BLAVOR PN-W12 Qi Solar Power Bank User Manual
- June 6, 2024
- BLAVOR
Table of Contents
Qi Solar Power Bank
User Manual
PN – W12
Qi Solar Power Bank
PRODUCT DETAILS
Solid red- device standby status; Flashing red-foreign object detection
5W wireless charging
7.5W 10W wireless charging
- Solar Panel
- Battery Status Indicator
- Power Button
- Solar Charging Indicator
- Led Flashlight
- Micro USB Input
- Type C Bidirectional PD Fast Charging
- QC3.0 USB Output
- 5V 3A USB Output
- Hanger
- Compass kit
- Wireless Charging Area
Thank you for choosing BLAVOR Wireless Solar Charging Power Bank. Here’s the instruction for your better experience.
PRODUCT PARAMETERS
20000mAh Wireless Solar Charging Power Bank
| Micro USB quick charge input port | DC 5V/2.4A 9V/2A |
|---|---|
| Type- C quick charge input/output port | DC 5V/2.4A 9V/2A |
| USB quick charge output port 1 | DC 5V/3A 9V/2A 12V/1.5A |
| USB quick charge output port 2 | DC 5V/3A |
| Wireless charging output | 5W 7.5W lOW |
| Solar panel output | 300mA(under 25000LUX) |
| Battery capacity | 20000mAh |
| Battery type | polymer lithium battery |
| Product weight | 0.5 KG |
Package Include:
1Pack BLAVOR Wireless solar power bank
1Pack USB Cable
1Pack Instruction
1 Pack Carabiner
1*Pack Thank-you note
Product Specifications:
- Exclusive design, fashionable and beautiful.
- Original A-class polymer batteries, safe and stable.
- High capacity wireless portable power bank, quick charging input and output.
- Wireless charging, 5W, 7.5W and 10W outputs, suitable for the Qi standard products.
- Solar charging, charge your devices at any time.
Instructions:
1. Turn on/Turn off:
Gently press the power switch, then the LED battery indicators and wireless
charging function are on.
If there is no charging devices, power bank will automatically shut down in 30
seconds.
2. How to charge the power bank:
Solar supply
Put the power bank under direct sunlight and sunlight will convert into
electricity to charge built-in lithium battery automatically (Strong
sunlight is advised).
Power supply
Connect the TYPE-C or USB input port and wall/car adapter USB port with a
cable. The blue LED indicators will be flickering while charging, and all
indicators on means the power bank has been fully charged. QC3.0/PD wall/car
adaptor will quick charge the power bank.
3.Charge mobile phones or other devices:
Cable charging
Turn on the power switch and the blue indicators are on. Plug two ends of the
cable into the power bank USB port and the devices.
QC 3.0 USB Output port and TYPE-C Bidirectional PD port support fast charging
for mobile phones and devices with fast charging function.
Wireless charging
Turn on the power switch and the wireless charging indicator in the back is
on. Put your mobile phone in the wireless charging area and the charging will
be on.
If you normally use a protective case for your phone, please make sure that
your phone case is not made of metal and the suitable thickness is less than
6mm.
Three indicator lights below the wireless charging area
-
Red Indicator light:
Soild red- wireless standby status; Flashing red-foreign object detection. -
Blue Indicator light:
5W wireless charging. -
Green Indicator light:
• 7.5W 10W wireless charging.
LED flashlight function:
- First, press the power switch for about 3 seconds to turn on the LED flashlight.
- Second, short press the power switch again and “flashlight mode” flashlight.
- turns to “SOS mode” flash.
- Third, to accelerate the flicker frequency of SOS mode, short press power switch a third time, and SOS blasting flash mode is on.
- Then, short press power switch a fourth time and the LED light is off.
Warning:
- This power bank is for 5V/2.4A 9V/2A devices. Devices beyond the specifications may be damaged.
- Please do not disassemble the power bank.
- Keep dry and keep away from fire. Please do not use chemicals to clean the power bank.
- please do not charge in high temperature. Suggested temperature rang:- 10°C-40°C.
- If not intend to use the power bank for a long time, please charge it at least every three months.
- Please do not use until fully charged and do not charge mobile phones while being charged.
Warranties and after-sales service:
(1) Every BLAVOR product is provided with at least 12 months of warranty and a
lifelong technical support.
(2) Within 30 days from the date of purchase, products in good packaging and
without damage can be returned and fully refunded. Please noted that customers
will bear the shipping fee if products have no quality problems.
(3) A free exchange for products having quality problems within 12 month.
(4) If you are not 100% satisfied with our products, please feel free to
contact our customer service at
support@blavor.com. We attach great
importance to customer feedback and will get back to you within 24 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>