CTA ADD-PARAFSV2 Premium Floor Stand Kiosk Installation Guide
- June 15, 2024
- CTA
Table of Contents
CTA ADD-PARAFSV2 Premium Floor Stand Kiosk
Product Information
- Specifications:
- Product Name: Premium Floor Stand Kiosk with Graphic Slots & Dual VESA Plates
- Model Number: ADD-PARAFSV2 (Black), ADD-PARAFWV2 (White)
Product Usage Instructions
- Installing Base:
- To install the base of the floor stand kiosk, follow these steps:
- Align the base plate (A) with the body (J) and rotate in screw (F) from the bottom using the provided Allen key tool (C).
- Setting up Graphic Card Slot:
- To set up the graphic card slot, follow these steps:
- Slide out the (2) graphic card panels in the front and back of the body (J). If there is a sticker film, remove it first.
- If you have printed out a sticker graphic, place it onto the panel. If you are using a complete new panel, you can replace the initial panels that came with the floor stand. Place one panel back first, then the other.
- Setting up Cable Routing:
- To set up cable routing, follow these steps:
- With only one panel back in, slide in the power cords and any other cords that need to be connected to the tablet through the body as shown.
- There will be gaps at the top and bottom for them to route out to the power source and to the device.
- Slide in the second panel when routing is finished.
- Attach Dual VESA Plate:
- To attach the dual VESA plate, follow these steps:
- First, with all the items aligned, route any wires through the plate’s openings.
- Then rotate in screws (G) and washers (E) from the top using the provided tool (C) as illustrated.
- FAQ:
- Q: Can I use items H & I with this product?
- A: No, items H & I will not be used in this package. They are only compatible with other VESA items or CTA specific enclosures, items, and kits.
- Q: What is the customer support number?
- A: You can contact customer support at 888-733-4448.
CONTENTS
INSTALLATION
- INSTALLING BASE:
- 1A. ALIGN BASE PLATE (A) WITH THE BODY (J) AND ROTATE IN SCREW (F) FROM THE BOTTOM USING THE PROVIDED ALLEN KEY TOOL (C).
- SETTING UP GRAPHIC CARD SLOT
- 2A. SLIDE OUT THE (2) GRAPHIC CARD PANELS IN THE FRONT AND BACK OF THE BODY (J). IF THERE IS A STICKER FILM, REMOVE THAT FIRST. IF YOU HAVE PRINTED OUT A STICKER GRAPHIC, PLACE IT ONTO THE PANEL. IF YOU ARE USING A COMPLETE NEW PANEL, YOU CAN REPLACE THE INITIAL PANELS THAT CAME WITH THE FLOOR STAND. PLACE ONE PANEL BACK FIRST, THEN THE OTHER.
- SETTING UP CABLE ROUTING
- 3A. WITH ONLY (1) PANEL BACK IN, SLIDE IN THE POWER CORDS AND ANY OTHER CORDS THAT WOULD NEED TO BE CONNECTED TO THE TABLET THROUGH THE BODY AS SHOWN. THERE WILL BE GAPS AT THE TOP AND BOTTOM FOR THEM TO ROUTE OUT TO THE POWER SOURCE AND TO THE DEVICE. SLIDE IN SECOND PANEL WHEN ROUTING IS FINISHED.
- ATTACH DUAL VESA PLATE
- 5A. FIRST, WITH ALL THE ITEMS ALIGNED, ROUTE ANY WIRES THROUGH THE PLATE’S OPENINGS.
- 5B. THEN ROTATE IN SCREWS(G) AND WASHERS(E) FROM THE TOP USING PROVIDED TOOL (C) AS ILLUSTRATED.
CONTACT
- 36 Taaffe Place Brooklyn, NY 11205
- support@ctadigital.com.
- 888-733-4448
- www.ctadigital.com.
- ADD-PARAFSV2 / ADD-PARAFWV2
Premium Floor Stand Kiosk with Graphic Slots & Dual VESA Plates (Black/White)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>