CFMOTO 2753 Michigan Road Rear Windshield Instruction Manual

CFMOTO 2753 Michigan Road Rear Windshield

Product Information

Specifications:

• Product Name: Rear Windshield for CFMOTO UFORCE 1000
• Manufacturer: SuperATV
• Compatibility: CFMOTO UFORCE 1000

Product Usage Instructions

Installation Instructions:

1. SuperATV does not recommend keeping the windshield installed while transporting on an open-air trailer. Remove or secure with straps.
2. This item is not returnable if the protective film has been removed.
3. Test fit the windshield to the cage to confirm fitment before removing the film.
4. Do not discard the packaging until the product has been successfully installed.

Cleaning and Maintenance:

1. Clean the windshield using a mild detergent, such as dish soap, mixed with water. Alternatively, alcohol or hand washing soap can also be used.
2. Rinse the windshield thoroughly with clean water.
3. To prevent water spots, use a chamois to blot the windshield dry.

Assembly Instructions:

Step 1: Install Foam to Channel Brackets:

1. Attach the foam to the channel brackets in the location shown. Set aside.

Step 2: Install Bulb Seal:

1. To ease installation, soak the bulb seal in hot water before cutting or installing to increase flexibility.
2. Install one continuous piece of bulb seal with the bulb portion facing towards the vehicle.

Step 3: Install Channel Brackets to Windshield:

1. Attach the channel brackets to the windshield using the provided hardware. Do not tighten the hardware.
2. Use 12 M6 x 25mm bolts, sealing washers, and nuts for this step.
3. Ensure that the rubber faces the plastic when installing the sealing washers.

Step 4: Install Foam to Cage:

1. Remove the stock hardware shown.
2. Install the foam to the cage in the locations shown.

Step 5: Install Top Brackets:

1. Install the top brackets to the frame using the stock hardware.
2. Tighten the hardware securely.

Step 6: Secure Windshield:

1. Secure the windshield to the top brackets using the provided hardware.
2. Use 4 M6 x 25mm bolts, sealing washers, and nuts for this step.
3. Tighten all hardware securely.
4. Ensure that the rubber faces the plastic when installing the sealing washers.
5. The channel brackets should be in the position shown.

FAQ:

• Q: Can I transport my vehicle with the windshield installed?
  A: SuperATV does not recommend keeping the windshield installed while transporting on an open-air trailer. It is advised to remove or secure it with straps.

• Q: Can I return the product if the protective film has been removed?
  A: No, the product is not returnable if the protective film has been removed. It is recommended to test fit the windshield to the cage before removing the film.

• Q: How should I clean the windshield?
  A: You can clean the windshield using a mild detergent, such as dish soap, mixed with water. Alternatively, alcohol or hand washing soap can also be used. Rinse it thoroughly with clean water and use a chamois to blot it dry to prevent water spots.

• Q: Where can I get help with the installation?
  A: For installation assistance, you can read the instructions and view illustrations provided in the manual. You can also contact SuperATV via email at [email protected] or call 1-855-743-3427 during their customer service hours: 8:00am – 8:00pm EST from Monday to Thursday, 8:00am – 7:00pm EST on Fridays, and 9:00am – 2:00pm EST on Saturdays.

• Q: Can I use power tools for assembly?
  A: No, it is recommended to use hand tools only when assembling the product. Power tools should not be used.

• Q: What is the product’s model number?
  A: The product’s model number is IN-RWS-CF-UF1000.

INSTALLATION INSTRUCTIONS

Rear Windshield: for CFMOTO UFORCE 1000

• SuperATV does not recommend keeping Windshield installed while transporting on an open air trailer. Remove or secure with straps.
• This item is not returnable if the protective film has been removed.
• Test fit to the cage to confirm fitment before removing film.
• Do not discard packaging until product has been successfully installed.

Windshield Cleaning:

• Do not use Rain-X®, Plexus® or any other protector, wax, or polish.
• Do not use window cleaning fluids (Windex, 409, etc) or any solvents (gasoline, denatured alcohol, acetone, etc).
• Never use abrasive cleaners, abrasive pads, or gritty cloths.
• Do not use a windshield wiper blade or install a motorized windshield wiper
• Never use razor blades, scrapers, squeegees, brushes, etc.

1. Thoroughly rinse Windshield to float off dirt and mud.
2. Using a soft cloth, or microfiber cloth, clean Windshield with warm water and a gentle detergent. Baby shampoo, rubbing alcohol, or hand washing soap can also be used.
3. To prevent water spots, use a chamois to blot Windshield dry.

Need help with your installation?

[email protected]
1-855-743-3427
www.superatv.com
8:00am – 8:00pm EST M-Th 8:00am – 7:00pm EST Friday 9:00am – 2:00pm EST Saturday

Read instructions and view illustrations before beginning.

Liability Statement

• SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact SuperATV® to verify that they will work together.
• Although SuperATV® has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times.
• By purchasing and installing SuperATV® products, user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®.
• The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.
• SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®.
• SuperATV® parts and products are not warrantied if item was not installed properly, misused, or modified.
• Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
• The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.

Install Foam to Channel Brackets in location shown. Set aside.

• To ease installation, soak Seal in hot water before cutting or installing to increase flexibility.
• Install Channel Brackets to Windshield with hardware shown. Do not tighten hardware.

References

• superatv.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>