Brigii PF01 Desk and Clip Fan User Manual
- June 15, 2024
- brigii
Table of Contents
PF01 Desk and Clip Fan
User Manual
PF01 Desk and Clip Fan
INTENDED USE
This product is intended to circulate the air in indoor living spaces. This
product is not intended for commercial or industrial use. The manufacturer
assumes no responsibility for damage or injury due to unauthorized use or
product modification. Failure to follow these directions will void the product
warranty. If you have any questions, please feel free to send an email to
support@brigii.com. We will try our best to solve
the problems as soon as possible.
WARNINGS
- Please charge the fan by 5V Adapter/personal pc/portable power or other 5V input devices. Do not use adapters with a voltage higher or lower than 5V.
- Do not put fingers into the fan when it is working.
- Fan blades will be at high-speed rotation while working. Don’t put anything into the fan, otherwise, it may be seriously damaged.
- lf not use for a long time, please charge the fan to 75% battery capacity for better storage.
- This appliance is not intended for use by infirm persons with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge (including young children), unless they have been given supervision or instruction by a responsible person concerning use of the appliance to ensure that they can use it safely.
INSTRUCTION
-
Start the fan by pressing the On/Off button, the LED indicator will dispaly speed 1. To switch between the four different speeds, press the On/Off button repeatedly until you reach the desired speed. After six seconds, the LED indicator will change to display the battery capacity.
Long press the On/Off button to turn off the fan. -
Please use 5V adapter(not include) or other 5V devices to charge the fan. Do not use adapters with a voltage higher or lower than 5V. When you charger the fan, its LED indicator lights up and constantly flashes, and the light keeps on after fully charged.
PRODUCT SPECIFICATION
| Model Name | PFOl |
|---|---|
| Input | 5V/0.8A |
| Max Power | 4W |
| Speed | 4 speed |
| Product Dimensions | 133x132197mm |
CLEANING AND MAINTENANCE
- Turn the fan off and unplug it before cleaning.
- Use only a soft cloth or cotton swab to gently wipe the fan clean.
- To clean between the grilles, we recommend using a pipe cleaner, vacuum cleaner, flexible dustwand or compressed air to gently remove the dust.
- DO NOT immerse the fan in water and never allow water to drip into the motor housing.
- DO NOT use gasoline, paint thinner or other chemicals to clean the fan.