IDO 970 Reflect Top Instruction Manual
- June 15, 2024
- iDO
Table of Contents
IDO 970 Reflect Top
Product Information
Specifications
- Model Number: 970.830.00.0(01)
- Manufacturer: Geberit International AG
- Address: Schachenstrasse 77, CH-8645 Jona
- Email: documentation@geberit.com
- Website: www.geberit.com
Product Usage Instructions
Installation
Before starting the installation process, please ensure that you have read
and understood the entire user manual. Follow the steps below to properly
install the product:
- Disconnect the power supply before connecting any cables to prevent electric shock.
- Choose a suitable location for installation within defined protective areas.
- Ensure that appropriate safety measures are taken during installation.
- Check the bearing capacity of the wall where the product will be installed.
- Inspect the supplied fastening material and replace if necessary to ensure compatibility with the wall type.
- Follow the specific installation instructions provided in the user manual.
Product Safety
To ensure safe usage of the product, please keep the following safety
precautions in mind:
- Only trained electrically skilled persons are permitted to set up the electrical connection.
- Avoid installing the product at heights to prevent serious injuries.
- Always use appropriate safety measures and protective equipment during installation.
Maintenance
Regular maintenance is necessary to ensure the optimal performance and
longevity of the product. Follow these maintenance guidelines:
- Refer to the user manual for specific maintenance instructions.
- Regularly clean the product using mild soap and water.
- Avoid using abrasive materials or harsh chemicals that may damage the product.
- Periodically inspect the product for any signs of damage or wear. If any issues are found, contact the manufacturer for assistance.
Frequently Asked Questions (FAQ)
-
Q: Can I install the product myself, or do I need professional assistance?
A: Only trained electrically skilled persons are permitted to set up the electrical connection. If you are not familiar with electrical work, it is recommended to seek professional assistance. -
Q: Is it necessary to disconnect the power supply before connecting the cables?
A: Yes, it is crucial to disconnect the power supply before connecting any cables to prevent electric shock. -
Q: How do I check the bearing capacity of the wall?
A: Before installation, it is important to check the wall’s bearing capacity. You can consult a structural engineer or use appropriate tools to assess the wall’s strength and suitability for installation. -
Q: Can I use my own fastening material instead of the supplied one?
A: It is recommended to use the supplied fastening material as it has been specifically chosen for compatibility with the product and wall type. However, if necessary, you can replace the fastening material with a suitable alternative after ensuring its compatibility.
SAFETY INSTRUCTION
DANGER-Electric shock
Incorrect installation can lead to death or serious injuries.
- Only trained electrically skilled persons are permitted to set up the electrical connection.
- Disconnect the power supply before connecting the cables.
- Only carry out the installation within the defined protective areas and take the appropriate safety measures.
DANGER-Incorrect installation
If the product falls from a height it can lead to serious injuries.
- Check the bearing capacity of the wall before installation.
- Before installation, check whether the supplied fastening material is suitable for the type of wall in question. If necessary, replace the fastening material.
INSTALLATION INSTRUCTION
Geberit International AG
Schachenstrasse 77, CH-8645 Jona
documentation@geberit.com
www.geberit.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>