NEWSKILL KAIDAN Professional Reinforced Gaming Chair Instruction Manual
- June 15, 2024
- NEWSKILL
Table of Contents
**NEWSKILL KAIDAN Professional Reinforced Gaming Chair Instruction Manual
**
Safety Instructions
A) We recommend that the chair be assembled with the help of a second
person.
B) To avoid any possibility of the chair tipping over, ensure that the
weight on the chair is evenly distributed.
C) Ensure you keep your feet on the ground at all times and do not press
your head against the backrest while fully reclining in the chair. Do not sit
on the armrests.
D) Do not place heavy objects on the chair and do not use it as a ladder.
E) When adjusting the backrest, ensure your fingers are out of the way.
F) To avoid damage, never pull hard and fast on the handles.
G) Avoid direct sunlight to ensure plastic components do not become
brittle.
H) Do not use aggressive cleaning agents to clean the chair.
I ) The chair can be used for both work and rest. The higher backrest 1
fully supports the spinal column, while the chair mechanism and gas lift
piston allows users to vary chair height to their office and/or computer desk.
J) Attention! Only instructed personnel should exchange or work on the
seat adjustment elements.
K) We recommend the chair be used on a standard indoor floor surface.
L) Ensure that all parts are intact and properly installed. Incorrect
installation may result in injury.
M) Damaged parts can affect safety and function. The item should not be
used if parts are damaged or missing.
N) Never stand on the chair, use as a ladder, climbing aid or the like.
0) Keep small parts and packaging away from children, there is a risk of
suffocation!
P) The chair is not a children’s toy. Keep babies and toddlers away from
the swivel chair.
Q) With sensitive hard floors (e.g. laminate, cork, parquet) use a
commercially available floor protection mat.
R) Please always place yourself at the back of the seat base to avoid
tipping over forward. The manufacturer assumes no liability for direct damage
or consequential damage resulting from improper use or non-observance of
safety instructions.
S) The incremental deterioration caused by normal wear and tear is not
covered by guarantee.
T) The chair supports up to 120 kg.
Warning!
Only trained personnel may replace or repair components for height adjustment of seating furniture with energy storage. To avoid damage property or personal injury, please read the enclosed manual thoroughly before assembling!
COMPONENTS
-
Seat
-
Backrest
-
Head Support Cushion
-
Lumbar Support Cushion
-
Mechanism
-
Gas Lift
-
Castors X5
-
Gas Lift Cover
-
Side Covers
-
Base
-
Hexkey
-
M8x20mm Screws X8
M8x25mm Screws X4
-
M5x12mm Screws X2
-
Small Side Cover X2
-
Screw Washers X4
-
RubberGasketx4
MOUNTING STEPS
-
Push and twist the wheels into the star base. And place the cylinder cover over the gas lift.
-
M8x20mm Screws
-
RubberGasketx4
-
-
Align the butterfly mechanism with the screw holes at the bottom of the seat as shown in image
The Rubber Gasket
Rubber gaskets can reduce the noise when the chair is in motion. You can
choose whether to install it.
-
Attache the seats to the base
-
Fasten the backrest with provided screws.
-
Fasten the side covers, and put the small side cover on
-
Finish
ATTENTION
- Verify all parts before assembly.
- The pictures in this guide may not look like your chair, but the instruction guide is the same regardless of model.
- Do not use the chair unless all the bolts and screws are tight.
- At least every six months check all botls and scres to ensure they are tight.
- Don not use this chair as a step stool/ladder.
GOT QUESTIONS?