CFMOTO 106415 Plow Front Mount Installation Guide
- June 12, 2024
- CFMOTO
Table of Contents
UFORCE 600
Plow Mount PART #106415
Installation Guide
Kit Components:
| Item # | Qty. | Description |
|---|---|---|
| 1 | 1 | Plow Mount |
| 2 | 2 | Bolt Plate |
| 3 | 1 | Hardware Kit (HK-415) |
| 3.1 | 4 | 3/8”-16 x 2.75 Hex Flange Bolt |
| 3.2 | 2 | M10-1.25 x 35 Hex Flange Bolt |
INSTALLATION INSTRUCTIONS
Note: Make sure all hardware needed to complete this mount is in the package. Thoroughly read through and understand the instructions before installing.
| 
| 
---|---|---
- Remove OEM bolts (A) from front bumper as shown in Figure 1.
- Set plow mount (1) in place and fasten to front bumper using bolts (3.2) as shown in Figure 2.
- Using plow mount (1) as a template, drill through skid plate on driver side of the machine using a 13/32” drill bit as shown in Figure 2.
- Place bolt plates (2) above frame rale on both passenger side and driver side of the machine and secure rear of plow mount (1) to bolt plate (2) using bolts (3.1) as shown in Figure 2 & 3.
- Tighten all hardware evenly.
©2022 Copyright Kappers Fabricating, Inc.
All rights reserved
Read User Manual Online (PDF format)
Loading......