necchi 9999 Sewing and Embroidery Machine User Guide

necchi 9999 Sewing and Embroidery Machine

Specifications:

• Intended for household use only
• Sound pressure level at normal operation: smaller than 75dB(A)

Important Safety Instructions:

When using an electrical appliance, basic safety should always be followed, including the following:

1. Read all instructions before using this sewing machine.
2. DANGER – To reduce the risk of electric shock:
   • An appliance should never be left unattended when plugged in.
   • Always unplug this appliance from the electric outlet immediately after using and before cleaning.
3. WARNING – To reduce the risk of burns, fire,  electric shock, or injury to persons:
   • Read the instructions carefully before you use the machine.
   • Keep the instructions at a suitable place close to the machine and hand it over if you give the machine to a third party.
   • Use the machine only in dry locations.
   • Never leave the machine unattended with children or elderly people as they may not be able to estimate the risk.
   • This appliance can be used by children aged 8 years and above.
   • Never use the machine if the air vents are blocked, keep the air vents of the machine and the foot pedal free from dust, fuel, and leftovers.
   • The machine must only be used with a designated foot controller, to avoid a hazard. If the foot controller is damaged or broken, it must be replaced by the manufacturer its service agent or a similarly qualified person.
   • Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
   • Contact your local government for information regarding the collection systems available.
   • If electrical appliances are disposed of in landfills or dumps, hazardous materials may leak into the soil and groundwater, causing potential harm to the environment and human health.

Product Usage Instructions

1. To carry the sewing machine, hold the carrying handle with your hand, and support the sewing machine with the other hand.
2. Ensure the machine is placed on a stable surface before use.
3. Connect the machine to a suitable power outlet using the provided power cord.
4. Refer to the instruction manual for specific details on threading the needle, winding the bobbin, and selecting stitches.
5. Select the desired stitch pattern and adjust the stitch length and width as needed.
6. Place the fabric under the presser foot and lower the presser foot lever to hold it in place.
7. Gently press the foot pedal to start sewing. Adjust the sewing speed using the foot pedal.
8. After use, always unplug the machine from the power outlet and store it in a safe and dry location.

Frequently Asked Questions

• Q: Can children use this sewing machine?
  A: Yes, this sewing machine can be used by children aged from 8  years and above. However, adult supervision is recommended.

• Q: What should I do if the air vents are blocked?
  A: Never use the machine if the air vents are blocked. Keep the air vents of the machine and the foot pedal free from dust, fuel,  and leftovers. Clear any blockage before using the machine.

• Q: How should I dispose of this sewing machine?
  A: Do not dispose of electrical appliances as unsorted municipal waste. Contact your local government for information regarding the collection systems available for proper disposal.

Enjoy your Necchi time!

Important safety instructions

When using an electrical appliance, basic safety should always be followed, including the following:
Read all instructions before using this sewing machine.
DANGER – To reduce the risk of electric shock:

1. An appliance should never be left unattended when plugged in.
2. Always unplug this appliance from the electric outlet immediately after using and before cleaning.

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

1. Read the instruction carefully before you use the machine
2. Keep the instructions at a suitable place close to the machine and hand it over if you give the machine to a third party.
3. Use the machine only in dry locations.
4. Never leave the machine unattended with children or elderly people as they may not be able to estimate the risk.
5. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
6. Children shall not play with the appliance.
7. Cleaning and user maintenance shall not be made by children without  supervision.
8. Always switch off the machine if you carry out preparation for work (change  the needle, feed the yarn through the machine, change the footer, etc.).
9. Always unplug the machine if you leave it unattended, to avoid injury by  expediently switch on the machine.
10. Always unplug the machine if you carry out maintenance (oiling, cleaning).
11. Don’t use the machine if it’s wet or in humid environment.
12. Never pull at the cord, always unplug the machine by gripping the plug.
13. If the LED lamp is damaged or broken, it must be replaced by the  manufacturer or it’s service agent or a similarly qualified person, in order to avoid a hazard.
14. Never place anything on the pedal.
15. Never use the machine if the air vents are blocked, keep the air vents of the machine and the foot pedal free from dust, fusel and leftovers.
16. The machine must only be used with designated foot controller, in order to avoid a hazard. If the foot controller is damaged or broken, it must be replaced by the manufacturer or its service agent or a similarly qualified person.
17. The sound pressure level at normal operation is smaller than 75dB(A).
18. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
19. Contact your local government for information regarding the collection systems available.
20. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
21. When replacing old appliances with new ones, the retailer is legally obligated  to take back your old appliance for disposal at least for free of charge.
22. The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. (For outside Europe)
23. Children being supervised not to play with the appliance. (For outside  Europe)

SAVE THESE INSTRUCTIONS
This sewing machine is intended for household use only. Be sure to use the sewing machine in the temperature range from 5ºC to 40ºC.  If the temperature is excessively low, the machine can fail to operate normally. To carry the sewing machine, hold the carrying handle with your hand, and  support the sewing machine with the other hand.

DISPOSAL

• Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
• Contact your local government for information regarding the collection systems available.
• If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
• When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposal at least for free of charge.

Operation buttons

1. Reverse button
2. Auto-lock button
3. Start/stop button
4. Presser foot up/down position button
5. Needle up/down position button
6. Thread cutter button
7. Speed adjustment slider
8. Value setting buttons

Accessories

Connecting machine to power source

How to install multiple-spool holder stand

**Winding the bobbin

**

Inserting the bobbin

Threading the upper thread

Sewing mode icon introduction

Selecting stitch

1. Needle position display
2. Back to initial stitch
3. Combination mode
4. Edit mode
5. Needle up/down setting
6. Pivot setting
7. Sewing values adjustment(upper thread tension, needle position, length, width)
8. Suggested presser foot icon and reference number
9. Stitch pattern/letters category
10. Stitch pattern group
11. Stitch pattern list
12. Stitch pattern search
13. Switch pages
14. Toolbox

Setting stitch

1. Horizontal mirror function
2. Vertical mirror function
3. Elongation / Density setting
4. Balance calibration on current stitch pattern
5. Reverse sewing
6. Initial auto-lock
7. Pattern unit sewing
8. Stitch cycling setting

Changing the presser foot

Attaching the embroidery foot

Attaching the embroidery unit

Replacing the needle plate

Preparing the embroidery hoop

Embroidery mode

When the embroidery pattern is selected, you can adjust the angle, size, position and color in your preference.

1. Preview screen
2. Toolbox
3. New file
4. Save file
5. Embroidery hoop list
6. Color setting
7. Next
8. Undo/Redo
9. Zoom in/Zoom out
10. Move the patterns
11. Select all layers
12. Drag the object
13. Add new patterns
14. Switching layers
15. Layer
16. The current layer / Total layers
17. Suggested embroidery hoop
18. Embroidery pattern size
19. Embroidery pattern total stitches

Expand the toolbox to display the edit options. Click Page switching button to view other edit options.

1. Move layers
2. Text
3. Lock aspect ratio
4. Rotate
5. Horizontal mirror function
6. Vertical mirror function
7. Check the embroidery pattern size
8. Delete
9. Duplicate
10. Page switching button

Embroidery mode-Preparation

Prepare the embroidery thread, the required thread information will display on the edit page.

1. The left and right arrow button to switch the layer
2. Required presser foot icon
3. The current selected embroidery hoop size
4. Embroidery pattern size
5. Required embroidery time
6. Thread color information

The embroidery setting can adjust with the following options:

1. Thread color information
2. Thread cutter
3. Single color / multiple colors
4. Basting stitch
5. Thread tension
6. Move the patterns
7. Enlarge stitch position
8. Switch hoop position for threading

Artist Tool kit

Artist Tool

https://ezsupport.info/projects/ArtistTool/redirect.php?store=win
https://ezsupport.info/projects/ArtistTool/redirect.php?store=imac

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>