 15 minutes and charge it again after
reaching room temperature (Please use, store and charge within an ambient
temperature of 0°C(32°F)-40°C(104°F))
---|---|---
Abnormal Noise when using| Incorrect filters were installed and foreign
objects sucked| Turn off the power, try to take out the objects and install
the filter correctly
Suction decreased
| The dust cup is full
Air inlet or filter be clogged
| Clean the air inlet and dust cup on time according to the instructions or
change the filter on time
Low battery| Please fully charge before use
- Please contact the Brigi customer support team, if your problem still cannot be solved.
- Official website: www.brigii.com
- Email: support@brigii.com
CLEANING AND MAINTENANCE
- The suction power and battery life may decrease if the filter is clogged, please clean the filter in time or change the filter. A good rule of thumb is to change your high-performance filter every 3 months.
- Do not wash the motor housing.
- Rotate the dust cup in the direction of the arrow to open it and remove the filter assembly. Then disassemble the HEPA filter.
- Wash the filters and dust cup, air-dry them completely and reassemble the filters.
CONTACT
- Please contact the Brigi customer support team, if your problem still cannot be solved.
- Official website: www.brigii.com.
- Email: support@brigii.com.
- www.Brigii.com.