i-box Dawn Beside Alarm Clock with Wireless Charging User Guide

: June 15, 2024
: i-box

Table of Contents

Caring for your Alarm Clock
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**i-box Dawn Beside Alarm Clock with Wireless Charging User Guide

**

Caring for your Alarm Clock

Important Safety Information

Important – Please read these instructions fully before installing or operating your speaker.

Keep away from flame sources such as lighted candles.

Do not expose to dripping or splashed fluids. Objects filled with liquids, such as vases, must not be placed close to the speaker.

The unit should not be exposed to direct sunlight, very high or low temperature, moisture, vibrations, strong magnetic fields, high frequencies and dusty environments.

Do not place the product in enclosed bookcases or racks without proper ventilation. Ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc

Never attempt to insert wires, pins or other such objects into the vents or openings of the unit.

Do not disassemble or modify the alarm clock, there are no user serviceable parts.

If the alarm clock is damaged in anyway or malfunctions do not use. Consult a qualified service engineer.

Do not dispose of this product with household waste at the end of its life cycle; hand it over to a collection centre for the recycling of electrical and electronic appliances. CEF

Contents

Safety information
Safety information
Getting to know your wireless charging alarm clock
Box contents Controls & features
Getting started
Setting the clock Setting the alarm(s) Enabling/Disabling the alarm Snoozing the alarm(s) Controlling the dimmer Bluetooth connection Bluetooth operation FM Radio operation FM Radio memory Sleep mode Wireless charging USB Charging
Other Information
Specifications Disclaimer Technical support Declaration of conformity

BOX Contents

i-box Dawn Bedside alarm clock with wireless charging

DC power adaptor

Getting to know your alarm clock Before you get started please be sure to read through the safety information on pages 2-3.

Controls & Features

Wireless charging location
Previous song/ Down button
Play/Pause
Next song/Up button
Snooze/Sleep/Dimmer
Volume down/ Alarm set
Volume up/Clock Key
Stand by mode/ Function key

Controls & Features

USB Charging port
DC adaptor jack
Speakers
Wire Antenna

Getting to know your alarm clock
Controls & Features

Back up battery door

Controls & Features

Time display
Alarm indicators
PM Indicator
FM Indicator
Bluetooth Indicator
Wireless charging indicator

**Power Connection

**

Clock setting

Plug in the DC 5V adaptor, the unit will display the default time 0:00.
Press and hold (7) for 1-2 seconds, the display will then show 24hr.
Press (2) or (4) to switch between 24hr and 12hr time.
Press (7) again to set the hour.
Press (2) or (4) to change the hour.
Press (7) to set the minute(s.
Press 44 (2) or (4) to change the minute(s).
Press (7) to finish once the time has been set.

Alarm setting

In standby mode (or clock mode), press and hold (6) for 3 seconds, the unit will then allow you to set the first alarm.
Press (2) or (4) to select the AL1 hour.
Press (6) and (2/4) to select the AL1 minute(s).
Press (6) and (2/4) again to select the AL1 source (beep or FM).
Press 4 (6) and (2/4) to select the AL2 hour.
Press (6) and (2/4) to select the AL2 minute(s).
Press (6) and (2/4) again to select the AL2 source (beep or FM).
Press (6) again once the alarm(s) has been set to exit.

Alarm enable/disable

In standby mode, press (6) to enable the alarm.
The alarm will cycle through: AL1/AL2/AL1 and AL2/off.

Stop & Snooze alarm

When the alarm sounds, press to delay the alarm for 9 minutes. (5, Snooze)

Dimmer

Press (5, Snooze) to select the brightness of the display

Bluetooth connecting & disconnecting

Press (8) to cycle through the modes until you get to Bluetooth mode.
Once in Bluetooth mode the display will flash while searching for the last connected device.
If the most recent connected device can not be found, the i-box Dawn will search for previous devices.
Select i-box Dawn from the Bluetooth list on your device to start pairing.
Once pairing is successful, the Bluetooth display will stop flashing and a beep will sound.
Press MI/BT (3) for 3 seconds to disconnect your device from the i-box Dawn. A beep will sound to confirm the device has been disconnected successfully. The i-box Dawn will now be in pairing mode again, allowing you to pair a new device.
Long press (8) to return to clock mode when you are finished.

Bluetooth play operation

Press +/- (6/7) to increase or decrease the volume level (0-15). .
Press (2) to play the previous song or press .
Press I/BT (3) to play or pause the song. . (4) to select the next song.

FM radio operation

Press (8) to cycle through the modes until you get to FM radio mode.
Press (2) or (4) to change the FM station.
Press and hold 4 (2) or (4) to search for the next FM station automatically.
Press +/- (6/7) to increase or decrease the volume level.
Long press (8) to return to clock mode when you are finished.

FM radio memory
There are 10 preset spaces available for you to store your favourite stations.

Press (2) or (4) to select the FM station you would like to store.
Press and hold II/BT (3) to bring up the preset menu.
Press (2) or (4) to cycle through the 10 preset spaces available.
Press I/BT (3) once you have selected the preset space for your chosen FM. station to save the preset.
Press I/BT (3) to access the stored presets.
To access your saved preset, press (2) or (4) until you get to your chosen preset then wait 5 seconds for the FM station to start playing.

Sleep mode

Sleep Mode lets you fall asleep while listening to Bluetooth or FM music for the set sleep duration then turns the music off. In FM radio or Bluetooth mode, press and hold (5, Snooze) for 2 seconds. The i-box Dawn will display the sleep timer. Press (5, Snooze) to cycle through the sleep time options. The available options are: 120 mins / 90 mins / 60 mins/ 30 mins / 15 mins / 10 mins / 5 mins / sleep timer off.

Charging your phone

You can charge your phone wirelessly or by using the available USB charging port on the back of the i-box Dawn. Please do not use both charging methods at the same time for one device (charging cable not included).

Wireless charging

Place your smartphone centrally on top of the i-box Dawn as shown.
The battery power of your device is shown via your devices display.

When the phone is being charged wirelessly, the wireless charging indicator (19) will light up on the display.
For maximum charging efficiency, the phone must be aligned with the centre of the charging area (1).
Phones that are capable of wireless charging may need to be placed slightly off centre. The built-in wireless receiver may not be centred inside the phone. This varies by brand/model.

There may be interference to the radio reception if using wireless charging at the same time.

If problems occur when charging or if charging does not start:

Remove your smartphone from its case if the thickness of the case exceeds 5mm or if it cotains metal.
Check if your smartphone is placed on top of the i-box Dawn correctly as shown.
The charging time varies depending on the charging capacity of the battery and its current residual capacity.
The components may heat up during the charging process. They will slowly cool down again after the charging process.

USB charging port

Connect an external device via a USB cable to the USB charging port (9) on the back of the i-box Dawn to charge the device.
The battery power of your device is shown via your devices display.
- . There may be some radio interference while charging.
- Please charge your device using only one charging method at any one time.
- Please do not charge the same device using the wireless charging function and USB charging port (9) at the same time.

Backup batteries

The i-box Dawn has a backup battery feature where 2x AAA batteries (not included) will allow it to remember time and alarm settings if unplugged or power is cut.

Specifications

Power Input: 5V-3.5A USB Output: 5V-1A Speaker Output: 6 Watt RMS

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply to your particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Technical support

For further help, advice, information or live chat visit www.iboxstyle.com