ecozy E80S Sunrise Alarm Clock for Heavy Sleepers User Manual

: June 15, 2024
: ecozy

ecozy E80S Sunrise Alarm Clock for Heavy Sleepers

Please read this manual carefully before use and keep it for future reference.

SAFETY INSTRUCTIONS

To reduce the risk of fire, electric shock, or injury, please read these instructions before use.

This product is only intended for household use, including similar use in hotels.
Please place this product on a stable, level, and non-slippery surface.
Do not use this product in wet surroundings, such as in the bathroom, near a shower or a swimming pool.
Do not let the water run into the product or spill any water onto the product.
Make sure the power adapter does not get wet when in use.
Only use the ORIGINAL USB cable provided.
Do not use this product as a means of reducing your sleeping time. This product aims to help you wake up more easily instead of diminishing your need for sleep.

MAINTENANCE AND CARE

Please clean the product with a dry and soft cloth.
Do not use abrasive cleaning agents, pads, or cleaning solvents like alcohol, acetone, etc., as this might damage the surface of the product.
If the product will not be used for an extended period of time, please unplug the power adapter f rom the socket, then store the product in a safe and dry place where it will not be crushed, banged, or subject to damage.

WHAT’S INCLUDED

Wake-Up Light
USB Cable
User Manual

PRODUCT OVERVIEW

Alarm 2
Alarm 1
Down
LED Light
up
Snooze
Volume+
FM Radio
Volume
Sleep Aid
Time Setup/LED Display Mode
LED Display
USB Output
FM Antenna
Micro USB Input
Speaker
Button Cell Compartment

GET STARTED

Remove the Insulation Film from the Button Cell Compartment at the bottom.
Connect the Wake-up Light to power.

Important:
This product has no power on/off button, and it will be on once you connect it to power. To disconnect power, please unplug the product.
Loosen the tie that wraps the FM Antenna, then unroll the wire for receiving strong signals when turning on the FM Radio.

OPERATE VIA THE DEVICE

Note:
The Wake-up Light will automatically save the current setting and exit from setting mode if the operation is not resumed within 15s.

Time

Before the first use, please set the time.

Step 1:
Press and hold for 2 seconds until the Hour starts to flash on the LED display.

Step 2:
Press to change the Hour, then press to confirm and switch to Minute.

Step 3:
Press to change the Minute, then press to confirm and start to set the Clock Format.

Tip:
If the 12-hour clock format is selected, PM or AM will be displayed accordingly.

Brightness of the LED Display

Press to toggle the brightness of the LED Display among Day Mode , Night Mode and OFF.

Day Mode indicates that the brightness level of the LED Display will always be the brightest even at night.

Night Mode indicates that the brightness level of the LED Display will always be the lowest.

OFF means turning off the LED display.

Alarms

You could set Alarm 1 and Alarm 2 with the wake-up light and via the EcozyHome app, while Alarm 3 and Alarm 4 could be only set via the app EcozyHome. We will take setting Alarm 1 as an example to guide you how to set an alarm.

Step 1:
Press and hold for 2 seconds until the icon and the Hour start to flash on the LED display.

Step 2:
Press to change the Hour, then press to confirm and switch to Minute.

Step 3:
Press to change the Minute, then press to confirm and start the Ringtone Setting.

Step 4:
Press to select your favorite ringtone for Alarm 1, then press to confirm and start the Volume Setting.

Tip :
S-00: Ringtone off
S-01 to S-07: Nature sounds
F-08: The last FM station you were tuned to before turning off the radio. If you prefer another station, please turn on the FM radio to search and select the one you like, then set the alarm again.

Step 5:
Press to adjust the ringtone volume, then press to confirm and start the Sunrise Light Setting.

Tip:
U-01 to U-16: Volume levels

Step 6:

Press to adjust the brightness level for the light, then press to confirm and start setting the sunrise time to turn on the light before the alarm rings.

Tip :
L-00: Light off
L-01 to L-20: Brightness levels
If you select L-00, there will be no sunrise light (but only ringtone) when Alarm 1 rings.

Step 7:
Press to select the sunrise time from 10, 20, 30, 40, 50 and 60 MIN, then press to confirm and complete all the settings for Alarm 1. Alarm 1 is on after setup.

Tip:
If you select 10 MIN and the alarm time is 7:00 AM, the light will be on at 6:50 AM and gradually become brighter. When the alarm rings at 7:00 AM, the brightness level of the light will reach the level you set at Step 6.

Notes:

To stop the alarm when it’s ringing, you can press any button from and buttons.
To permanently cancel Alarm !,just press the button when it’s not the alarm time; and so does Alarm 2.

Snooze

When the alarm rings, press to activate Snooze Mode to delay the alarm for 9 minutes.

Notes :

You can snooze up to 5 times.
Press any button from to manually stop the alarm.

FM Radio

Before the first use, please press and hold I for 2 seconds, and wait for the wake-up light to automatically search FM stations.
Available stations will be saved as P-01, P-02, etc., in sequence.

Step 1:
Press to turn on/off FM radio.

Step 2:
Press and hold to switch among the stations saved.

Step 3:
Press to adjust the volume.

Tip:
U-01 to U-16: Volume levels
Note: Please fully unwind the antenna and move it around until you receive the best reception.

Sleep Aid

Sleep Aid simulates the process of sunset, aiming to help you fall asleep easily. After it’s enabled, the sunset light will gradually dim, and the volume of the selected nature sound will decrease with time.

Step 1:
Press and hold for 2 seconds, then press to select a timer from 10 MIN to 120 MIN.

Step 2:
Press to confirm your selection, then press to adjust the brightness level of the light.

Tip :
L-00: Light off
L-01 to L-20: Brightness levels

Step 3:
Press to confirm your selection, then press to select your favorite sound to help you sleep.

Tip:
S-00: Sound off
S-01 to S-07: Nature sounds
F-08: The last FM station you were tuned to before turning off the radio.
If you prefer another station, please turn on the FM radio to search and select the one you like, then set again.

Step 4:
Press to confirm your selection, then press to adjust the volume of the sound.

Step 5:
Press to confirm your selection and complete all the setting for Sleep Aid. Sleep Aid is enabled after setup.

Tip:

Press to disable Sleep Aid.
The first-time setting will be saved for future use.

Light

Warm Light

Step 1:
Press to turn on/off the Warm Light.

Step 2:
Press to adjust the brightness level.

Atmosphere Light

After turning on the Warm Light, double press to turn on the Atmosphere Light, and the color of the light will change automatically.

Double press again to start color selection manually.

Shortly press to change the color of the light one by one and 7 colors are available.

Double press again to get back to the Warm Light.

OPERATE VIA THE APP

App Downloading and Installation

Option 1:
Search for EcozyHome from App Store™/Google Play™, then download and install it on your mobile device.

Note:
Google Play™ is a trademark of Google Inc., and App Store™ is a trademark of Apple Inc.

Option 2:
Scan the QR codes below to download and install.

For iOS

|

For Android

---|---

Launch the App, register an account with a valid email address at your first use, then log in.

Note:
For a successful connection, please allow the App to use your WLAN & Cellular Data when running it.

Link the Light with the App

IMPORTANT :
For the wake-up light:

Make sure the wake-up light has been connected to power. For WiFi network:
Before connecting, please turn on location service/GPS on your phone and grant all the permissions required by the App.
Make sure your mobile device is connected to a 2.4GHz WiFi.
Make sure you’ve entered the correct WiFi name and password when connecting.
Make sure the wake-up light, your phone and your router are close enough when connecting.

WiFi Indicator on the LED Display

Flashing	Ready for WiFi Connection
Solid	WiFi Connected

Tip:
If there is no connection after the WiFi indicator flashes for 30 minutes, the indicator would stop flashing automatically.

Auto Search

CD Press and hold on the wake-up light for about 5 seconds until the WiFi Indicator on the LED display keeps flashing. Turning on the Bluetooth function of your mobile device is a must.
Launch the App, and tap Add Device.
Tap Connect after your device is displayed on the page.
Select your router’s WiFi and enter the correct password; tap Confirm.
Connecting.
Connected The WiFi Indicator on the LED display will turn solid on.

Add Manually

Press and hold on the wake-up light for about 5 seconds until the WiFi Indicator on the LED display flashes slowly.
Launch the App, and tap Add Device.
Tap wake-up light.
Select your router’s WiFi and enter the correct password; tap Confirm.
Check the box and tap Next.
Tap Go to Settings, then connect to the WiFi of ECOZY-SL-****. (For iOS Device)

Tap Connect, then tap the WiFi of ECOZY-SL-**** on the pop-up window. (For Android Device)

Get back to the EcozyHome app.
Connecting.
Connected. The WiFi Indicator on the LED display will turn solid on.

CONTROL THE LIGHT WITH AMAZON ALEXA

Important:

Make sure the wake-up light has been connected to power.
You have connected the wake-up light to the EcozyHome App.
Make sure you’ve installed the Alexa App on your mobile device.
Make sure the WiFi connection is stable.

Step 1:
Log in to the Alexa App with your Amazon account, tap and then select Skills & Games.

Step 2:
Search and select EcozyHome, then enable it by tapping ENABLE TO USE.

Step 3:
Agree and link your EcozyHome account with Alexa.

Step 4:
Tap CLOSE to close the page, then tap DISCOVER DEVICES to discover the wake-up light which has
been connected in the EcozyHome App.

Step 5:
After the wake-up light is discovered, please tap CHOOSE DEVICE to set up your device.

Step 6:
Tap and allow the Alexa App to access the microphone of your mobile device.
Then you can say the following voice commands to your mobile device, the wake- up light will respond accordingly.

Alexa, turn on the light(or the name of your wake-up light if you have changed the device name).
Alexa, turn off the light.
Alexa, turn on the alarm one/two/three/four.
Alexa, turn off the alarm one/two/three/four.
Alexa, turn on the radio.
Alexa, turn off the radio.

Note:
If you have an Echo device at hand, please follow the steps below to make it available for voice
commands.

Step 1:
Log in to your Echo device with the same Amazon account for logging into the Alexa App.
Step 2:
Tap Devices at the bottom, then tap Echo & Alexa to show your Echo device. Then you can speak the voice commands mentioned above to your Echo device, and the wake-up light will respond accordingly as well.

CONTROL THE LIGHT WITH GOOGLE ASSISTANT

Important:

Make sure the wake-up light has been connected to power.
You have connected the wake-up light to the EcozyHome App.
Make sure you’ve installed the Google Home App on your mobile device.
Make sure the WiFi connection is stable.

Step 1: Launch the Google Home App, then follow the in-a pp instructions to set up your Google account

Step 2:
Tap Settings on the main page, then scroll down to the bottom to tap Works with Google.

Step 3:
Tap G_ on the upper right corner, then search and select EcozyHome.

Step 4:
Agree and link your EcozyHome account with Google Home.

Step 5:
Follow the instructions to set up the device to finish the settings.

Step 6:
Tap and allow Google Home to access the microphone on your mobile device.
Then you can say the following voice commands to your mobile device, and the wake-up light will respond accordingly.

OK Google, turn on the light(or the name of your wake-up light if you have changed the device name).
OK Google, turn off the light.
OK Google, turn on the alarm one/two/three/four.
OK Google, turn off the alarm one/two/three/four.
OK Google, turn on the radio.
OK Google, turn off the radio.

Note:
If you have a Google Home Speaker at hand, please follow the steps below to make it available for
voice commands.

Step 1:
Plug your Google Home Speaker into the socket.

Step 2:
Tap+ on the upper left corner of the main page, then select Set up device.

Step 3:
Tap New device, then tap Next to look for devices.

Step 4:
Follow the instructions of the Google Home App to connect your Google Home Speaker to WiFi.
Then you can speak the voice commands mentioned above to the speaker, and the wake-up light will respond accordingly as well.

TROUBLESHOOTING

This part summarizes the most common problems you could encounter with the wake-up Light. If you are unable to solve the problem with the information below, please feel free to contact support@ecozy.com for assistance.

Ql. The appliance does not work at all.

Make sure the appliance is properly connected to power.
Perhaps there is a power failure. Check if the power supply works by connecting another appliance.

Q2. What should I do when I cannot link the wake-up light with the App?

Check if the wake-up light is powered on.
Make sure your mobile device is connected to the 2.4GHz WiFi Network.
Make sure the password of your WiFi network entered in the EcozyHome App is correct when linking wake-up light.
Make sure the wake-up light is ready for WiFi connection.

Q3. Why did I fail to set the alarm clock to ring only on weekdays?

Please turn on the Network auto-time in the setting interface of the EcozyHome App, then you can set the alarm clock according to your needs.

Q4. The radio produces a crackling sound.

Perhaps the broadcast signal is weak, please fully unwind antenna and move it around until you receive the best reception.

Q5. How can I set the alarm 3 and alarm 4?

Alarm 3 & Alarm 4 can be only set on the EcozyHome App.

Q6. Could I completely turn off the time display?

Yes, you could turn it off in the setting interface on the EcozyHome App or by pressing the button on the wake-up light.

Q7. The light wakes up me too early.

Perhaps the light intensity level you set is not appropriate for you. You can try a lower light level.
Move the wake-up light further away from the bed.
The sunrise time duration you set is too long. Please select a shorter one.

Q8. The light wakes up me too late.

You can try to set a higher light intensity level.
Make sure the wake-up light is located at a height where the light is not blocked by your bed, comforter, pillow or any other things.
The sunrise time duration you set is too short. Please select a longer one.

Q9. The light reboots or flashes abnormally.

Please make sure your power adapters’ output voltage is SV and current is greater than or equal to 2A.

SPECIFICATIONS

Frequency Range	2412MHz-2472MHz
Transmit Power(EIRP)	16.99dBm

FCC CAUTION

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC WARNING

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.

The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from body to use the device is 20cm.

Customer Support

Thank you for choosing our product. If you have any questions, concerns of need any help, please contact us at support@ecozy.com
or call us via hotline
(443)991-8777 (UTC 14:00-22:00, Monday to Friday)